voltage controlled crystal oscillators (vcxo) surface mount type KV5032L series lv-pecl/ 3.3v/ 5.0 3.2mm rohs compliant features ? high frequency to 170mhz ? lv-pecl output ? miniature ceramic package ? low phase noise table 1 freq. tol. operating temperature range ( c) note code 10 ? 6 0 50 ? 10 to + 70 standard speci cations s 30 please contact us for available frequencies. g 50 ? 40 to + 85 how to order KV5032L 100.000 p 3 ? j 00 ? ? ???? ? ? series ? output frequency ? output type (lv-pecl) ? supply voltage (3.3v) ? frequency tolerance (see table 1) ? symmetry/ inh function/ apr (45/ 55%, disable/ apr50) j : low phase noise ? individual speci cation (std speci cation is 00) y packaging (tape & reel 1000 pcs./ reel) speci cations item symbol conditions min. max. units output frequency range note1 fo 100 170 mhz frequency tolerance f _tol initial tolerance, operating temperature range, rated power supply voltage change, load change, aging (1 year @25 c), shock and vibration op. temp.: ? 10 to + 70 c/ ? 40 to + 85 c ? 50 + 50 10 ? 6 op. temp.: ? 10 to + 70 c ? 30 + 30 absolute pull range apr standard speci cations 50 10 ? 6 extend (option) 100 frequency aging f _age per 20years @25 c ? 20 + 20 10 ? 6 control voltage v c 0 + 3.3 v storage temperature range t _stg ? 55 + 125 c operating temperature range t _use standard speci cations 0 + 70 c extend (option) ? 40 + 85 max. supply voltage ? 0.3 + 5.0 v supply voltage v cc + 2.97 + 3.63 v current consumption i cc 8 5m a disable current i _ dis 5m a symmetry sym 50ohm @crossing point 45 55 % rise/ fall time(20% to 80% output level) tr/ tf 50ohm 0.7 ns low level output voltage note2 v ol v cc ? 1.620 v high level output voltage note2 v oh v cc ? 1.025 v output load lv-pecl output 50 ohm input voltage range v in 0 + 3.3 v low level input voltage note2 v il 30% v cc v high level input voltage note2 v ih 70% v cc v input resistance 10 mohm disable time t _dis 200 ns enable time t _ena 2 0m s start-up time t _str @minimum operating voltage to be 0 sec. 10 ms phase jitter j phase @122.88mhz bw : 12khz to 20mhz 0.3 ps phase noise @122.88mhz @10hz offset typ. ? 71 dbc/ hz @100hz offset typ. ? 102 @1khz offset typ. ? 128 @10khz offset typ. ? 146 @100khz offset typ. ? 152 @1mhz offset typ. ? 156 @10mhz offset typ. ? 157 note : all electrical characteristics are defined at the maximum load and operating temperature range. note1: please contact us for inquiry about operating temperature range, available frequencies and other conditions. note2: dc characteristic dimensions (unit: mm) recommended land pattern (unit: mm) plating: ni au tolerance: r 0.2 inh function pad2 pad4/ pad5(output) open active "h" level active "l" level high z( no-oscillation) pad connections #1 vc control y #2 enable/ disable #3 case gnd #4 output #5 complementary output #6 v cc 5.0 1.45 3.2 3.2 2.5 0.4 0.64 1.27 1.27 1.20 1.0 marking area #1 #2 #3 #6 #5 #4 note: a capacitor of value 0.01 p f between v cc and gnd is recommended. 1.6 2.6 0.89 1.27 1.27 a s o f m a r c h 2 0 1 8
|