page 1 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com case style: dq849 the big deal ? integrated matching, dc blocks and bias circuits ? excellent active directivity ? operates over 2.8-5v product overview MNA-5A+ is a wideband phemt based mmic amplifer with high active directivity. mna integrates the en - tire matching network and majority of the bias circuit inside the package, reducing the need for complicated external circuits. this approach makes the mna amplifer extremely straightforward to use. this design op - erates on a single 2.8 to 5v supply, is well matched for 50 ? and comes in a tiny, low profle 3x3mm 8-lead mclp package accommodating dense circuit board layouts. feature advantages excellent active directivity (isolation- gain) 15-22 db ideal for use as a buffer amplifer minimizing interaction of adjacent circuits integrates dc blocks and rf choke minimizes external components, component count and circuit area. single 2.8 to +5v operation amplifer can be used at low voltage such as +3v or standard +5v. +5v operation results in higher p1db and oip3. 3 x 3mm 8-lead mclp package tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to the pcb. key features 50 ? 0.5 to 2.5 ghz MNA-5A+ high directivity monolithic amplifer
page 2 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com product features ? choice of supply voltage, 2.8v to 5v ? micro-miniature size .120x.120 ? internal dc blocking at rf input and output ? high directivity, 15-22 db typ. ? low noise fgure, 3.1 db typ. at 2 ghz ? output power, up to +14 dbm typ. ? aqueous washable MNA-5A+ rev. or m154121 MNA-5A+ rs/cp 160318 0.5-2.5 ghz case style: dq849 general description MNA-5A+ is a wideband phemt based mmic amplifer with high active directivity. mna integrates the entire matching network and majority of the bias circuit inside the package, reducing the need for complicated exter - nal circuits. this approach makes the mna amplifer extremely straightforward to use. this design operates on a single 2.8 to 5v supply, is well matched for 50 ? and comes in a tiny, low profle 3x3mm 8-lead mclp package accommodating dense circuit board layouts. function pad number description (see fig 1) rf-in 2 rf input pin rf-out 5 rf output pin dc 7,8 dc bias pads 7,8. pad 7 connected to ground via 1000 pf. pad 8 connected to pad 7 via 33 ohms. nc 1,3,4,6 not connected, connect pad 3 and 4 to ground externally gnd paddle ground optional 1,6 no internal connection; recommended use: per pcb layout pl-078 typical applications ? buffer amplifer ? cellular ? pcn ? communications satellite ? defense simplifed schematic and pad description high directivity monolithic amplifer +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com MNA-5A+ 5. permanent damage may occur if any of these limits are exceeded. these ratings are not intended for continuous normal operation absolute maximum ratings 5 parameter ratings operating temperature -40c to 85c storage temperature -55c to 100c dc voltage 7v at pad 7 (on tb-186+) 1v at pads 2 & 5 power dissipation 700 mw input power 5 dbm (continuous operation) 28 dbm (5 minutes max) electrical specifcations 1 at 25c parameter condition (ghz) vs=5v vs=2.8v units min. typ. max. typ. frequency range 0.5 2.5 0.5-2.5 ghz gain 0.5 21.6 20.5 db 0.75 23.3 21.9 1.0 23.5 21.9 1.5 22.8 21.0 2.0 19.1 21.3 23.4 19.4 2.5 19.2 17.4 input return loss 0.5 5.4 5.6 db 0.75 10.4 10.8 1.0 14.9 15.3 1.5 21.4 20.8 2.0 21.6 21.1 2.5 17.1 17.2 output return loss 0.5 14.5 14.4 db 0.75 15.4 23.1 1.0 12.8 17.4 1.5 11.6 15.3 2.0 12.2 15.3 2.5 12.8 15.7 output power at p1db 0.5 12.6 11.0 dbm 0.75 12.1 10.8 1.0 11.1 10.1 1.5 10.4 9.4 2.0 9.6 8.4 2.5 8.7 7.5 output ip3 0.5 23.8 21.8 dbm 0.75 23.8 21.7 1.0 22.3 20.6 1.5 21.3 19.6 2.0 20.1 18.5 2.5 19.1 17.5 noise figure 0.5 3.2 3.3 db 0.75 3.3 3.2 1.0 3.0 3.0 1.5 3.0 3.1 2.0 3.1 3.2 2.5 3.2 3.2 directivity (isolation-gain) 0.5 20.3 22.5 db 0.75 20.9 21.5 1.0 19.7 19.3 1.5 17.4 16.9 2.0 16.6 16.2 2.5 17.3 16.6 dc current 34 43 31.8 ma device current variation vs. temperature (2) 15 5 a/c device current variation vs voltage 0.0004 3 0.0014 4 ma/mv thermal resitance at 85c 64 64 c/w 1. measured on mini-circuits characterization test board tb-186+. see characterization test circuit (fig. 1) 2. (current at 85c -current at -45c)/130 3. (current at 5.25v-current at 3.9v)/1.35 4. (current at 3.9v-current at 2.66v)/1.24 monolithic mmic amplifer
page 4 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com product marking - MNA-5A+ mcl mn5a fig 1 . block diagram of test circuit used for characterization. (dut soldered on mini-circuits characterization test board tb-313) gain, return loss, output power at 1db compression (p1 db) , output ip3 (oip3) and noise fgure measured using agilents n5242a pna-x microwave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart, -5dbm/tone at output. characterization & application test circuit recommended application circuit fig 2 . test board includes case, connectors, and components soldered to pcb monolithic mmic amplifer
page 5 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com MNA-5A+ esd rating human body model (hbm): class 1a (250 to <500v) in accordance with ansi/esd stm 5.1 - 2001 machine model (mm): class m1 (>25v) in accordance with ansi/esd stm5.2-1999 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style dq849 3x3x0.9 mm mclp plastic package, exposed paddle lead fnish: tin-silver over nickel tape & reel f104 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500, 1k, or 2k devices suggested layout for pcb design pl-078 evaluation board tb-186-5a+ environmental ratings env08t1 additional detailed technical information additional information is available on our dash board. to access this information click here additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish monolithic mmic amplifer
|
