View B39741B8624P810_8914457.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte band xvii series/type: ordering code: b8624 B39741B8624P810 date: version: january 17, 2014 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 january 17, 2014 b8624 710.0 / 740.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone lte band xvii systems n low insertion attenuation n low amplitude ripple n usable passband 12 mhz n 50 w single-ended in both in antenna-rx and tx-antenna paths features n package size 2.0 x 1.6 mm 2 n max. package height 0.47mm n rohs compatible n approx. weight 0.006 g n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 bottom view side view top view 1 2 3 5 6 7 8 4 9 0.43 0.33 0.35 0.29 0.7 0.47 max. 7 5 2 6 1 3 8 4 2.0 1.6 0.29 pin configuration n 3 tx input n 1 rx output n 6 antenna n 2,4,5,7,8,9 to be grounded 1 6 2,4,5 3 7,8,9
3 january 17, 2014 b8624 710.0 / 740.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +90 ?c ant terminating impedance: z ant = 50 w || 13nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics tx - antenna min. typ. @ 25?c max. center frequency f c 710.0 mhz maximum insertion attenuation a 704.0 ... 716.0 mhz 1.5 2.1 db amplitude ripple (p-p) da 704.0 ... 716.0 mhz 0.5 1.1 db error vector magnitude @f carrier 706.4 ... 713.6 mhz evm 1) 1) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.2 3.0 % @f carrier 706.4 ... 713.6 mhz evm 1) 1.2 2.0 2) 2) at room temperature, 25 ?c % input vswr (tx port) 704.0 ... 716.0 mhz 1.4 2.0 output vswr (ant port) 704.0 ... 716.0 mhz 1.3 2.0
4 january 17, 2014 b8624 710.0 / 740.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C20 ?c to +90 ?c ant terminating impedance: z ant = 50 w || 13nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics tx - antenna min. typ. @ 25?c max. attenuation a 10.0 ... 690.0 mhz 30 36 db 690.0 ... 698.0 mhz 4 12 db 722.0 ... 728.0 mhz 2.5 7 db 729.0 ... 734.0 mhz 30 35 db 734.0 ... 746.0 mhz 50 60 db 746.0 ... 768.0 mhz 35 43 db 768.0 ... 805.0 mhz 25 39 db 869.0 ... 894.0 mhz 30 38 db 1408.0 ... 1432.0 mhz 35 42 db 1559.0 ... 1563.0 mhz 40 43 db 1565.4 ... 1573.4 mhz 40 43 db 1573.4 ... 1577.5 mhz 40 43 db 1577.5 ... 1585.4 mhz 40 44 db 1597.6 ... 1605.9 mhz 40 44 db 1805.0 ... 1880.0 mhz 40 45 db 1930.0 ... 1990.0 mhz 40 46 db 2110.0 ... 2155.0 mhz 42 47 db 2155.0 ... 2170.0 mhz 42 48 db 2400.0 ... 2484.0 mhz 42 49 db 2816.0 ... 2864.0 mhz 40 47 db 4900.0 ... 5950.0 mhz 16 22 db
5 january 17, 2014 b8624 710.0 / 740.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +90 ?c ant terminating impedance: z ant = 50 w || 13nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics antenna - rx min. typ. @ 25?c max. center frequency f c 740.0 mhz maximum insertion attenuation a 734.0 ... 746.0 mhz 1.8 2.2 db amplitude ripple (p-p) da 734.0 ... 746.0 mhz 0.4 0.9 db input vswr (ant port) 734.0 ... 746.0 mhz 1.4 2.0 output vswr (rx port) 734.0 ... 746.0 mhz 1.5 2.0 attenuation a 10.0 ... 674.0 mhz 40 55 db 674.0 ... 686.0 mhz 40 59 db 686.0 ... 704.0 mhz 40 59 db 704.0 ... 716.0 mhz 55 64 db 716.0 ... 727.0 mhz 15 25 db 727.0 ... 728.0 mhz 8 20 db 777.0 ... 793.0 mhz 33 40 db 793.0 ... 805.0 mhz 45 52 db 814.0 ... 1710.0 mhz 40 51 db 1710.0 ... 1755.0 mhz 50 63 db 1850.0 ... 1910.0 mhz 45 60 db 2202.0 ... 2238.0 mhz 45 56 db 2400.0 ... 2500.0 mhz 45 55 db 4900.0 ... 5140.0 mhz 40 47 db 5140.0 ... 5950.0 mhz 30 35 db
6 january 17, 2014 b8624 710.0 / 740.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C20 ?c to +90 ?c ant terminating impedance: z ant = 50 w || 13nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics antenna - rx min. typ. @ 25?c max. imd product level limits 1) at f tx =710.0 mhz, f rx =740.0 mhz 1) imd product level limits for power levels p tx =21.5dbm (antenna port output power) and p blocker =-15dbm (antenna port input power) blocker 1 30.0 mhz -128 -110 dbm blocker 2 674.0 ... 686.0 mhz -110 -100 dbm blocker 3 1438.0 ... 1462.0 mhz -110 -100 dbm blocker 4 2142.0 ... 2178.0 mhz -126 -110 dbm
7 january 17, 2014 b8624 710.0 / 740.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +90 ?c ant terminating impedance: z ant = 50 w || 13nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics tx - rx min. typ. @ 25?c max. isolation a 704.0 ... 709.0 mhz 59 62 db 709.0 ... 716.0 mhz 60 65 db 734.0 ... 735.0 mhz 55 59 db 735.0 ... 738.0 mhz 55 59 db 738.0 ... 742.0 mhz 58 63 db 742.0 ... 746.0 mhz 55 62 db 1408.0 ... 1432.0 mhz 30 63 db 2112.0 ... 2148.0 mhz 30 56 db 2816.0 ... 2864.0 mhz 30 52 db
8 january 17, 2014 b8624 710.0 / 740.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet maximum ratings storage temperature range t stg C40/+85 1) 1) extended upperlimit: 96h@125?c acc. to iec 60068-2-2 bb ?c dc voltage v dc 5 2) 2) 168h damp heat steady state acc. to iec 60068-2-67 cy. v esd voltage v esd 100 3) 3) acc. to jesd22-a115b (mm - machine model), 10 negative and 10 positive pulses. v machine model input power at p in 706.5 ... 713.5 mhz elsewhere 29 10 dbm dbm lte uplink 5mhz 50?c, 5000 h }
9 january 17, 2014 b8624 710.0 / 740.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-antenna frequency response tx-antenna (wideband)
10 january 17, 2014 b8624 710.0 / 740.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response antenna-rx frequency response antenna-rx (wideband)
11 january 17, 2014 b8624 710.0 / 740.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx frequency response tx-rx (wideband)
12 january 17, 2014 b8624 710.0 / 740.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet return loss s 11 tx-port s 22 antenna-port s 33 rx-portreferences
13 january 17, 2014 b8624 710.0 / 740.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b8624 ordering code B39741B8624P810 marking and package c61157-a8-a38 packaging f61074-v8247-z000 date codes l_1126 s-parameters b8624_nb_un.s3p, b8624_wb_un.s3p see file header for pin/port assignment. soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
14 january 17, 2014 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39741B8624P810

	To Download B39741B8624P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .