technical data sheet adaptor smp plug C sma jack 19S132-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances acc. iso 2768 m-h interface according to smp side: mil-std-348 sma side: iec 60169-15; en 122110; mil-std-348 documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m , over chemical nickel outer contact smp side stainless steel passivated outer contact sma side stainless steel passivated dielectric ptfe
technical data sheet adaptor smp plug C sma jack 19S132-K00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg f(ghz) electrical data impedance 50 w frequency dc to 26.5 ghz return loss 3 32 db, dc to 4 ghz 3 22 db, 4 to 10 ghz 3 15 db, 10 to 26.5 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance 6.0 m w , smp side; 3 m w , sma side outer contact resistance 2.0 m w , smp side; 2 m w , sma side test voltage 500 v rms working voltage 335 v rms contact current 1.2a dc max. mechanical data smp side sma side mating cycles 3 500 min. 500 center contact captivation: axial 3 27 n 3 27 n engagement force n/a - limited detent 45 n max. disengagement force n/a - limited detent 9 n min. coupling test torque n/a max. 1.7 nm recommended torque n/a 0.8 nm to 1.1 nm environmental data temperature range -65c to +155c thermal shock mil-std-202, method 107, condition b vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition a moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a weight weight 5.0 g/pce draft date approved date rev. engineering change n umber name date inge mhlauer 24/08/04 j_krautenbacher 15.07.16 e0 0 15-1629 i_wallner 15.07.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the e ffort to improve our products, we reserve the right to make changes judg ed to be necessary.
|