AXE5032P rev.1 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 1(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXE5032P rev.: 1 date: 2014-04-04 oscillator type: programmable crystal oscillator in 5x3.2 mm package parameter min. typ. max. unit condition frequency range 1 1 1 133 100 66 mhz mhz mhz v s = 5 v v s = 3.3 v v s = 2.7 v programmable frequencies any discrete frequency at delivery frequency stability overall stability 100 50 25 ppm ppm ppm option 2 = 100 option 2 = 50 option 2 = 25 long term (aging) per year 5 ppm @ 25c rf output signal waveform hcmos load 15 pf rise & decay time 5 ns symmetry (duty cycle) 40 60 % @ v s /2 start-up time 2 ms jitter (rms) 50 40 ps ps freq 33 mhz freq > 33 mhz output enable/disable (oe) input open or high: rf output low: tri-state output supply voltage v s 2.5 3.0 4.5 2.7 3.3 5.0 3.0 3.6 5.5 v v v option 1 = 27 option 1 = 33 option 1 = 50 current consumption (steady state, unloaded) 20 25 45 ma ma ma option 1 = 27 option 1 = 33 option 1 = 50 operating temperature range 0 -20 -40 +70 +70 +85 c c c option 3 = 0c option 3 = 2c option 3 = 4c enclosure (see drawing) (lxwxh) 5.16x3.35x1.3 max. mm iec 61837-2 weight 2 g packing bulk or tape & reel iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd storage temperature -55 +125 c ordering code model option 1 [supply voltage] option 2 [stability] option 3 [temperature range] revision frequency [mhz] AXE5032P 27, 33, 50 25 0c rev.1 12.345678 example: AXE5032P-50-25-0c_rev.1 C 12.345678 mhz
AXE5032P rev.1 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 2(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections pin # symbol function 1 oe output enable/disable 2 gnd ground 3 rf out rf output 4 vs supply voltage handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
AXE5032P rev.1 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 3(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d1 01.10.2012 editorial changes bn bn 1 d2 04.04.2014 environmental conditions updated, e ditorial changes hh hh
|