designed and manufactured in germany designed and manufactured in germany AXE40 rev.1 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 1(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXE40 rev.: 1 date: 2014-04-04 oscillator type: low phase noise vhf/uhf spxo (no p ll) with lvpecl or sine wave output parameter min. typ. max. unit condition frequency range 60 400 mhz frequency stability ppm initial tolerance 5 ppm vs. operating temperature range 10 ppm (note 2) vs. supply voltage variation 2 ppm v s 5% vs. load change 2 ppm load 5% long term (aging) per year 2 ppm @ 40c frequency adjustment range electronic frequency control (efc) n.a. ppm on r equest rf output signal waveform sine wave lvpecl complementary option 1 = s option 1 = l output level (option 1 = s) +0 dbm r l = 50 ? (note 3) harmonics (option 1 = s) -30 dbc sub-harmonics (note 4) -40 dbc output levels (option 1 = l) high (v oh ) low (v ol ) 2.215 1.470 2.345 1.595 2.420 1.745 v v r l = 50 ? to v s - 2 v (note 5) supply voltage v s 3.15 4.75 3.3 5.0 3.45 5.25 v v option 2 = 33 option 2 = 50 current consumption (steady state) 40 ma (note 6) operating temperature range -20 +70 c enclosure (see drawing) (lxwxh) 20.5x20.5x12.5 max. mm iec 60679-3 co 41 weight 8 g packing palette iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. other stabilities over temperature on request 3. higher output level on request 4. for frequencies above 100 mhz sub-harmonics may be present. please consult factory 5. output levels vary 1:1 with v s 6. current consumption depends on frequency, supply vo ltage and output option absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd storage temperature -55 +125 c
designed and manufactured in germany designed and manufactured in germany AXE40 rev.1 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 2(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg ordering code model option 1 [rf output] option 2 [supply voltage] revision frequency [mhz] AXE40 s or l 50 rev.1 350.000 example: AXE40-s-50_rev.1 C 350.000 mhz enclosure drawing pin connections: pin # symbol function 1 n.c. q no connection (option s) rf output ( q ) (option l) 2 rf out rf output (q) 3 gnd ground 4 n.c. no connection 5 v s supply voltage handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
designed and manufactured in germany designed and manufactured in germany AXE40 rev.1 www.axtal.com roemerring 9 drawing d2 fon: +49 (6261) 939834 d-74821 mosbach page 3(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d1 01.10.2012 editorial changes bn bn 1 d2 04.04.2014 environmental conditions updated, e ditorial changes hh hh
|