product data sheet H361awk safety switch , 30a, 600v, fusible, heavy duty, 3-pole list price $637.00 usd availability stock item: this item is normally stocked in our distribution facility. depth 4.96 inches height 14.60 inches width 6.63 inches action single throw ampere rating 30a approvals ul listed catalog reference number 3100ct9801 electrical interlock none enclosure rating nema 3r/12 enclosure material galvannealed steel enclosure type rainproof, sleet/ice proof and dust tight (indoor/outdoor) factory installed neutral no disconnect type fusible terminal type lugs mounting type surface wire size #12 to #2 awg(al) or #14 to #2 awg(cu) type of duty heavy duty short circuit current rating 10ka (class h or k) - 200ka (class r,j or l) number of poles 3-pole maximum voltage rating 600v technical characteristics category 00113 - safety switch, heavy duty, nema12, 2 & 3 pole, 30 - 200 amp discount schedule de1 article number 785901481997 package quantity 1 weight 10.57 lbs. availability code stock item: this item is normally stocked in our distribution facility. returnability y shipping and ordering as standards, specifications, and designs change from time to time, please ask for confirmation of the information given in this document. generated: 06/18/2009 02:13:46 ? 2009 schneider electric. all rights reserved. 1
www.schneider-electric.us 3 safety switches ? 2009 schneider electric all rights reserved 3-5 heavy duty safety switches 600 volt class 3110 class h fuse provisions: fusible square d 30 through 600 a heavy duty safety switches accept class h fu ses as standard. with class h fuses installed, the switch is ul listed for use on s ystems with up to 10 ka available fault current. class r fuse provisions: fusible square d 30?600 a heavy duty safety switches will acc ept class r fuses as standard. a field-installed rejection kit is available which, when inst alled, rejects all but class r fuses. with the installation of the rejection kit and class r fuses, the switch is ul listed for use on systems with up to 200 ka available fault curr ent. see class r fuse kits on page 3-11. class j fuse provisions: provisions for installing class j fuses are included in 30 through 400 a 600 volt, and 100 through 400 a 240 volt, fusible heavy duty safety switches. conv ersion to class j fuse spacing requ ires relocating the load side fuse base assembly from the standard class h fuse location to an alte rnate position as marked in the enclosure. with class j fuses installed, the switch is ul listed for use on systems with up to 200 ka available fault current. switches rated 600 a, 240 or 600 volt, require the addition of an adapter kit, h600j at $456. one kit per 3p switch. class l fuse provisions: fusible 800 a and 1200 a safety switches use class l bolt-in fu ses and are rated for use on systems with up to 200 ka at 600 vac maximum. 1200 a switches accept class l fu ses from 601?1200 a, 800 a switches accept class l fuses from 601?800 a. accessories: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pages 3-11 through 3-13 dimensions: nema 1 and 3r . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-14 dimensions: nema 4, 4x and 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-15 table 3.9: 600 volts?single throw fusible system amperes nema 1 indoor nema 3r rainproof (bolt-on hubs, page 3-11) nema 4, 4x, 5 a 304 stainless steel (for 316 stainless, see page 3-7) dust tight, watertight, corrosion resistant (watertight hubs, page 3-11) nema 12k with knockouts (watertight hubs, page 3-11) nema 12, 3r b without knockouts (watertight hubs, page 3-11) horsepower ratings c 480 vac 600 vac dc e std. (using fast acting, one time fuses) max. (using dual element, time delay fuses) std. (using fast acting, one time fuses) max. (using dual element, time delay fuses) cat. no. $ price cat. no. $ price cat. no. $ pric e cat. no. $ price cat. no. $ price 3? 3? 3? 3? 250 600 2-wire (2 blades and fuseholders)?600 vac, 600 vdc 30 use three-wire devices for two-wire applications ? ????? 60 ? ????? 100 ? ????? 200 ? ????? 400 h265 4206.00 h265r 5424.00 h265ds 14961.00 ? ? h265awk 5025.00 100 d 250 d ?? 50 50 600 h266 6653.00 h266r 10686.00 h266ds 21399.00 ? ? h266awk 7341.00 150 d 400 d ?? 50 50 800 h267 10365.00 h267r g 16385.00 ? ? ? ? h267awk 15276.00 ? ? ? ? 50 50 1200 h268 14570.00 h268r g 17991.00 ? ? ? ? h268awk 18044.00 ? ? ? ? 50 50 3-wire (3 blades and fuseholders)?600 vac, 600 vdc e 30 H361 528.00 H361rb 899.00 H361ds 2520.00 H361a 1014.00 H361awk 956.00 5157-1/220515 30 H361-2 f 617.00 H3612rb f 1049.00 ? ? H361-2a f 1035.00 H3612awk f 977.00 5157-1/220 ? 15 60 h362 638.00 h362rb 1055.00 h362ds 2771.00 h362a 1047.00 h362awk 984.00 15 30 15 50 ? 30 100 h363 1188.00 h363rb 1644.00 h363ds 5493.00 h363a 1626.00 h363awk 1539.00 25 60 30 75 ? 50 200 h364 1707.00 h364rb 2259.00 h364ds 7685.00 h364a 2544.00 h364awk 2400.00 50 125 60 150 40 50 400 h365 4551.00 h365r 5532.00 h365ds 15321.00 ? ? h365awk 5462.00 100 250 125 350 50 50 600 h366 7649.00 h366r 10899.00 h366ds 21084.00 ? ? h366awk 9203.00 150 400 200 500 50 50 800 h367 13319.00 h367r g 16500.00 ? ? ? ? h367awk 16352.00 200 500 250 500 50 50 1200 h368 17507.00 h368r g 20009.00 ? ? ? ? h368awk 19706.00 200 500 250 500 50 50 4-wire (3 blades and fuseholders, 1 neutral)?600 vac, 600 vdc e 30 H361n 617.00 H361nrb 986.00 use three-wire devices field-installed solid neutral assemblies. order separately. see page 3-12. 5157-1/220 ? 15 60 h362n 710.00 h362nrb 1134.00 15 30 15 50 ? 30 100 h363n 1278.00 h363nrb 1737.00 25 60 30 75 ? 50 200 h364n 1869.00 h364nrb 2408.00 h364nds 7871.00 h364na 2715.00 h364nawk 2558.00 50 125 60 150 40 50 400 h365n 4898.00 h365nr 5765.00 h365nds 15668.00 ? ? h365nawk 5823.00 100 250 125 350 50 50 600 h366n 8019.00 h366nr 11054.00 h366nds 22122.00 ? ? h366nawk 9600.00 150 400 200 500 50 50 800 h367n 14043.00 h367nr g 17205.00 ? ? ? ? h367nawk 17253.00 200 500 250 500 50 50 1200 h368n 18114.00 h368nr g 20993.00 ? ? ? ? h368nawk 20820.00 200 500 250 500 50 50 4-wire (4 blades and fuseholders)?600 vac, 600 vdc h 2? 2? 2? 2? 30 h461 914.00 ? ? h461ds 2937.00 ? ? h461awk 1115.00 7-1/2 20 10 25 5 15 60 h462 1065.00 ? ? h462ds 3069.00 ? ? h462awk 1257.00 15 40 20 50 10 30 100 h463 1778.00 ? ? h463ds 8345.00 ? ? h463awk 1932.00 25 50 30 75 20 30 200 h464 2957.00 ? ? h464ds 12596.00 ? ? h464awk 3222.00 50 ? 50 ? 40 50 400 h465 6210.00 ? ? ? ? ? ? h465awk 6807.00 100 250 125 350 50 50 600 h466 10104.00 ? ? ? ? ? ? ? ? 150 400 200 500 50 50 6-wire (6 blades and fuseholders)?600 vac h 3? 3? 3? 3? 100 ?? ? ? h663ds 25964.00 ? ? h663awk 5112.00 25 60 30 75 ?? 200 ?? ? ? h664ds 35393.00 ? ? h664awk 12222.00 for applications requiring motor disconnect capability, use electrical interlock. refer to page 3-11. a complete rating is nema 3, 3r, 4, 4x, 5 and 12. b also suitable for nema 3r application by removing drain screw from bottom endwall. c refer to page 7-35 for additional motor application data. the starting current of motors of more than standard horsepower may r equire the use of fuses with appropriate time delay characteristics. d for corner grounded delta systems only and with neutral assembly installed. use switching poles for ungrounded conductors. e on 3p devices, use two outside poles for switching dc. f 60 a switch with 30 a fuse spacing and clips. must use 60 a enclosure accessories in cluding electrical interlocks. g suitable for nema 5 applications with drain screw installed. h not suitable for use as service equipment. class r fuse de1 discount schedule
|
