this is information on a product in full production. november 2013 docid023605 rev 3 1/9 STPSC20H065C 650 v power schottky silicon carbide diode datasheet - production data features ? no or negligible reverse recovery ? switching behavior independent of temperature ? dedicated to pfc applications ? high forward surge capability description the sic diode is an ultrahigh performance power schottky diode. it is ma nufactured us ing a silicon carbide substrate. the wide band gap material allows the design of a schottky diode structure with a 650 v rating. due to the schottky construction, no recovery is shown at turn-off and ringing patterns are negligible. the minimal capacitive turn-off behavior is independent of temperature. especially suited for use in pfc applications, this st sic diode will boost the performance in hard switching conditions. its high forward surge capability ensures a good robustness during transient phases. k (2) a1 (1) a2 (3) a1 k a2 a1 k a2 to-220ab STPSC20H065Ct to-247 STPSC20H065Cw table 1. device summary symbol value i f(av) 2 x 10 a v rrm 650 v t j (max) 175 c www.st.com
characteristics STPSC20H065C 2/9 docid023605 rev 3 1 characteristics when the two diodes 1 and 2 are used simultaneously: ? t j (diode 1) = p(diode 1) x r th(j-c) (per diode) + p(diode 2) x r th(c) to evaluate the conduction loss es use the following equation: p = 1.35 x i f(av) + 0.115 x i f 2 (rms) table 2. absolute ratings (limiting values per diode at 25 c unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 650 v i f(rms) forward rms current 22 a i f(av) average forward current t c = 135 c (1) , dc, per diode 1. value based on r th(j-c) max (per diode) 10 a t c = 125 c (2) , per device 2. value based on r th(j-c) max (per device) 20 i fsm surge non repetitive forward current t p = 10 ms sinusoidal, t c = 25 c t p = 10 ms sinusoidal, t c = 125 c t p = 10 s square, t c = 25 c 90 80 470 a i frm repetitive peak forward current t c = 135 c (1) , t j = 175 c, ? = 0.1 36 a t stg storage temperature range -55 to +175 c t j operating junction temperature (3) 3. condition to avoid thermal runaway for a diode on its own heatsink -40 to +175 c table 3. thermal resistance symbol parameter value unit typ. max. r th(j-c) junction to case per diode per diode to-247 1.25 1.5 c/w to-220ab to ta l to-247 0.83 0.95 to-220ab r th(c) coupling 0.4 table 4. static electrical characteristics per diode symbol parameter tests conditions min. typ. max. unit i r (1) 1. t p = 10 ms, ? < 2% reverse leakage current t j = 25 c v r = v rrm -9100 a t j = 150 c - 85 425 v f (2) 2. t p = 500 s, ? < 2% forward voltage drop t j = 25 c i f = 10 a -1.561.75 v t j = 150 c - 1.98 2.5 dptot dtj --------------- 1 rth j a ? ?? ------------------------- - ?
docid023605 rev 3 3/9 STPSC20H065C characteristics 9 table 5. dynamic electrical characteristics per diode symbol parameter test conditions typ. unit q cj (1) total capacitive charge v r = 400 v 28.5 nc c j total capacitance v r = 0 v, t c = 25 c, f = 1 mhz 480 pf v r = 400 v, t c = 25 c, f = 1 mhz 48 1. most accurate value for the capacitive charge: q = c j (v r ).dv r cj v out 0 figure 1. forward voltage drop versus forward current (typical values per diode, low level) figure 2. forward voltage drop versus forward current (typical values per diode, high level) a) i fm ( 0 2 4 6 8 10 12 14 16 18 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 t a =150 c t a =175 c t a =25 c pulse test : t p =500s t a =100 c v fm (v) 0 10 20 30 40 50 60 70 80 90 100 012345678 t a =150 c t a =175 c t a =25 c pulse test : t p =500s t a =100 c i fm (a) v fm (v) figure 3. reverse leakage current versus reverse voltage applied (typical values per diode) figure 4. peak forward current versus case temperature, per diode i r (a) 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 0 50 100 150 200 250 300 350 400 450 500 550 600 650 t j =25 c t j =150 c t j =175 c v r (v) i m (a) 0 10 20 30 40 50 60 70 80 0 25 50 75 100 125 150 175 = 0.5 = 0.1 = 0.3 = 1 = 0.7 t =tp/t tp t c (c)
characteristics STPSC20H065C 4/9 docid023605 rev 3 figure 5. junction capacitance versus reverse voltage applied (typical values, per diode) figure 6. relative variation of thermal impedance junction to case versus pulse duration per diode 0 50 100 150 200 250 300 350 400 450 500 0.1 1.0 10.0 100.0 1000.0 f=1 mhz v osc =30 mv rms t j =25 c v r (v) c j (pf) z th(j-c) /r th(j-c) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-05 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 single pulse t p (s) figure 7. non-repetitive peak surge forward current versus pulse duration per diode (sinusoidal waveform) figure 8. total capacitive charges versus reverse voltage applied (typical values per diode) i fsm (a) 1.e+01 1.e+02 1.e+03 1.e-05 1.e-04 1.e-03 1.e-02 t a =25 c t a =125 c t p (s) 0 4 8 12 16 20 24 28 32 0 50 100 150 200 250 300 350 400 v r (v) q cj (nc)
docid023605 rev 3 5/9 STPSC20H065C package information 9 2 package information ? epoxy meets ul94, v0 ? cooling method: conduction (c) ? recommended torque value: ? to-220ab 0.4 to 0.6 nm, ? to-247 0.55 nm (1.0 nm maximum) in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions a nd product status are available at: www.st.com . ecopack ? is an st trademark. figure 9. to-220ab dimension definitions a c d l7 dia l5 l6 l9 l4 f h2 g g1 l2 f2 f1 e m
package information STPSC20H065C 6/9 docid023605 rev 3 table 6. to-220ab dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 c 1.23 1.32 0.048 0.051 d 2.40 2.72 0.094 0.107 e 0.49 0.70 0.019 0.027 f 0.61 0.88 0.024 0.034 f1 1.14 1.70 0.044 0.066 f2 1.14 1.70 0.044 0.066 g 4.95 5.15 0.194 0.202 g1 2.40 2.70 0.094 0.106 h2 10 10.40 0.393 0.409 l2 16.4 typ. 0.645 typ. l4 13 14 0.511 0.551 l5 2.65 2.95 0.104 0.116 l6 15.25 15.75 0.600 0.620 l7 6.20 6.60 0.244 0.259 l9 3.50 3.93 0.137 0.154 m 2.6 typ. 0.102 typ. diam. 3.75 3.85 0.147 0.151
docid023605 rev 3 7/9 STPSC20H065C package information 9 figure 10. to-247 dimension definitions table 7. to-247 dimension values ref. dimensions millimeters inches min. typ. max. min. typ max. a 4.85 5.15 0.191 0.203 a1 2.20 2.60 0.086 0.102 b 1.00 1.40 0.039 0.055 b1 2.00 2.40 0.078 0.094 b2 3.00 3.40 0.118 0.133 c 0.40 0.80 0.015 0.031 d (1) 1. dimension d plus gate prot rusion does not exceed 20.5 mm 19.85 20.15 0.781 0.793 e 15.45 15.75 0.608 0.620 e 5.30 5.45 5.60 0.209 0.215 0.220 l 14.20 14.80 0.559 0.582 l1 3.70 4.30 0.145 0.169 l2 18.50 typ. 0.728 typ. ? p (2) 2. resin thickness around the mounting hole is not less than 0.9 mm 3.55 3.65 0.139 0.143 ? r 4.50 5.50 0.177 0.217 s 5.30 5.50 5.70 0.209 0.216 0.224 e l2 s d c a1 back view heat-sink plane l1 l b1 b2 b a e 1 1 2 2 3 3 ? r ? p
ordering information STPSC20H065C 8/9 docid023605 rev 3 3 ordering information 4 revision history table 8. ordering information order code marking package weight base qty delivery mode STPSC20H065Ct stpsc20h065 c to-220ab 1.86 g 50 tube STPSC20H065Cw STPSC20H065Cw to-247 4.43 g 30 tube table 9. document revision history date revision changes 31-aug-2012 1 first issue. 10-oct-2012 2 added max. values to table 3 . 07-nov-2013 3 updated figure 1 and figure 2 .
docid023605 rev 3 9/9 STPSC20H065C 9 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems wi th product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
