technical data sheet insert mini-coax 6 channel block straight 23C14G-40ML5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/08.13/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to rosenberger mini-coax documents pcb-layout b 501a material and plating connector parts material plating center contact cube or equiv. aurodur?, gold plate d outer contact male cube aurodur?, gold plated outer contact female brass aurodur?, gold plated body brass gold, 0.2 m min. dielectric ptfe
technical data sheet insert mini-coax 6 channel block straight 23C14G-40ML5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/08.13/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 50 w frequency dc to 40 ghz return loss 3 25 db @ dc to 3 ghz 3 20 db @ 3 ghz to 6 ghz 3 16 db @ 6 ghz to 20 ghz 3 12 db @ 20 ghz to 40 ghz insertion loss 0.04 x [ghz] f db insulation resistance 3 1g w center contact resistance 10 m w outer contact resistance 3 m w test voltage (at sea level) 750 v rms working voltage (at sea level) 500 v rms rf-leakage 3 80 db @ dc to 1 ghz 3 60 db @ 1 ghz to 4 ghz - connector only, vswr in application depends decis ive on pcb layout - mechanical data mating cycles 3 500 engagement force max. 40 n typical 30 n extraction force max. 45 n typical 30 n environmental data temperature range -40 c to +125 c climatic category iec 60068-2-1 40/85/21 dry heat iec 60068-2-2 damp heat iec 60068-2-78 shock iec 60068-2-27 (50g halfsinus, 2 shocks/axis during 11 sec.) max. soldering temperature iec 61760-1, +260 c for 10 sec. rohs compliant tooling n/a suitable cables n/a weight 2.6 g/pce draft date approved date rev. engineering change n umber name date martin moder 28/08/15 herber babinger 02/05/16 a00 16-s145 m.ruf 02/05/16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
