1/3 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.12 - rev.a double digits led numeric display lbp-602 a / k2 series lbp-602 a / k2 series are the numberical display units ? dimensions (unit : mm) featuring rohms in-house 4-element(algainp) high-brightness led dies.their luminous intensity is top class in the industry while degradation is considerably slow, which helps to keep illumination vividness almost unchanged and the image of sets high over a long period of time. ? features 1) 14.3mm for letter height, two-lines led numerical displays. 2) about 10 times more luminous intensity than the conventional products by use of 4-element led dies. (in case of orange color) 3) the same luminous intensity as the conventional products at their 1/10 of current, which contributes lots to energy-saving of sets. 4)light-leakage from segments pr obable with the small display packages is very rare. 5)both anode common type and cathode common type are available in lineup for each color. ? selection guide anodecathode emitting color common red lbp-602va2lbp-602vk2 orange lbp-602da2lbp-602dk2 yellow lbp-602ya2lbp-602yk2 green lbp-602ma 2 lbp-602mk 2 ? pin assignments d.p1 d.p2 a1 g1 digit 1 f1 b1 e1 c1 a2 g2 digit 2 f2 b2 e2 c2 d1 d2 p in no. 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 + + + + + + + + + + + + + + + + + + segment "e1"segment "d1" segment "c1" d.p1 segment "e2" segment "d2" segment "g2" segment "c2" d.p2 12 3 4 5 6 7 8 9 function pin no. segment "b2"segment "a2" segment "f2" digit 2 commo n digit 1 commo n segment "b1"segment "a1" segment "g1" segment "f1" 1011 12 13 14 15 16 17 18 function pin no. ? inner circuit (anode common) (cathode common) a 1 1 6 b115 c1 3 d1 2 e1 1 f1 18 g117 d.p1 4 a211 b210 c2 8 d2 6 e2 5 f2 12 g2 7 d.p2 9 14 dig.1 com 13 dig.2 com a116 b115 c1 3 d1 2 e1 1 f1 18 g117 d.p1 4 a211 b210 c2 8 d2 6 e2 5 f2 12 g2 7 d.p 2 9 14 dig.1 com 13 dig.2 com 12.5 25.0 0.1 19.0 0.1 14.3 1.3 8.0 1.3 8.0 0.5 (2.54) (20.32) 2 1.5 10 (15.24) 0.25 3.5min. tolerance are 0.3 unless otherwise noted : downloaded from: http:///
2/3 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.12 - rev.a data sheet lbp-602 a / k2 series ? absolute maximum ratings (ta=25 ? c) parameter unit mwmw mama v ?c?c red lbp-602va2 / vk2 896 5620 60 5 green lbp-602ma2 / mk2 896 5620 60 5 p d p d / seg i f i fp v r topr tstg 25 to + 75 30 to + 85 power dissipationpower dissipation forward current peak forward current reverse voltage operating temperature storage temperature symbol ? pulse width 1ms duty 1 / 5 ???? lbp-602da2 /dk2 896 5620 60 5 orange lb-602ya2 / yk2 896 5620 60 5 yellow ? electrical characteristics (ta=25 ? c) the products are not radiations resistant. parameter red unit v a nmnm typ. 1.9 650 20 max. 2.8 100 v f i r p ? forward voltagereverse current peak wavelength spectral line half width symbol i f = 10ma v r = 3v i f = 10ma i f = 10ma conditions typ. 1.9 605 20 max. 2.8 100 typ. 1.9 590 20 max. 2.8 100 typ. 1.9 572 20 max. 2.8 100 ?? green yellow orange ? luminous intensity p (nm) unit color red 650 type lbp-602va2 min. 14 typ. 36 mcd orange 605 lbp-602da2 56 250 mcd yellow 590 lbp-602ya2 90 450 mcd green 572 lbp-602ma2 36 100 mcd lbp-602vk2 lbp-602dk2 lbp-602yk2 LBP-602MK2 a condition of measurement is i f = 10ma. downloaded from: http:///
3/3 www.rohm.com c 2010 rohm co., ltd. all rights reserved. 2010.12 - rev.a data sheet lbp-602 a / k2 series ? electrical and optical characteristic curve fig.5 derating fig.3 relative luminous intensity - case temperature( ) fig.1 forward current - forward voltage fig.2 relative luminous intensity - forward current fig.4 ratio of maximum tolerable peak current- pulse duration 4 6 8 4 forward voltage : v f (v) forward current : i f ma) ta=25 0.01 0.1 1 10 11 01 0 0 forward current(ma) relative luminous intensity 4 6 8 4 6 4 6 8 case temperature : tc( ) relative luminous intensity i f =10ma pulse duration : tw ( s) ratio of maximum tolerance peak current to maximum tolerance dc cerrent i f peak max. i f max. 20kh z 10khz 5khz 2kh z 1khz 500hz 200hz 100hz 50khz ta=25 0 20 40 60 80 100 120 -25-15-5 5 1525354555657585 ambient temperature forward current %) downloaded from: http:///
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted w ithout the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without not ice. the content specied herein is for the purpose of introducing rohm's produ cts (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specicat ions, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other i nformation contained herein illustrate the standard usage and operations of the products. the periph eral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in t his document. however, should you incur any damage arising from any inaccuracy or mis print of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typical f unctions of and examples of application circuits for the products. rohm does not grant you, ex plicitly or implicitly, any license to use or exercise intellectual property or other ri ghts held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispu te arising from the use of such technical information. the products specied in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, ofce-automat ion equipment, commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation toler ant. while rohm always makes efforts to enhance the quality and reliability of its pr oducts, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measure s to guard against the possibility of physical injury, re or any other damage cause d in the event of the failure of any product, such as derating, redunda ncy, re control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of th e prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, d evice or system which requires an extremely high level of reliability the failure or ma lfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medic al instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsib ility in any way for use of any of the products for the above special purposes. if a product is intended to be used for an y such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or techno logy specied herein that may be controlled under the foreign exchange and the foreign trade law, you will be req uired to obtain a license or permit under the law. downloaded from: http:///
|
