emh1 / umh1n / imh1a npn 100ma 50v complex digital transistors (bias resistor built-in transistors) l outline l features 1) built-in biasing resistors, r 1 = r 2 = 22k w . 2) two dtc124e chips in one package. 3) built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit). 4) the bias resistors consist of thin-film resistors with complete isolation to allow negative biasing l inner circuit of the input. they also have the advantage of completely eliminating parasitic effects. 5) only the on/off conditions need to be set for operation, making the circuit design easy. 6) lead free/rohs compliant. l application inverter circuit, interface circuit, driver circuit l packaging specifications r 1 22k w r 2 22k w parameter tr1 and tr2 v cc 50v i c(max.) 100ma part no. package package size (mm) taping code 8,000 h1 8 tape width (mm) basic ordering unit (pcs) marking reel size (mm) emh1 emt6 1616 t2r 180 3,000 h1 imh1a 3,000 h1 umh1n umt6 2021 tr 180 8 smt6 2928 t108 180 8 emt6 umt6 smt6 emh1 (sc -107c) imh1a sot -457 (sc- 74) umh1n sot -3 6 3 (sc-8 8) out (6) (2) in (1) gnd (3) out in (5) gnd (4) out (4) (2) in (3) gnd (1) out in (5) gnd (6) emh1 / umh1n imh1a (6) (5) (4) (1) (2) (3) (4) (5) (6) (3) (2) (1) (6) (5) (4) (1) (2) (3) 1/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra emh1fha emh1fha / umh1nfha umh1nfha emh1fha umh1nfha imh1afra imh1afra imh1afra aec-q101 qualified downloaded from: http:/// dat ashee t www.rohm.com ? 2012 rohm co., ltd. all rights reserved.
www.rohm.com ? 2012 rohm co., ltd. all rights reserved. data sheet emh1 / umh1n / imh1a l absolute maximum ratings (ta = 25c) supply voltage input voltage output current collector current power dissipation junction temperature range of storage temperature l electrical characteristics (ta = 25c) *1 characteristics of built-in transistor *2 each terminal mounted on a reference footprint *3 120mw per element must not be exceeded. *4 200mw per element must not be exceeded. parameter symbol values unit v cc 50 v v in - 10 to + 40 v i o 30 ma i c(max.) *1 100 ma emh1 / umh1n p d *2 150 (total) *3 mw imh1a 300 (total) *4 mw t j 150 c t stg - 55 to + 150 c parameter symbol conditions unit min. typ. max. input voltage v i(off) v cc = 5v, i o = 100 m a - - v v i(on) v o = 0.2v, i o = 5ma 3.0 - - 0.5 v input current i i v i = 5v - - 0.36 ma output voltage v o(on) i o / i i = 10ma / 0.5ma - 0.1 0.3 m a dc current gain g i v o = 5v, i o = 5ma 56 - - - output current i o(off) v cc = 50v, v i = 0v - - 0.5 k w resistance ratio r 2 /r 1 - 0.8 1 1.2 - input resistance r 1 - 15.4 22 28.6 mhz transition frequency f t *1 v ce = 10v, i e = - 5ma, f = 100mhz - 250 - 2/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra emh1fha / umh1nfha imh1afra downloaded from: http:///
www.rohm.com ? 2012 rohm co., ltd. all rights reserved. data sheet emh1 / umh1n / imh1a l electrical characteristic curves (ta = 25c) fig.1 input voltage vs. output current (on characteristics) input voltage : v i(on) [v] output current : i o [a] fig.2 output current vs. input voltage (off characteristics) output current : i o [a] input voltage : v i(off) [v] fig.3 output current vs. output voltage output current : i o [ma] output voltage : v o [v] fig.4 dc current gain vs. output current dc current gain : g i output current : i o [a] 0 10 20 30 0 5 10 0a 70a 80a 100a 110a 120a 130a 90a i i = ta=25oc 60a 50a 140a 150a 3/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra downloaded from: http:///
www.rohm.com ? 2012 rohm co., ltd. all rights reserved. data sheet emh1 / umh1n / imh1a l electrical characteristic curves (ta = 25c) fig.5 output voltage vs. output current output voltage : v o(on) [v] output current : i o [a] 4/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra downloaded from: http:///
www.rohm.com ? 2012 rohm co., ltd. all rights reserved. data sheet emh1 / umh1n / imh1a l dimensions (unit : mm) dimension in mm/inches emt6 patterm of terminal position areas ? >e ? >?? >?? >? >? >? >? >? ?$ >?> > ? >>y > ?% >? >? ?>y ?>t ?>y ? >>?> >>? >>?> >>? >>y >>>> >>>y> > >>>>> > >>>> >>>> >>>>y>? >>>>t>t ? >>>y>? >>>t>? >>>>>? >>>>y>y ? >>>>? >>>y>? >>>>>? >>>>>? >e >y>>> >y>>?> >>>>>? >>>>a>? >? >y>>y> >y>>?> >>>>>? >>>>>y ? >? >? >y>>> >y>>?> >>>>>? >>>>a>? >? >>>y> >>>?> >>>>> >>>>y>t >?? > >>>?> > >>>>y> ?$ > >>>y> > >>>>> ?% > >>>y> > >>>>> >>?> >>? >>?> >>? ?>y ?>t > >>>?>? > >>>>y> ?>y > >>>> > >>>>y>? >?>>?>?>?>? >>>> >>>>t >e>?> >>?>?>?>>?? >?>t>? >>?>?>?>>?? >?>t>? >?>>?>?>?>? >y>>t> >>>>>? >e>?> 5/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra downloaded from: http:///
www.rohm.com ? 2012 rohm co., ltd. all rights reserved. data sheet emh1 / umh1n / imh1a l dimensions (unit : mm) dimension in mm/inches umt6 patterm of terminal position areas >? ?$ >? > > >? >? ? >e ? ? >y >>? >?>y >?? ?% >? >>y ?>y ?>t ?>y ? > >? >>?> >>? >>?> >>? > >>>?> >y>>> > >>>>?>? >>y >>>> >>>y> > >>>>> >>? ? >>>y> >>>?> >>>>>a >>>>y>t ? >>>y> >>>t> >>>>> >>>>>? >e >y>>?> >t>>y> >>>>?> >>>>?>? >? >y>>y> >y>>?> >>>>> >>>>>? ? >? >? >t>>> >t>>t> >>>>?>? >>>>?>? >?>y >>>t> >>>> >>>>>? >>>>t >?? >>>t> >>>> >>>>y >>>>t>t >y >>>y> >>>?> >>>>> >>>>y>t ?$ > >>>y> > >>>>> ?% > >>>y> > >>>>> >>?> >>? >>?> >>? ?>y ?>t > >>>> > >>>>y>a ?>y > >>>a> > >>>>t>a >>>t> >>>>y >e>?> >>?>?>?>>?? >?>t>? >?>>?>?>?>? >y>>> >>>>a >e>?> >>?>?>?>>?? >?>t>? >?>>?>?>?>? >>>a> >>>>? 6/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra downloaded from: http:///
www.rohm.com ? 2012 rohm co., ltd. all rights reserved. data sheet emh1 / umh1n / imh1a l dimensions (unit : mm) dimension in mm/inches smt6 patterm of terminal position areas >? ? >e >? >? ? ?$ >? > > ? >y >>? >?>y >?? >>y > >? ?% >? ?>y ? ?>y ?>t >>?> >>? >>?> >>? > >y>>> >y>>?> >>>>?>? >>>>>y >>y >>>> >>>y> > >>>>> >>? ? >>>t> >>>> >>>>y >>>>y>a ? >>>>? >>>t> >>>>> >>>>y >e >t>>?> >?>>> >>>y>y >>>y>y>? >? >y>>> >y>>?> >>>>>? >>>>?>y ? >? >? >t>>a> >?>>> >>>y>>t >>>y>y>? >?>y >>>?> >>>a> >>>>y>t >>>>t> >?? >>>> >>>?> >>>>y>a >>>>t>? >y >>>t> >>>?> >>>>>? >>>>y>t ?$ > >>>t> > >>>>>? ?% > >>>y> > >>>>> >>?> >>? >>?> >>? ?>y ?>t >>>a> > >>>>t> ?>y > >>>?> > >>>>?> >>>t> >>>>y >e>?> >>?>?>?>>?? >?>t>? >?>>?>?>?>? >t>>y> >>>>? >e>?> >>?>?>?>>?? >?>t>? >?>>?>?>?>? >>>?> >>>> 7/7 2012.06 - rev.b emh1fha / umh1nfha / imh1afra downloaded from: http:///
datasheet d a t a s h e e t notice-paa-e rev.001 ? 2015 rohm co., ltd. all rights reserved. notice precaution on using rohm products 1. if you intend to use our products in devices requiring extremely high reliability (such as medical equipment (note 1) , aircraft/spacecraft, nuclear power controllers, etc.) and whos e malfunction or failure may cause loss of human life, bodily injury or serious damage to property (specific applications), please consult with the rohm sales representative in advance. unless otherwise agreed in writ ing by rohm in advance, rohm shall not be in any way responsible or liable for any damages, expenses or losses in curred by you or third parties arising from the use of any rohms products for specific applications. (note1) medical equipment classification of the specific applications japan usa eu china class class class b class class ? class 2. rohm designs and manufactures its products subject to strict quality control system. however, semiconductor products can fail or malfunction at a certain rate. please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe desi gn against the physical injury, damage to any property, which a failure or malfunction of our products may cause. the following are examples of safety measures: [a] installation of protection circuits or other protective devices to improve system safety [b] installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. our products are not designed under any special or extr aordinary environments or conditi ons, as exemplified below. accordingly, rohm shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any rohms products under an y special or extraordinary environments or conditions. if you intend to use our products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] use of our products in any types of liquid, incl uding water, oils, chemicals, and organic solvents [b] use of our products outdoors or in places where the products are exposed to direct sunlight or dust [c] use of our products in places where the products ar e exposed to sea wind or corrosive gases, including cl 2 , h 2 s, nh 3 , so 2 , and no 2 [d] use of our products in places where the products are exposed to static electricity or electromagnetic waves [e] use of our products in proximity to heat-producing components, plastic cords, or other flammable items [f] sealing or coating our products with resin or other coating materials [g] use of our products without cleaning residue of flux (ev en if you use no-clean type fluxes, cleaning residue of flux is recommended); or washing our products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] use of the products in places subject to dew condensation 4. the products are not subjec t to radiation-proof design. 5. please verify and confirm characteristics of the final or mounted products in using the products. 6. in particular, if a transient load (a large amount of load applied in a short per iod of time, such as pulse. is applied, confirmation of performance characteristics after on-boar d mounting is strongly recomm ended. avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading c ondition may negatively affect product performance and reliability. 7. de-rate power dissipation (pd) depending on ambient temper ature (ta). when used in seal ed area, confirm the actual ambient temperature. 8. confirm that operation temperat ure is within the specified range described in the product specification. 9. rohm shall not be in any way responsible or liable for fa ilure induced under deviant condi tion from what is defined in this document. precaution for mounting / circuit board design 1. when a highly active halogenous (chlori ne, bromine, etc.) flux is used, the resi due of flux may negatively affect product performance and reliability. 2. in principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. if the flow sol dering method is preferred on a surface-mount products, please consult with the rohm representative in advance. for details, please refer to rohm mounting specification downloaded from: http:///
datasheet d a t a s h e e t notice-paa-e rev.001 ? 2015 rohm co., ltd. all rights reserved. precautions regarding application examples and external circuits 1. if change is made to the constant of an external circuit, pl ease allow a sufficient margin considering variations of the characteristics of the products and external components, including transient characteri stics, as well as static characteristics. 2. you agree that application notes, re ference designs, and associated data and in formation contained in this document are presented only as guidance for products use. theref ore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. rohm shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. precaution for electrostatic this product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. please take proper caution in your manufacturing process and storage so that voltage exceeding t he products maximum rating will not be applied to products. please take special care under dry condit ion (e.g. grounding of human body / equipment / solder iron, isolation from charged objects, se tting of ionizer, friction prevention and temperature / humidity control). precaution for storage / transportation 1. product performance and soldered connections may deteriora te if the products are stor ed in the places where: [a] the products are exposed to sea winds or corros ive gases, including cl2, h2s, nh3, so2, and no2 [b] the temperature or humidity exceeds those recommended by rohm [c] the products are exposed to di rect sunshine or condensation [d] the products are exposed to high electrostatic 2. even under rohm recommended storage c ondition, solderability of products out of recommended storage time period may be degraded. it is strongly recommended to confirm sol derability before using products of which storage time is exceeding the recommended storage time period. 3. store / transport cartons in the co rrect direction, which is indicated on a carton with a symbol. otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. use products within the specified time after opening a humidity barrier bag. baking is required before using products of which storage time is exceeding the recommended storage time period. precaution for product label qr code printed on rohm products label is for rohms internal use only. precaution for disposition when disposing products please dispose them proper ly using an authorized industry waste company. precaution for foreign exchange and foreign trade act since concerned goods might be fallen under listed items of export control prescribed by foreign exchange and foreign trade act, please consult with rohm in case of export. precaution regarding intellectual property rights 1. all information and data including but not limited to application example contained in this document is for reference only. rohm does not warrant that foregoi ng information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. rohm shall not have any obligations where the claims, actions or demands arising from the co mbination of the products with other articles such as components, circuits, systems or external equipment (including software). 3. no license, expressly or implied, is granted hereby under any intellectual property rights or other rights of rohm or any third parties with respect to the products or the informati on contained in this document. pr ovided, however, that rohm will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the produc ts, subject to the terms and conditions herein. other precaution 1. this document may not be reprinted or reproduced, in whol e or in part, without prior written consent of rohm. 2. the products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of rohm. 3. in no event shall you use in any wa y whatsoever the products and the related technical information contained in the products or this document for any military purposes, incl uding but not limited to, the development of mass-destruction weapons. 4. the proper names of companies or products described in this document are trademarks or registered trademarks of rohm, its affiliated companies or third parties. downloaded from: http:///
datasheet datasheet notice C we rev.001 ? 201 5 rohm co., ltd. all rights reserved. general precaution 1. before you use our pro ducts, you are requested to care fully read this document and fully understand its contents. rohm shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny rohms products against warning, caution or note contained in this document. 2. all information contained in this docume nt is current as of the issuing date and subj ec t to change without any prior notice. before purchasing or using rohms products, please confirm the la test information with a rohm sale s representative. 3. the information contained in this doc ument is provi ded on an as is basis and rohm does not warrant that all information contained in this document is accurate an d/or error-free. rohm shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. downloaded from: http:///
|
