bss169 sipmos ? small-signal-transistor features ? n-channel ? depletion mode ? d v /d t rated ? available with v gs(th) indicator on reel ? pb-free lead-plating; rohs compliant ? halogen-free according to aec61249-2-21 ? qualified according to aec q101 v ds 100 v r ds(on),max 12 i dss,min 0.09 a product summary pg-sot-23 type package pb-free tape and reel information marking bss169 pg-sot-23 yes h6327: 3000 pcs/reel sfs bss169 pg-sot-23 yes h6906: 3000 pcs/reel sorted in v gs(th) bands 1) sfs rev. 1.8 page 1 ######## maximum ratings, at t j =25 c, unless otherwise specified parameter symbol conditions unit continuous drain current i d t a =25 c 0.17 a t a =70 c 0.14 pulsed drain current i d,pulse t a =25 c 0.68 reverse diode d v /d t d v /d t i d =0.17 a, v ds =80 v, d i /d t =200 a/s, t j,max =150 c 6 kv/s gate source voltage v gs 20 v esd class jesd22-a114-hbm class 0 power dissipation p tot t a =25 c 0.36 w operating and storage temperature t j , t stg -55 ... 150 c iec climatic category; din iec 68-1 55/150/56 1) see table on next page and diagram 11 value bss169 pg-sot-23 yes h6327: 3000 pcs/reel sfs bss169 pg-sot-23 yes h6906: 3000 pcs/reel sorted in v gs(th) bands ??? 1) sfs rev. 1.8 page 1 ########
bss169 parameter symbol conditions unit min. typ. max. thermal characteristics thermal resistance, junction - ambient r thja minimal footprint - - 350 k/w electrical characteristics, at t j =25 c, unless otherwise specified static characteristics drain-source breakdown voltage v (br)dss v gs =-10 v, i d =250 a 100 - - v gate threshold voltage v gs(th) v ds =3 v, i d =50 a -2.9 -2.2 -1.8 drain-source cutoff current i d(off) v ds =100 v, v gs =-10 v, t j =25 c - - 0.1 a v ds =100 v, v gs =-10 v, t j =125 c --10 values rev. 1.8 page 2 ######## gate-source leakage current i gss v gs =20 v, v ds =0 v - - 10 na on-state drain current i dss v gs =0 v, v ds =10 v 90 - - ma drain-source on-state resistance r ds(on) v gs =0 v, i d =0.05 a - 5.3 12 : v gs =10 v, i d =0.17 a - 2.9 6 transconductance g fs | v ds |>2| i d | r ds(on)max , i d =0.14 a 0.10 0.19 - s threshold voltage v gs(th) sorted in bands 2) j v gs(th) v ds =3 v, i d =50 a -2 - -1.8 v k -2.15 - -1.95 l -2.3 - -2.1 m -2.45 - -2.25 n -2.6 - -2.4 2) each reel contains transistors out of one band whose identifying letter is printed on the reel label. a specific band cannot be ordered separately. rev. 1.8 page 2 ########
bss169 parameter symbol conditions unit min. typ. max. d y namic characteristics input capacitance c iss -5168pf output capacitance c oss -913 reverse transfer capacitance c rss -47 turn-on delay time t d(on) - 2.9 4.2 ns rise time t r - 2.7 4.0 turn-off delay time t d(off) -1117 fall time t f -2740 gate charge characteristics gate to source charge q gs - 0.12 0.16 nc gate to drain charge q gd - 0.9 1.4 gate charge total q g - 2.1 2.8 gate plateau voltage v plateau - -0.43 - v values v gs =-10 v, v ds =25 v, f =1 mhz v dd =50 v, v gs =-3?7 v, i d =0.12 a, r g =6 : v dd =80 v, i d =0.12 a, v gs =-3 to 7 v rev. 1.8 page 3 ######## reverse diode diode continous forward current i s - - 0.17 a diode pulse current i s,pulse - - 0.68 diode forward voltage v sd v gs =-10 v, i f =0.17 a, t j =25 c - 0.79 1.2 v reverse recovery time t rr - 20.5 25.6 ns reverse recovery charge q rr - 9.7 12.1 nc v r =50 v, i f =0.12 a, d i f /d t =100 a/s t a =25 c rev. 1.8 page 3 ########
bss169 1 power dissipation 2 drain current p tot =f( t a ) i d =f( t a ); v gs p tot [w] t a [c] 0 0.04 0.08 0.12 0.16 0.2 0 40 80 120 160 i d [a] t a [c] rev. 1.8 page 4 ######## 3 safe operating area 4 max. transient thermal impedance i d =f( v ds ); t a =25 c; d =0 z thja =f( t p ) parameter: t p parameter: d = t p / t 10 s 100 s 1 ms 10 ms dc 10 0 10 1 10 2 10 3 10 -3 10 -2 10 -1 10 0 10 1 i d [a] v ds [v] limited by on-state resistance single pulse 0.01 0.02 0.05 0.1 0.2 0.5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 0 10 1 10 2 10 3 z thja [k/w] t p [s] 0 0.1 0.2 0.3 0.4 0 40 80 120 160 p tot [w] t a [c] 0 0.04 0.08 0.12 0.16 0.2 0 40 80 120 160 i d [a] t a [c] rev. 1.8 page 4 ########
bss169 5 typ. output characteristics 6 typ. drain-source on resistance i d =f( v ds ); t j =25 c r ds(on) =f( i d ); t j =25 c parameter: v gs parameter: v gs -0.2 v -0.1 v 0 v 0.1 v 0.2 v 0.5 v 1 v 10 v 0 2 4 6 8 10 12 14 0 0.1 0.2 0.3 0.4 0.5 r ds(on) [ : ] i d [a] -0.2 v -0.1 v 0 v 0.1 v 0.2 v 0.5 v 1 v 10 v 0 0.1 0.2 0.3 0.4 0.5 0246810 i d [a] v ds [v] rev. 1.8 page 5 ######## 7 typ. transfer characteristics 8 typ. forward transconductance i d =f( v gs ); | v ds |>2| i d | r ds(on)max g fs =f( i d ); t j =25 c -0.2 v -0.1 v 0 v 0.1 v 0.2 v 0.5 v 1 v 10 v 0 2 4 6 8 10 12 14 0 0.1 0.2 0.3 0.4 0.5 r ds(on) [ : ] i d [a] 0 0.1 0.2 0.3 0.4 0.5 -2 -1 0 1 2 i d [a] v gs [v] 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.00 0.10 0.20 0.30 0.40 0.50 g fs [s] i d [a] -0.2 v -0.1 v 0 v 0.1 v 0.2 v 0.5 v 1 v 10 v 0 0.1 0.2 0.3 0.4 0.5 0246810 i d [a] v ds [v] rev. 1.8 page 5 ########
bss169 9 drain-source on-state resistance 10 typ. gate threshold voltage r ds(on) =f( t j ); i d =0.05 a; v gs =0 v v gs(th) =f( t j ); v ds =3 v; i d =50 a parameter: i d typ 98 % 0 4 8 12 16 20 24 -60 -20 20 60 100 140 180 r ds(on) [ : ] t j [c] typ 98 % 2 % -3.5 -3.1 -2.7 -2.3 -1.9 -1.5 -1.1 -60 -20 20 60 100 140 180 v gs(th) [v] t j [c] rev. 1.8 page 6 ######## 11 threshold voltage bands 12 typ. capacitances i d =f( v gs ); v ds =3 v; t j =25 c c =f( v ds ); v gs =-10 v; f =1 mhz 50 a j k l m n 0.01 0.1 1 10 -3 -2.5 -2 -1.5 -1 i d [ma] v gs [v] typ 98 % 0 4 8 12 16 20 24 -60 -20 20 60 100 140 180 r ds(on) [ : ] t j [c] typ 98 % 2 % -3.5 -3.1 -2.7 -2.3 -1.9 -1.5 -1.1 -60 -20 20 60 100 140 180 v gs(th) [v] t j [c] ciss coss crss 10 0 10 1 10 2 10 3 0102030 c [pf] v ds [v] rev. 1.8 page 6 ########
bss169 13 forward characteristics of reverse diode 15 typ. gate charge i f =f( v sd ) v gs =f( q gate ); i d =0.12 a pulsed parameter: t j parameter: v dd 0.2 vds(max) 0.5 vds(max) 0.8 vds(max) -4 -2 0 2 4 6 8 00.511.522.5 v gs [v] q gate [nc] 25 c 150 c 25 c, 98% 150 c, 98% 10 -4 10 -3 10 -2 10 -1 10 0 00.511.5 i f [a] v sd [v] rev. 1.8 page 7 ######## 16 drain-source breakdown voltage v br(dss) =f( t j ); i d =250 a 80 100 120 -60 -20 20 60 100 140 180 v br(dss) [v] t j [c] 0.2 vds(max) 0.5 vds(max) 0.8 vds(max) -4 -2 0 2 4 6 8 00.511.522.5 v gs [v] q gate [nc] 25 c 150 c 25 c, 98% 150 c, 98% 10 -4 10 -3 10 -2 10 -1 10 0 00.511.5 i f [a] v sd [v] rev. 1.8 page 7 ########
bss169 packa g e outline: footprint: packaging: rev. 1.8 page 8 ######## dimensions in mm rev. 1.8 page 8 ########
bss169 published by infineon technologies ag 81726 munich, germany ? 2010 infineon technologies ag all rights reserved. legal disclaimer the information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office (www.infineon.com). warnings due to technical requirements, components may contain dangerous substances. for information on the types in question, please contact the nearest infineon technologies office. infineon technologies components may be used in life-support devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered. rev. 1.8 page 9 ######## published by infineon technologies ag 81726 munich, germany ? 2010 infineon technologies ag all rights reserved. legal disclaimer the information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office (www.infineon.com). warnings due to technical requirements, components may contain dangerous substances. for information on the types in question, please contact the nearest infineon technologies office. infineon technologies components may be used in life-support devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered. rev. 1.8 page 9 ########
|
