CFPT-9005 tcxo specification issue 13; april 2016 outline (mm) -1 a = no ref voltage, ageing adj option test circuit description sub 1 ppm performance tcxo , a single chip oscillator and analogue compensation circuit operating over an extended temperature range. its ability to function down to a supply voltage of 2.4v and low power consumption make it particularly suitable for mobile applications. -1 a no ref voltage, ageing adj option -1b no ref voltage, no freq adj option -2 a ref voltage = 2.2v, ageing adj option -3 a ref voltage = 2.7v, ageing adj option -4 a ref voltage = 4.7v, ageing adj option frequency parameters frequency 10.0mhz to 40.0mhz frequency stability 0.30ppm to 2.50ppm 2ppm max in 1st year (see note 2) ageing electrical parameters 5.0v 10% supply voltage supply current: 1+frequency(mhz) *1.2*{load(pf)+30}*10C3ma supply voltages in the range 2.4v to 6.0v available to order, please contact our sales o ffices optional reference voltage output on pad 1, suitable for potentiometer supply or dac reference: 1. no output (standard option) 2. 2.2v, for min. vs>2.4v 3. 2.7v, for min. vs>3.0v 4. 4.2v, for min. vs>4.5v maximum load current (ma) = vref /10 for manual frequency adjustment connect an external 50k? potentiometer between pad 1 ( reference voltage ) and pad 4 (gnd) with wiper connected to pad 10 ( voltage control ). please specify reference voltage as part of the ordering code. printed on 26 apr 16 11 :58 using model data sheet v1.2550 page 1 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
CFPT-9005 tcxo specification frequency adjustment pulling 10ppm min (see note 1) three options with external voltage control applied to pad 10: a. ageing adjustment : >5ppm, frequency <20mhz >7ppm, frequency >20mhz b. no frequency adjustment initial calibration @ 25c < 1.0ppm c. high pulling 10ppm to 50ppm can be available depending on frequency and stability options (please contact our sales o ffices ) linearity: <1% slope: positive input resistance: >100k? modulation bandwidth: >2khz voltage control range : without reference voltage: 2.5v1v with reference voltage: vc = 0 v to vref ageing: 1ppm maximum in 1st year, frequency <20mhz 3ppm maximum for 10 years (including the 1st year), frequency <20mhz 2ppm maximum in 1st year, frequency 20mhz 5ppm maximum for 10 years (including the 1st year), frequency 20mhz after reflow: 1ppm max operating temperature ranges 0 to 50c -20 to 70c 0 to 70c -30 to 75c -40 to 85c output details output compatability clipped sine load: 10k? // 10p f, ac-coupled output control tri -state operation: logic 1 (>60% vs) to pad 8 enables output logic 0 (<20% vs) to pad 8 disables output when at logic 0 the output stage is disabled for all output options, but the oscillator and compensation circuit are still active (current consumption <1ma) output levels vpk-pk > 0.8v noise parameters phase noise typical (@ 13.0mhz): o ffset dbc /hz 10hz -95 100hz -120 1khz -135 10khz -140 100khz -145 printed on 26 apr 16 11 :58 using model data sheet v1.2550 page 2 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
CFPT-9005 tcxo specification environmental parameters storage temperature range: C55 to 125c shock: iec 60068-2-27, test ea : 1500g acceleration for 6ms, 3 shocks in each of 3 mutually perpendicular planes vibration : iec 60068-2-6, test fc , procedure b4: 10hz-60hz, 1.5mm displacement, 60-2000hz at 98.1m/s2, 30mins in 3 mutually perpendicular planes at 1 oct/min solderability: mil-std-202, method 208, category 3 ordering information frequency* model* reference voltage + frequency adjustment options * output frequency stability (over operating temperature range)* operating temperature range * supply voltage (*minimum required) example 10.0mhz CFPT-9005-1a clipped sine 1.0ppm -20 to 70c 5.0v note: certain frequency stability / temperature range combinations may not be available for all frequencies. compliance compliant rohs status ( 20 11 /65/eu) compliant reach status ms l rating (jdec-std-033): 1 packaging details tape & reel in accordance with eia-481-d pack style: reel pack size: 1,000 loose in bulk pack pack style: bulk pack size: 10 electrical specification - maximum limiting values 5.0v 10% frequency min frequency max temperature range stability (min) current draw rise and fall time duty cycle c ppm ma ns % 0 to 70 10.0mhz 40.0mhz 0.3 - - - -20 to 70 0.5 - - - -30 to 75 1.0 - - - -40 to 85 1.0 - - - this document was correct at the time of printing; please contact your local sales office for the latest version. click to view latest version on our website. printed on 26 apr 16 11 :58 using model data sheet v1.2550 page 3 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
|