l-29 www.recom-international.com rev: 2 /2013 racd20/277 lightline ac/dc-converter with 5 year warranty 20 watt pfc single output selection guide input voltage range 90-305vac or 130-430vdc output power range other types 10 watts min., 20 watts max. 1050ma version 12 watts min., 20 watts max. input frequency range 50/60 hz typ. power factor full load, 115vac >0.90 full load, 230vac >0.90 full load, 277vac >0.85 thd full load, 115vac/230vac/277vac 14% max. open circuit voltage 350ma version 59 vdc 500ma version 44 vdc 700ma version 33 vdc 1050ma version 23 vdc no load power consumption 2 watts max. input / output isolation 3750 vac / 1 minute operating frequency 50/60 hz overload protection 105% ~ 110% weight 195g dimension drawing 80 x 74 x 26.5mm thd <20% temperature coefficient according to standards operating temperature -20c to +50c storage temperature -40c to +80c max. case temperature (tc) 90c acoustic noise 30db (10cm) ip rating ip66 certifications enec ce certification, general safety en61347-2-13 led lighting safety (e340696) ul1310 class b, ul8750 rcm (21378) as/nzs 61347.1:2002, iec 61347-2-13 harmonics en61000-3-2 class c emc en55015 class b fcc part 18 class b design lifetime 50 x 103 hours specifications 20w class ii ac-dc led power supply 350ma, 500ma, 700ma, 1050ma output universal ac input (90-305vac) active power factor correction isolation voltage 3.75kvac efficiency to 80% enec, ul, rcm and cb certified low cost features led driver part input output output efficiency number range current voltage (vac) (ma) (vdc) (typ.) racd20-350/277 90 - 305 350 28 - 57 80% racd20-500/277 90 - 305 500 20 - 40 80% racd20-700/277 90 - 305 700 14 - 29 80% RACD20-1050/277 90 - 305 1050 10.8 - 19 80% ul 8750 certified enec 61347 certified @ .@ -@ ,@ @ @ 0 ; ; ; ,; -; 5@ #; : ) +; derating-graph (ambient temperature) e340696 rohs 2011/65/eu 6/6
l-30 www.recom-electronic.com rev: 2 /2013 racd20/277 standard package style & pinning racd20/277 series lightline ac/dc-converter -%+ - % -.%- /,% .% *%- ,b+ b* +b+ /b . * #( wire connections wire function brown vac in (l) blue vac in (n) red led+ black led- tolerance xx = +1mm/ -0.5mm xx.x = +/- 0.25mm standard application circuit 7) 0&&&6 // +2) *2) //2) notes: led power supply is internally fused. no external fuse is required. ? do not connect or disconnect led load while the converter is on. this may da- ? mage the led or reduce its life. class 2 power supply ? 9 % a !
|