n1313 tkim tc-00002831/d1099ts (koto) ta-1949 no.5810-1/4 http://onsemi.com semiconductor components industries, llc, 2013 november, 2013 cph6102 bipolar transisitor ? 50v, ? 1a, low v ce ( sat ) pnp single cph6 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? dc-dc converter, relay drivers, lamp drivers, motor drivers, strobes features ? adoption of fbet, mbit processes ? large current capacity ? low collector to emitter saturation voltage ? high-speed switching ? ultrasmall package permitting applied sets to be made small and slim (0.9mm) ? high allowable power dissipation speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector to base voltage v cbo --60 v collector to emitter voltage v ceo --50 v emitter to base voltage v ebo -- 5 v collector current i c --1.0 a collector current (pulse) i cp -- 2 a collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 1.3 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7018a-002 ordering number : EN5810a product & package information ? package : cph6 ? jeita, jedec : sc-74, sot-26, sot-457 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection 1, 2, 5, 6 4 3 tl 1 : collecto r 2 : collecto r 3 : base 4 : emitter 5 : collecto r 6 : collecto r cph6 3 2 1 64 5 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 0.95 cph6102-tl-e ab lot no.
cph6102 no.5810-2/4 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = --50v, i e =0a --100 na emitter cutoff current i ebo v eb = --4v, i c =0a --100 na dc current gain h fe 1v ce = --2v, i c = --100ma 200 560 h fe 2v ce = --2v, i c = --1a 30 gain-bandwidth product f t v ce = --10v, i c = --50ma 150 mhz output capacitance cob v cb = --10v, f=1mhz 12 pf collector to emitter saturation voltage v ce (sat) i c = --500ma, i b = --50ma --180 --500 mv base to emitter saturation voltage v be (sat) i c = --500ma, i b = --50ma --0.9 --1.2 v collector to base breakdown voltage v (br)cbo i c = --10 a, i e =0a --60 v collector to emitter breakdown voltage v (br)ceo i c = --1ma, r be = --50 v emitter to base breakdown voltage v (br)ebo i e = --10 a, i c =0a --5 v turn-on time t on see speci ed test circuit. 40 ns storage time t stg 300 ns fall time t f 30 ns switching time test circuit ordering information device package shipping memo cph6102-tl-e cph6 3,000pcs./reel pb free r l r b v r v cc = --25v v be =5v i c =10i b 1= --10i b 2= --500ma + + 50 input output 100 f 470 f pw=20 s i b1 d.c. 1% i b2 i c -- v ce collector to emitter voltage, v ce -- v collector current, i c -- a i c -- v be collector current, i c -- ma base to emitter voltage, v be -- v 0 --0.2 --0.4 --0.6 --0.8 --1.0 0 --2 --3 -- 1 -- 4 -- 5 --2ma --8ma --6ma --4ma -- 1 0ma --12ma --1ma it16938 0 --200 --400 --600 --800 --1000 --1200 v ce = --2v it16939 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 25 c -- 25 c ta=75 c i b =0ma
cph6102 no.5810-3/4 h fe -- i c collector current, i c -- ma dc current gain, h fe f t -- i c collector current, i c -- ma gain-bandwidth product, f t -- mhz cob -- v cb collector to base voltage, v cb -- v output capacitance, cob -- pf v ce (sat) -- i c collector current, i c -- ma collector to emitter saturation voltage, v ce (sat) -- mv v be (sat) -- i c collector current, i c -- ma base to emitter saturation voltage, v be (sat) -- mv a s o collector to emitter voltage, v ce -- v collector current, i c -- a collector dissipation, p c -- w p c -- ta ambient temperature, ta -- c 3 0 5 7 --1.0 7 5 3 2 --10 5 7 --10 2 3 5 7 --100 2 2 3 5 7 --1000 ta= --25 c 75 c 25 c it16940 it16941 57 --10 23 57 --100 23 5 it16942 57 --10 23 57 --100 23 7 --1000 23 5 i c / i b =10 it16944 it16945 it16946 it16943 5 7 2 3 10 5 7 100 2 3 5 7 1000 ta=75 c 25 c -- 2 5 c v ce = --2v 2 3 10 5 7 100 2 3 5 v ce = --10v 3 2 5 7 10 2 3 5 5357 --10 7 --1.0 2357 --100 2 f=1mhz --1000 7 5 3 2 7 5 3 2 --100 --10 57 --10 23 57 2 2 357 --1000 --100 ta=75 c --25 c 25 c i c / i b =10 0 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 20 40 60 80 100 120 140 160 3 2 5 7 --0.1 3 2 3 2 5 7 --1.0 23 57 --1.0 23 57 23 57 --10 1ms 10ms 100ms dc op e ration. i cp = --2a i c = --1a 100 s 10 s ta=25 c single pulse when mounted on ceramic substrate (600mm 2 0.8mm) when mounted on ceramic substrate (600mm 2 0.8mm)
cph6102 ps no.5810-4/4 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner. outline drawing land pattern example cph6102-tl-e mass (g) unit 0.015 * for reference mm unit: mm 0.6 2.4 1.4 0.95 0.95
|
