 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| january 2016 docid028830 rev 1 1 / 12 this is information on a p roduct in full production. www.st.com STU7LN80K5 n - channel 800 v, 0.95 typ., 5 a mdmesh? k5 power mosfet in a ipak package datasheet - production data figure 1 : internal schematic diagram features order code v ds r ds(on) max. i d STU7LN80K5 800 v 1.15 5 a ? industry?s lowest r ds(on) x area ? industry?s best figure of merit (fom) ? ultra - low gate charge ? 100% avalanche tested ? zener - protected applications ? switching applications description this very high voltage n - channel power mosfet is designed using mdmesh? k5 technology based on an innovative proprietary vertical structure. the result is a dramatic r eduction in on - resistance and ultra - low gate charge for applications requiring superior power density and high efficiency. table 1: devi ce summary order code marking package packing STU7LN80K5 7ln80k5 ipak tube 3 2 1 tab ipak
contents STU7LN80K5 2 / 12 docid028830 rev 1 contents 1 electrical ratings ............................................................................. 3 2 electrical characteristics ................................................................ 4 2.1 electrical characteristics (curves) ...................................................... 6 3 test circuits ..................................................................................... 8 4 package information ....................................................................... 9 4.1 ipak type c package information ..................................................... 9 5 revision history ............................................................................ 11 STU7LN80K5 electrical ratings docid028830 rev 1 3 / 12 1 electrical ratings table 2: absolute maximum ratings symbol parameter value unit v gs gate - source voltage 30 v i d drain current (continuous) at t c = 25 c 5 a i d drain current (continuous) at t c = 100 c 3.4 a i d (1) drain current (pulsed) 20 a p tot total dissipation at t c = 25 c 85 w dv/dt (2) peak diode recovery voltage slope 4.5 v/ns dv/dt (3) mosfet dv/dt ruggedness 50 v/ns t stg storage temperature - 55 to 150 c t j operating junction temperature notes: (1) pulse width limited by safe operating area. (2) i sd 5 a, di/dt 100 a/s; v ds peak v (br)dss , v dd = 400 v (3) v ds 640 v table 3: thermal data symbol parameter value unit r thj - case thermal resistance junction - case 1.47 c/w r thj - amb thermal resistance junction - ambient 100 c/w table 4: avalanche characteristics symbol parameter value unit i ar avalanche current, repetetive or not repetetive (pulse width limited by t jmax ) 1.5 a e as (single pulse avalanche energy (starting t j = 25 c, i d = i ar ; v dd = 50 v) 200 mj electrical characteristics STU7LN80K5 4 / 12 docid028830 rev 1 2 electrical characteristics t c = 25 c unless otherwise specified table 5: on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain - source breakdown voltage v gs = 0 v, i d = 1 ma 800 v i dss zero gate voltage drain current v gs = 0 v, v ds = 800 v 1 a v gs = 0 v, v ds = 800 v, t c = 125 c 50 a i gss gate - body leakage current v ds = 0 v, v gs = 20 v 10 a v gs(th) gate threshold voltage v ds = v gs , i d =100 a 3 4 5 v r ds(on) static drain - source on- resistance v gs = 10 v, i d = 2.5 a 0.95 1.15 table 6: dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 100 v, f = 1 mhz, v gs = 0 v - 270 - pf c oss output capacitance - 22 - pf c rss reverse transfer capacitance - 0.5 - pf c o(er) (1) equivalent capacitance energy related v ds = 0 to 640 v, v gs = 0 v - 17 - nc c o(tr) (2) equivalent capacitance time related - 48 - nc r g intrinsic gate resistance f = 1 mhz, open drain - 7.5 - q g total gate charge v dd = 640 v, i d = 5 a, v gs = 10 v (see figure 15: "test circuit for gate charge behavior" ) - 12 - nc q gs gate - source charge - 2.6 - nc q gd gate - drain charge - 8.6 - nc notes: (1) energy related is defined as a constant equivalent capacitance giving the same stored energy as c oss when v ds increases from 0 to 80% v dss (2) time related is defined as a constant equivalent capacitance giving the same stored energy as c oss when v ds increases from 0 to 80% v dss table 7: switching times symbol parameter test conditions min. typ. max. unit t d(on) turn - on delay time v dd = 400 v, i d = 2.5 a, r g = 4.7 , v gs = 10 v (see figure 14: "test circuit for resistive load switching times" and figure 19: "switching time waveform" ) - 9.3 - ns t r rise time - 6.7 - ns t d(off) turn - off- delay time - 23.6 - ns t f fall time - 17.4 - ns STU7LN80K5 electrical characteristics docid028830 rev 1 5 / 12 table 8: source drain diode symbol parameter test conditions min. typ. max. unit i sd source - drain current - 5 a i sdm (1) source - drain current (pulsed) - 20 a v sd (2) forward on voltage i sd = 5 a, v gs = 0 v - 1.6 v t rr reverse recovery time i sd = 5 a, di/dt = 100 a/s, v dd = 60 v (see figure 16: "test circuit for inductive load switching and diode recovery times" ) - 276 ns q rr reverse recovery charge - 2.13 c i rrm reverse recovery current - 15.4 a t rr reverse recovery time i sd = 5 a, di/dt = 100 a/s, v dd = 60 v, t j = 150 c (see figure 16: "test circuit for inductive load switching and diode recovery times" ) - 402 ns q rr reverse recovery charge - 2.79 c i rrm reverse recovery current - 13.9 a notes: (1) pulse width is limited by safe operating area (2) pulsed: pulse duration = 300 s, duty cycle 1.5% table 9: gate - source zener diode symbol parameter test conditions min. typ. max. unit v (br)gso gate - source breakdown voltage i gs = 1 ma, i d = 0 a 30 - v the built - in back - to - back zener diodes are specifically designed to enhance the esd performance of the device. the zener voltage facilitates efficient and cost - effective device integrity protection,thus eliminating the need for additional external componentry. electrical characteristics STU7LN80K5 6 / 12 docid028830 rev 1 2.2 electrical characteristics (curves) figure 2 : safe operating area figure 3 : thermal impedance figure 4 : output characteristics figure 5 : transfer characteristics figure 6 : gate charge vs gate - source voltage figure 7 : static drain - source on - resistance STU7LN80K5 electrical characteristics docid028830 rev 1 7 / 12 figure 8 : capacitance variations figure 9 : normalized gate threshold voltage vs temperature figure 10 : normalized v (br)dss vs temperature figure 11 : normalized on - resistance vs temperature figure 12 : source - drain diode forward characteristics figure 13 : maximum avalanche energy vs starting t j test circuits STU7LN80K5 8 / 12 docid028830 rev 1 3 test circuits figure 14 : test circuit for resistive load switching times figure 15 : test circuit for gate charge behavior figure 1 6 : test circuit for inductive load switching and diode recovery times figure 17 : unclamped inductive load test circuit figure 18 : unclamped inductive waveform figure 19 : switching time waveform STU7LN80K5 package information docid028830 rev 1 9 / 12 4 package information in order to meet environmental requirements, st offers these devices in different grades of eco pack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. 4.1 ipak type c package information figure 20 : ipak (to - 251) type c package outline 0068771_ik_typec_rev13 package information STU7LN80K5 10 / 12 docid028830 rev 1 table 10: ipak (to - 251) type c package mechanical data dim. mm min. typ. max. a 2.20 2.30 2.35 a1 0.90 1.00 1.10 b 0.66 0.79 b2 0.90 b4 5.23 5.33 5.43 c 0.46 0.59 c2 0.46 0.59 d 6.00 6.10 6.20 d1 5.20 5.37 5.55 e 6.50 6.60 6.70 e1 4.60 4.78 4.95 e 2.20 2.25 2.30 e1 4.40 4.50 4.60 h 16.18 16.48 16.78 l 9.00 9.30 9.60 l1 0.90 1.00 1.20 l2 0.90 1.08 1.25 1 3 5 7 2 1 3 5 STU7LN80K5 revision history docid028830 rev 1 11 / 12 5 revision history table 11: document revision history date revision changes 08- jan - 2016 1 first release. STU7LN80K5 12 / 12 docid028830 rev 1 important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications , and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant information on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of or der acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from t he information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics ? all rights reserved |
Price & Availability of STU7LN80K5
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
