TAT8884HO 50 ? 1000 mhz 75 ohm catv hybrid amplifier preliminary data sheet rev d 10-30-13 - 1 of 4 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com applications ? catv transmission ? optical node amplifier ? line extender ? trunk amplifier sot115j package product features ? 50-1000 mhz broadband performance ? 26 db gain at 1000 mhz ? stable gain over temperature ? excellent linearity ? differential output stage for superior cso ? +24 v supply voltage ? 440 ma operating current ? industry standard sot-115j package functional block diagram general description the TAT8884HO is a 75 ohm hybrid amplifier with a broadband frequency range of 50 to 1000 mhz. the TAT8884HO features high linearity and low noise. the input and output of the amplifier module are 75 ohms dc coupled to ground. this module operates from a single +24v supply. the TAT8884HO is packaged in a rohs-compliant, industry standard sot115j package. the TAT8884HO is targeted for use in catv transmission and distribution applications. pin configuration pin no. label 1 rf_in 2, 3, 5, 6, flange gnd (ground) 4 v b + 7 rf_out ordering information part no. description TAT8884HO hybrid amplifier standard box size = 25 pieces
TAT8884HO 50 ? 1000 mhz 75 ohm catv hybrid amplifier preliminary data sheet rev d 10-30-13 - 2 of 4 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com absolute maximum ratings parameter rating storage temperature ? 40 to +105c rf overload (single tone - 1 minute) 75 dbmv supply voltage (v b ) 5 minutes max 30 v operation of this device out side the parameter ranges given above may cause permanent damage. recommended operating conditions parameter min typ max units supply voltage (v b +) +24 v supply current 430 440 480 ma operating temp. range ? 30 +100 c electrical specifications ar e measured at specified test conditions. specifications are not guaranteed over all recommended operating conditions . temperature referenced at topside flange. electrical specifications test conditions unless otherwise noted: v b + =+24 v, flange temp.=+35c, zo=75 ohms parameter conditions min typ max units operational frequency range 50 1000 mhz gain f=1000 mhz 25.7 db gain tilt 0.8 db gain flatness straight line reference 0.5 db input return loss 50 to 1000 mhz 18 db output return loss 20 db noise figure 5 db cso 79 ch. ntsc + 80 ch. qam -6 db offset eq vout = +55 dbmv at 1 ghz with 18 db tilt -75 dbc ctb -78 -74 dbc xmod -70 -62 dbc ccn 59 62 db cso 79 ch. ntsc + 80 ch. qam -6 db offset eq vout = +50 dbmv at 547.25 mhz with 13.5 db tilt -75 dbc ctb -74 dbc xmod -64 dbc ccn 62 db supply current 440 ma
TAT8884HO 50 ? 1000 mhz 75 ohm catv hybrid amplifier preliminary data sheet rev d 10-30-13 - 3 of 4 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com pin configuration and description rf_in gnd gnd gnd gnd v b + rf_out pin no. symbol description 1 rf_in rf input. 75 ohm 2, 3, 5, 6, flange gnd (ground) rf/dc ground 4 v b + dc supply 7 rf_out rf output. 75 ohm . package marking and dimensions marking: part number ? TAT8884HO assembly code ? yywwarxxxx (?date code?, ar, ?lot code?) 1.500 1.085 1.242 1.755 0.312 0.165 0.100 0.500 0.490 0.390 0.840 0.810 2x 6-32 thru 2x .158 dia thru detail a detail a 0.200 0.158 0.010 0.040 0.600 0.019 0.100 0.1000 pin 1 notes: 1. all dimensions are in mils. angles are in degrees. 2. flange material is aluminum with nickel plating triquint TAT8884HO y ywwarxxx x
TAT8884HO 50 ? 1000 mhz 75 ohm catv hybrid amplifier preliminary data sheet rev d 10-30-13 - 4 of 4 - disclaimer: subject to change without notice ? 2013 triquint www.triquint.com product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: class 2 value: passes 2,000 v to <4,000 v test: human body model (hbm) standard: jedec standard jesd22-a114 esd rating: class iv value: passes > 1,000 v test: charged device model (cdm) standard: jedec standard jesd22-c101 solderability convection or infrared reflow ipc/jedec j-std-020 non-hermetic package, wave flow soldering is not recommended rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on t he use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1.503.615.9000 email: info-sales@triquint.com fax: +1.503.615.8902 for technical questions and application information: email: sjcapplications.engineering@triquint.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or li ability whatsoever for any of the information contained herein. triquint assume s no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is " and with all faults, and the entire risk associated with such information is entirely with the user. a ll information contained herein is subject to change without notice. customers should obtain and verify the latest relevant info rmation before placing orders fo r triquint products. the information contained herein or any use of such information does not grant, explic itly or implicitly, to any party any patent rights, licenses, or any other inte llectual property rights, whether with r egard to such information itself o r anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life-saving, or life- sustaining applications, or other applications where a fa ilure would reasonably be expected to cause severe personal injury or death.
|
