View CLAA150XP02_7802004.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cpt chunghwa pictures tubes, ltd., cpt confidential 0/16 CLAA150XP02-yih hsing-ver1-2004/05/05 c c h h u u n n g g h h w w a a p p i i c c t t u u r r e e t t u u b b e e s s , , l l t t d d . . t t e e c c h h n n i i c c a a l l s s p p e e c c i i f f i i c c a a t t i i o o n n to : yih hsing enterprise co.,ltd. d a t e : 2004/05/05 accepted by ?g approved by checked by prepared by tft-lcd product planning management general division chunghwa pictuer tubes, ltd. 1127 hopin rd., padeh, taoyuan, taiwan 334, r.o.c. tel: +886-3-3675151 fax: +886-3-377-3001 doc.no: CLAA150XP02-yih hsing-ver1-2004/05/05 issue date: 2004/05/05 cpt tft-lcd claa150xp 02 t- 3650002- 000- a new www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., revision status revision notice description rev. date ver1 - 2003/12/30 cpt confidential 1/16 CLAA150XP02- studio-ver1-2004/05/05 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 1. overview claa150xp 02 is 15.0? color tft-lcd (thin f ilm transistor liquid crystal display) module composed of lcd panel, driver ics, c ontrol circuit board and backlight. by applying 6 bit digital data, 1024768, 262k-color images are displayed on the 15.0? diagonal screen. input power voltage is 3.3v for lcd driving and interface of data and control signals is rsds. general specification are summarized in the following table: item specification display area(mm) 304.1 (h) 228.1 (v) (15.0 inch diagonal) number of pixels 1024(h) 768(v) pixel pitch(mm) 0.297(h) 0.297(v) color pixel arrangement rgb vertical strip display mode normally white, tn number of colors 262144 color gamun 65% brightness(cd/m^2) 250(cd/m 2 ) @8.0ma response time 16ms viewing angle (-70~70)(h), (-65~60)(v)(typ.) wide viewing angle technology super wide view film surface treatment hard coating:3h ; anti-glare electrical interface rsds total module power(w) 12.5 w module size(mm) 326.5 (w) 253.5 (h) 11.0 (d) (typ.) module weight(g) 1060(typ.) backlight unit 2 ccfls of edge light(top/bottom) the lcd products listed on this document are not suitable for use of aerospace equipment, submarine cables, nuclear reactor control system and life support systems. if customers intend to use these lcd products for above application or not listed in "standard" as follows, please contact our sales people in advance. standard: computer, office equipment, comm unication equipment, test and measurement equipment, machine tool, industrial robot , audio and visual equipment, other consumer products. 2. absolute maximum ratings item symbol min. max. unit remark power supply voltage for lcd vddd - 4.0 v iddd rush current irushd - 5.0 a note1 voltage of lamp vl 522 700 vrms current of lamp il 3 8.5 marms frequency of lamp fl 40 80 khz operation temperature top 0 50 j note2,3,4,5 storage temperature tstg -20 60 j note2,3,4 [note1] 100 g sec , if rise time of vddd increases, then i rush decrease. [note2] be without condensation while humidity ??90% rh, as below . [note3] humidity relative humidity ??90% (ta ?? 40j) wet bulb temperature ??39j(ta?40j) [note4] the performance becomes bad when the environment temperature or humidity is out of range. [note5] the surface temperature of display center ?? 60 j in operating. cpt confidential 2/16 CLAA150XP02- studio-ver1-2004/05/05 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., relative humidity(%rh) (40,90) (60,27.7) (50,50.4) storage range operating range 90 5 80 60 40 20 - 20 60 40 50 20 0 temperature(c) 3. electrical characteristics (a)tft-lcd item symbol min typ max unit remark logic input voltage for lcd vddd 3.0 3.3 3.6 v note1,3 logic input current for lcd iddd -- 600 700 ma note2 permissive input ripple voltage vrpd -- -- 100 mvp-p vin=+3.3v differential impedance zm 90 100 110 [ [note 1] 1) vcc-turn-on conditions: t1 ?? 10ms 1 sec ??t4 0 ??t2 ?? 50ms 200ms ??t5 0 ??t3 ?? 50ms 200ms ??t6 data t1 t2 t3 2.97v 2.97v 0.33v vin=3.3v 0.33 0.33v t4 lcd power supply logic signal studio-ver1-2004/05/05 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 2) vcc-dip conditions www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., (b)backlight item symbol min typ max unit remark lamp voltage vl 522 580 638 vrms il=8.0ma lamp current il 6 8.0 8.5 marms note1,4 lamp frequency fl 40 50 60 khz note2,4 1280 -- -- vrms ta=0 j starting lamp voltage vs 985 -- -- vrms ta=25 j lamp life time lt 30,000 40,000 -- hr il=8.0ma continuous operation turn on/off test - 100,000 times note5 [note1] measurement method of lamp current (the current meter is inserted in low voltage line) i n v e r t e r cth cth a a + - ctl + - ctl power supply lcd module [note2] the influence of lamp frequency this frequency range can keep the elect rical and optical character within 10% variation. lamp frequency may interfere with horizontal synchronous frequency (or vitical synchronous frequency), and then cause ripple noise on the display. therefore, please adjust the frequency of lamp input, be rem oved inveter from module as possible, or use electronic shielding between inverter and module to avoid the interference. [note3] definination of the lamp life the luminance reduced to 50% of initial value. [note4] wave request the degrees of unbalance: less than 10% the ratio of wave height: less than ??2 ?10% i- p i p ip: high side peak i-p: low side peak the degrees of umbalance = ip-i-p /irms*100(%) the ratio of wave height = ip(or i-p)/irms [note5] lamp turn on/off test condition a. swiching frequency: 10s (on) / 10s(off) b. lamp current: 8ma c. gauge: variation of the brightness > 50% of initial value variation of color coordinates < ? 0.015 of initial value cpt confidential 5/16 CLAA150XP02- studio-ver1-2004/05/05 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 4. interface pin connection (a) cn1(tft-lcd signal) used connector : af7506-a2git (p-two) pi n n o . symbol f unction pi n n o . symbol f unction 1 g nd 2 b 2p rsds blue data ( +) 3 b 2 n rsds blue data (-) 4 g nd 5 b 1p rsds blue data ( +) 6 b 1 n rsds blue data (-) 7 g nd 8 b 0p rsds blue data ( +) 9 b 0 n rsds blue data (-) 10 g nd 11 g2p rsds g reen data ( +) 12 g2 n rsds g reen data (-) 13 g nd 14 g1p rsds g reen data ( +) 15 g1 n rsds g reen data (-) 16 g nd 17 g0p rsds g reen data ( +) 18 g0 n rsds g reen data (-) 19 g nd 20 clk p rsds clk ( +) 21 clkn rsds clk (-) 22 g nd 23 r 2p rsds red data 24 r 2 n rsds red data (-) 25 g nd 26 r 1p rsds red data ( +) 27 r 1 n rsds red data (-) 28 g nd 29 r 0p rsds red data ( +) 30 r 0 n rsds red data (-) 31 g nd 32 s th start pulse 33 l p latch p ulse 34 po l m signal 35 hms data polarity inverting 36 g nd 37 clkv 38 s tv shift data pin 39 o e g ate driver o utput 40 nc 41 g nd 42 3 .3 v 3 .3 v 43 3 .3 v 3 .3 v 44 3 .3 v 3 .3 v 45 g nd 46 nc 47 nc 48 i d 0 p anel i d ( nc ) 49 i d 1 p anel i d (g nd ) 50 i d 2 p anel i d ( nc ) z gnd pin must be grounded. z please don?t ground nc pin or contact it with signal. (b) cn2 ,3(back light) backlight-side connector : bhsr-03vs-1(jst made) inverter-side connector : sm03b-bhs-1-tb(jst made) pin no. symbol function 1 cth1/2 vblh1 (high voltage) 2 - empty 3 ctl1/2 vbll1 (low voltage) cpt confidential 6/16 CLAA150XP02- studio-ver1-2004/05/05 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 5. interface timing (a) timing specifications item symbol min typ max unit clk pulse width tw 11.7 15.4 - ns clk pulse width (h) twh 6 - - ns clk pulse width (l) twl 6 - - ns data set-up time tst1 4 - - ns data hold time thd1 0.2 - - ns sth set-up time tst2 4 - - ns sth hold time thd2 4 - - ns sth pulse width twsth 1 1 2 clkp period lp pulse width (h) twlp - 8 - clkp period last data time tldt 1 - - clkp period clk-lp time tclk-lp 4 - - ns lp ? sth time tlp-sth 6 - - clkp period lp-pol time tlp-pol - 695 - clkp period hd pol-lp time tpol-lp - 641 - clkp period stv set-up time tst(stv) 1 - - 0 0 0 0 0 0 0 0 0 0 0 0 0 00 studio-ver1-2004/05/05 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., dxxp-dxxn (rsds) sth1 clkp-clkn (rsds) thd2 90% tst2 90% r(x) r(x+1) r(x) r(x+1) r(x) r(x+1) twl tst1 tst1 thd1 thd1 tw twh timing diagram 2 2) vertical timing chart tw ( clkv ) tl p- clkv t o e - clkv tw (o e ) tst ( s t v) twh( clkv ) twl ( clkv ) thd ( s t v) clkv s t v oe l p cpt confidential 8/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., (c) color data assignment r d ata g d ata b d ata r 5 r 4 r 3 r 2 r 1 r 0 g5 g4 g3 g2 g1 g0 b 5 b 4 b 3 b 2 b 1 b 0 c o l o r input data msb lsb msb lsb msb lsb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 b a s ic c o l o r white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red (0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green (0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 g reen green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue (0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 blue (2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1) definition of gray scale: color(n) : n indicates gray scale level. higher n means brighter level. 2) data:1-high, 0-low. (d) pixel mapping d( 1, 1) d( 2, 1) --- d( x, 1) --- d(1023, 1) d(1024, 1) d( 1, 2) d( 2, 2) --- d( x, 2) --- d(1023, 2) d(1024, 2) | | + | + | | d( 1, y) d( 2, y) --- d( x, y) --- d(1023, y) d(1024, y) | | + | + | | d( 1,767) d( 2,767) --- d( x,767) --- d(1023,767) d(1024,767)) d( 1,768) d( 2,768) --- d( x,768) --- d(1023,768) d(1024,768) cpt confidential 9/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 6. block diagram (a) tft-lcd module gate driver dc/dc converter voltage supply for gray levels and vcom cn 1 cn 3 cn 2 source driver back light back light lcd p anel 1024 3 768 tft-lcd module (b) b/l unit 1 3 ccfl back light cn2,3 1 3 cn2,3 dc-ac inverter ligh co ntr o inverter circuit (out side) cpt confidential 10/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 7. mechanical specification (a) front side unit: mm (t olerance is 0 . 5 mm unless noted ) cpt confidential 11/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., (b) rear side (with inverter) unit: mm (t olerance is 0 . 5 mm unless noted ) cpt confidential 12/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 8.optical characteristics ta=25 j ,vcc=5.0v item symbol condition min. typ. max. unit notes contrast ratio cr = = 0 00 00 = = 0 00 0 a = = 0 0 ? = = 0 0 = = 0 0 = = 0 0 00 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 00 0 00 0 00 = = 0 0 0 0 0 0 0 00 a and ? = 00 9 8 7 6 4 1 / 10 h 1 / 10 1 / 10 2 3 5 1 1 / 10 h h w (1024,768) (1,1) 384 512 measurement points viewing angle( c , r ) cpt confidential 13/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., *4) definition of response time (white - black) measurement equipment: westar tdr-100. luminance 90% 90% 10% tf tr white(255 th ) black(0) 10% 9.reliability test conditions (1) temperature and humidity test items conditions high temperature high humidity operation 40j , 95%rh, 240h (no condensation) high temperature high humidity storage 60j ,90%rh, 48h (no condensation) high temperature operation 50j, 240h low temperature storage -20 j, 240h thermal shock between -20j(1hr)and 60 j(1hr),100 cycles high temperature storage 60j, 240h low temperature operation 0 j, 240h (2)shock & vibration items conditions shock (non- operation) shock level:1470m/s^2(150g) waveform: half sinusoidal wave, 2ms number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs vibration (non- operation) vibration level: 9.8m/s^2(1.0g) zero to peak waveform: sinusoidal frequency range: 5 to 500 hz frequency sweep rate: 0.5 octave/min duration: one sweep from 5 to 500 to 5 hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3)judgment standard the judgment of the above test should be made as follow: pass: normal display image with no obvious non-uniformity and no line defect. partial transformation of the module parts should be ignored. fail: no display image, obvious non-uniformity, or line defects. cpt confidential 14/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 10. handling precautions for tft-lcd module please pay attention to the followings in handling- tft-lcd products; 1 assembly precaution (1) please use the mounting hole on the module side in installing and do not beading or wrenching lcd in assembling. and please do not drop, bend or twist lcd module in handling. (2) please design display housing in accordance with the following guide lines. (2.1) housing case must be destined carefully so as not to put stresses on lcd all sides and not to wrench module. the stresses may cau se non-uniformity even if there is no non- uniformity statically. (2.2) keep sufficient clearance between lcd m odule back surface and housing when the lcd module is mounted. approximately 1.0 mm of the clearance in the design is recommended taking into account the tolerance of lcd m odule thickness and mounting structure height on the housing. (2.3) when some parts, such as, fpc cable and ferrite plate, are installed underneath the lcd module, still sufficient clearance is required, such as 0.5mm. this clearance is, especially, to be reconsidered when the additional parts are implemented for emi countermeasure. (2.4) design the inverter location and connector position carefully so as not to give stress to lamp cable, or not to interface the lcd module by the lamp cable. (2.5) keep sufficient clearance between lcd module and the others parts, such as inverter and speaker so as not to interface the lcd modul e. approximately 1.0mm of the clearance in the design is recommended. (3) please do not push or scratch lcd panel surf ace with any-thing hard. and do not soil lcd panel surface by touching with bare hands. ( polari zer film, surface of lcd panel is easy to be flawed.) (4) please do not press any parts on the rear side su ch as source tcp, gate tcp, control circuit board and fpcs during handling lcd module. if pressing rear part is unavoidable, handle the lcd module with care not to damage them. (5) please wipe out lcd panel surface with absorben t cotton or soft cloth in case of it being soiled. (6) please wipe out drops of adhesives like saliv a and water on lcd panel surface immediately. they might damage to cause panel surface variation and color change. (7) please do not take a lcd module to pieces and reconstruct it. resolving and reconstructing modules may cause them not to work well. (8) please do not touch metal frames with bare ha nds and soiled gloves. a color change of the metal frames can happen during a long preservation of soiled lcd modules. (9) please pay attention to handling lead wire of backlight so that it is not tugged in connecting wit inverter. 2 operating precautions (1) please be sure to turn off the power suppl y before connecting and disconnecting signal input cable. (2) please do not change variable resistance settings in lcd module. they are adjusted to the most suitable value. if they are changed, it might happen lcd does not satisfy the characteristics specification. (3) please consider that lcd backlight takes longer time to become stable of radiation characteristics in low temperature than in room temperature. (4) a condensation might happen on the surface and inside of lcd module in case of sudden charge of ambient temperature. (5) please pay attention to displaying the same pattern for very long time. image might stick on lcd. if then, time going on can make lcd work well. (6) please obey the same caution descriptions as ones that need to pay attention to ordinary electronic parts. cpt confidential 15/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa pictures tubes, ltd., 3 precautfonswithelectrostatics (1) this lcd module use cmos-ic on circuit board and tft-lcd panel, and so it is easy to be affected by electrostatics. please be careful with electrostatics by the way of your body connecting to the ground and so on. (2) please remove protection film very slowly on the surface of lcd module to prevent from electrostatics occurrence. 4 storage precautions (1) when you store lcds for a long time, it is recommended to keep the temperature between 0 j ~40 j without the exposure of sunlight and to keep the humidity less than 90%rh. (2) please do not leave the lcds in the environment of high humidity and high temperature such as 60 j 90%rh. (3) please do not leave the lcds in the environment of low temperature; below -20 j . 5 safety precautions (1) when you waste lcds, it is recommended to crush damaged or unnecessary lcds into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. (2) if any liquid leaks out of a damaged-glass cell and comes in contact with the hands, wash off throughly with soap and water. 6 others (1) a strong incident light into lcd panel might cause display characteristics' changing inferior because of polarizer film, color filter, and other materials becoming inferior. please do not expose lcd module direct sunlight land strong uv rays. (2) please pay attention to a panel side of lc d module not to contact with other materials in preserving it alone. (3) for the. packaging box, please pay attention to the followings: (3.1) packaging box and inner case for lcd are de signed to protect the lcds from the damage or scratching during transportation. please do not open except picking lcds up from the box. (3.2) please do not pile them up more than 5 boxes. (they are not designed so.) and please do not turn over. (3.3) please handle packaging box with care not to give them sudden shock and vibrations. and also please do not throw them up. (3.4) packing box and inner case for lcds are made of cardboard. so please pay attention not to get them wet. (such like keeping them in high humidity or wet place can occur getting them wet.) cpt confidential 16/16 CLAA150XP02y- studio-ver1-2004/04/26 www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of CLAA150XP02

	To Download CLAA150XP02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .