part number: LUR12D5V t-1 3/4 (5mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4845 v3 checked : b.l.liu p.1/4 www.sunled.com features z low power consumption. z popular t-1 3/4 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z 5v internal resistor. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. absolute maximum ratings (t a =25c ) ur (gaasp/ gap) unit reverse voltage v r 5 v forward voltage v f 6 v power dissipation p t 85 mw operating temperature t a -40 ~ +70 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds operating characteristics (t a =25c ) ur (gaasp/ gap) unit forward current (typ.) (v f =5v) i f 13 ma forward current (max.) (v f =5v) i f 17.5 ma reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (v f =5v) p 627 nm wavelength of dominant emission (typ.) (v f =5v) d 625 nm spectral line full width at half-maximum (typ.) (v f =5v) ? 45 nm part number emitting color emitting material lens-color luminous intensity ( v =5v ) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUR12D5V red gaasp/gap red diffused 12 29 627 30
part number: LUR12D5V t-1 3/4 (5mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4845 v3 checked : b.l.liu p.2/4 www.sunled.com ? ur
part number: LUR12D5V t-1 3/4 (5mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4845 v3 checked : b.l.liu p.3/4 www.sunled.com remarks: if special sorting is required (e .g. binning based on luminous in tensity / luminous flux or wavelength), the typical accuracy o f the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% note: accuracy may depend on the sorting parameters.
part number: LUR12D5V t-1 3/4 (5mm) solid state lamp published date : mar 17, 2008 drawing no : sdsa4845 v3 checked : b.l.liu p.4/4 www.sunled.com packing & label specifications LUR12D5V
|