document number: 40006 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 11-may-09 85 solid tantalum chip capacitors t antamount ? , conformal coated, maximum cv, low esr 594d vishay sprague features ? large capacitance rating range ? lowest esr for a surface mount tantalum chip capacitor ? terminations: tin (2) standard ? 8 mm, 12 mm tape and reel packaging available per eia 481-1 and reeling per iec 286-3. 7" [178 mm] standard. 13" [330 mm] available. ? case code compatibility with eia 535baac and cecc30801 molded chips ? compliant to rohs directive 2002/95/ec performance/electri cal characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) note ? refer to doc. 40088 capacitance range: 1.0 f to 1500 f capacitance tolerance: 10 %, 20 % standard voltage rating: 4 wvdc to 50 wvdc equivalent series resistance: esr readings measured at 100 khz, + 25 c from 3500 m to 30 m notes ? preferred tolerance and reel sizes are in bold. ? we reserve the right to supply higher voltage ratings and tight er capacitance toler ance capacitors in the same case size. ? voltage substitutions will be ma rked with the higher voltage rating. ordering information 594d 477 x0 004 r 2 t type capacitance capacitance to l e r a n c e dc voltage rating at + 85 c case code termination packaging this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an ?r? (6r3 = 6.3 v). see ratings and case codes table 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) special order t = tape and reel 7" [178 mm] reel w = 13" [330 mm] reel see tape and reel specifications. dimensions in inches [millimeters] case code l (max.) w h a b d (ref.) j (max.) b 0.158 [4.0] 0.110 + 0.012 - 0.016 [2.8 + 0.3 - 0.4] 0.075 + 0.012 - 0.024 [1.9 + 0.3 - 0.6] 0.031 0.012 [0.80 0.30] 0.097 0.016 [2.5 0.4] 0.138 [3.5] 0.004 [0.1] c 0.281 [7.1] 0.126 0.012 [3.2 0.3] 0.098 0.012 [2.5 0.3] 0.051 0.012 [1.3 0.30] 0.180 0.024 [4.6 0.6] 0.236 [6.0] 0.004 [0.1] d 0.293 [7.5] 0.170 + 0.012/- 0.024 [4.3 + 0.3/- 0.6] 0.110 0.012 [2.8 0.3] 0.051 0.012 [1.3 0.30] 0.180 0.024 [4.6 0.6] 0.253 [6.4] 0.004 [0.1] r 0.283 [7.2] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.136 0.012 [3.5 0.3] 0.051 0.012 [1.3 .30] 0.180 0.024 [4.6 0.6] 0.243 [6.2] 0.004 [0.1] notes ? the anode termination (d less b) will be a minimum of 0.012" [0.3 mm]. * pb containing terminations are not rohs compliant, exemptions may apply l a b d (max.) (ref.) w j j h (max.) (max.) tantalum wire nib identifies anode (+) terminal
594d vishay sprague solid tantalum chip capacitors t antamount ? conformal coated, maximum cv, low esr www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 40006 86 revision: 11-may-09 ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 1.0 b 1.5 2.2 b 3.3 b 4.7 b b c 6.8 b c d 10 b b 15 b b c c/d r 22 b b b/c c d 33 b b b/c d r 47 b b/c c d r 68 b/c c/d d/r 100 b* b b/c c/d d r 120 c c r 150 b/c c/d d 180 d r 220 c/d c/d r 270 d 330 c* c/d d/r r 390 r 470 c/r d/r r 560 680 d r r 1000 r 1500 r note * preliminary values, contact factory for availability standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 4 wvdc at + 85 c, 2.7 wvdc at + 125 c 33 b 594d336x_004b2t 1.3 6 0.38 0.47 100* b* 594d107x_004b2t* 4.0* 8* 0.30* 0.53* 150 b 594d157x_004b2t 6.0 8 0.25 0.58 150 c 594d157x_004c2t 6.0 8 0.08 1.17 270 d 594d277x_004d2t 10.8 8 0.06 1.58 330* c* 594d337x_004c2t* 13.2* 8* 0.08* 1.17* 470 c 594d477x_004c2t 18.8 10 0.075 1.21 470 r 594d477x_004r2t 18.8 10 0.045 2.36 680 d 594d687x_004d2t 27.2 12 0.060 1.58 1500 r 594d158x_004r2t 60.0 20 0.030 2.89 6.3 wvdc at + 85 c, 4 wvdc at + 125 c 22 b 594d226x_6r3b2t 1.4 6 0.380 0.47 100 b 594d107x_6r3b2t 6.3 6 0.250 0.58 120 c 594d127x_6r3c2t 7.6 8 0.085 1.48 220 c 594d227x_6r3c2t 13.9 8 0.080 1.37 220 d 594d227x_6r3d2t 13.9 8 0.065 1.52 330 c 594d337x_6r3c2t 20.8 8 0.080 1.17 330 c 594d337x_6w3c2t 20.8 8 0.080 1.17 330 d 594d337x_6r3d2t 20.8 8 0.060 1.58 390 r 594d397x_6r3r2t 24.6 8 0.045 2.36 470 d 594d477x_6r3d2t 29.6 10 0.060 1.58 470 d 594d477x_6w3d2t 29.6 10 0.060 1.58 470 r 594d477x_6r3r2t 29.6 10 0.050 2.24 note * preliminary values, contact factory for availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?.
document number: 40006 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 11-may-09 87 594d solid tantalum ch ip capacitors t antamount ? conformal coated, maximum cv, low esr vishay sprague standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 6.3 wvdc at + 85 c, 4 wvdc at + 125 c 680 r 594d687x_6r3r2t 42.8 12 0.045 2.36 680 r 594d687x_6w3r2t 42.8 12 0.045 2.36 1000 r 594d108x_6r3r2t 63.0 16 0.030 2.89 1000 r 594d108x_6w3r2t 63.0 16 0.030 2.89 10 wvdc at + 85 c, 7 wvdc at + 125 c 15 b 594d156x_010b2t 1.5 6 0.50 0.41 33 b 594d336x_010b2t 3.3 6 0.50 0.41 47 b 594d476x_010b2t 4.7 6 0.40 0.46 68 b 594d686x_010b2t 6.8 6 0.350 0.49 68 c 594d686x_010c2t 6.8 6 0.100 1.05 100 b 594d107x_010b2t 10 12 0.250 0.57 100 c 594d107x_010c2t 10 8 0.095 1.08 120 c 594d127x_010c2t 10.2 7 0.095 1.08 150 c 594d157x_010c2t 15 8 0.090 1.11 150 d 594d157x_010d2t 15 8 0.075 1.41 180 d 594d187x_010d2t 14.4 7 0.090 1.29 220 c 594d227x_010c2t 22 8 0.100 1.05 220 d 594d227x_010d2t 22 8 0.065 1.52 330 d 594d337x_010d2t 33 8 0.065 1.52 330 r 594d337x_010r2t 33 8 0.045 2.36 470 r 594d477x_010r2t 47 10 0.045 2.36 680 r 594d687x_010r2t 68 14 0.045 2.36 16 wvdc at + 85 c, 10 wvdc at + 125 c 15 b 594d156x_016b2t 2.4 6 0.55 0.39 22 b 594d226x_016b2t 3.5 6 0.500 0.41 33 b 594d336x_016b2t 5.3 6 0.500 0.41 33 c 594d336x_016c2t 5.3 6 0.150 0.86 47 b 594d476x_016b2t 7.5 6 0.72 0.34 47 c 594d476x_016c2t 7.5 6 0.110 1.00 68 c 594d686x_016c2t 10.9 6 0.123 0.95 68 d 594d686x_016d2t 10.9 6 0.095 1.26 100 c 594d107x_016c2t 16 8 0.080 1.17 100 d 594d107x_016d2t 16 8 0.075 1.41 150 d 594d157x_016d2t 24 8 0.085 1.33 180 r 594d187x_016r2t 28.8 8 0.055 2.13 220 r 594d227x_016r2t 35.2 8 0.055 2.13 330 r 594d337x_016r2t 52.8 8 0.055 2.13 20 wvdc at + 85 c, 13 wvdc at + 125 c 4.7 b 594d475x_020b2t 0.9 6 0.90 0.31 6.8 b 594d685x_020b2t 1.4 6 0.90 0.31 10 b 594d106x_020b2t 2.0 6 0.85 0.32 22 b 594d226x_020b2t 4.4 6 0.60 0.38 22 c 594d226x_020c2t 4.4 6 0.150 0.86 47 c 594d476x_020c2t 9.4 6 0.140 0.89 47 d 594d476x_020d2t 9.4 6 0.095 1.26 100 d 594d107x_020d2t 20 8 0.085 1.33 120 r 594d127x_020r2t 24 8 0.080 1.77 25 wvdc at + 85 c, 17 wvdc at + 125 c 3.3 b 594d335x_025b2t 0.8 6 1.50 0.24 10 b 594d106x_025b2t 2.5 6 0.900 0.31 15 c 594d156x_025c2t 3.8 6 0.220 0.70 22 c 594d226x_025c2t 5.5 6 0.200 0.74 33 d 594d336x_025d2t 8.3 6 0.130 1.05 47 d 594d476x_025d2t 11.8 6 0.130 1.07 note * preliminary values, contact factory for availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?.
594d vishay sprague solid tantalum chip capacitors t antamount ? conformal coated, maximum cv, low esr www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 40006 88 revision: 11-may-09 capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 25 wvdc at + 85 c, 17 wvdc at + 125 c 68 d 594d686x_025d2t 17 8 0.200 1.00 68 r 594d686x_025r2t 17 6 0.095 1.60 100 r 594d107x_025r2t 25 8 0.090 1.67 35 wvdc at + 85 c, 23 wvdc at + 125 c 2.2 b 594d225x_035b2t 0.8 6 1.70 0.22 4.7 b 594d475x_035b2t 1.6 6 1.40 0.25 6.8 c 594d685x_035c2t 2.4 6 0.43 0.51 15 c 594d156x_035c2t 5.3 6 0.40 0.52 15 d 594d156x_035d2t 5.3 6 0.27 0.75 22 d 594d226x_035d2t 7.7 6 0.27 0.75 33 r 594d336x_035r2t 11.6 6 0.20 1.12 47 r 594d476x_035r2t 16.6 6 0.20 1.12 50 wvdc at + 85 c, 33 wvdc at + 125 c 1.0 b 594d105x_050b2t 0.5 4 3.5 0.16 4.7 c 594d475x_050c2t 2.4 6 0.8 0.33 6.8 d 594d685x_050d2t 3.4 6 0.45 0.58 15 r 594d156x_050r2t 7.5 6 0.35 0.85 note * preliminary values, contact factory for availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?. standard ratings typical curves at + 25 c, impedance and esr vs. frequency 100 1k 10k 100k 1m 10m 1000 100 10 1 0.1 2.2 f, 35 vdc 22 f, 6.3 vdc impedance esr frequency in hz "b" case "c" case 100 10 1.0 0.1 0.01 impedance esr 10 f, 25 vdc frequency in hz 100 f, 6.3 vdc 100 1k 10k 100k 1m 10m "d" case frequency in hz 100 10 1.0 0.1 0.01 impedance esr 220 f, 6.3 vdc 22 f, 25 vdc 100 1k 10k 100k 1m 10m "r" case frequency in hz 100 10 1.0 0.1 0.01 impedance esr 33 f, 35 vdc 390 f, 6.3 vdc 100 1k 10k 100k 1m 10m
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
