features ieee 802.3af ethernet compatible designed for amd ic manufacturers fully integrated for adapter, hub and motherboard applications rohs compliant* applications lan (local area network) ethernet PT61017PEL lan 10/100 base-tx *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci c applications. electrical speci cations @ 25 ? turns ratio tx ?3% ..............................1ct*:1ct* rx ?3% ..............................1ct*:1ct* inductance pin 1-3, 6-8 ..350 ? min. @ 100 khz, 0.1 vrms, 8 ma dc bias dcr pin 1-3, 6-8 ........................ 0.6 max. pin 9-11, 14-16 ................... 1.1 max. insertion loss 0.1-100 mhz .......1.1 db max. (tx/rx) return loss 30 mhz .............. -18 db min. (tx/rx) 60 mhz .............. -12 db min. (tx/rx) 100 mhz .............. -10 db min. (tx/rx) common mode rejection 30 mhz .............. -40 db min. (tx/rx) 50 mhz .............. -40 db min. (tx/rx) 100 mhz .............. -40 db min. (tx/rx) crosstalk 30 mhz .......... -38 db min. (tx to rx) 62 mhz .......... -38 db min. (tx to rx) 100 mhz .......... -38 db min. (tx to rx) hipot 1 ma, 2 sec. ......1500 vac (pri-sec) operating temperature ....0 ? to +70 ? *ct: center tap product dimensions electrical schematic 10/13 recommended layout material termination ........................................ tin packaging speci cations tape & reel ....................... 600 pcs./reel *rohs compliant 1ct : 1 ct 16 15 14 tx pcb side rj45 in 1 2 3 1ct : 1 ct 11 10 9 rx 6 7 8 1.27 (0.05) 0.46 (0.018) 8.89 (0.350) 6.90 (0.272) pin 1 12.80 ?0.25 (0.504 ?0.010) 9.30 (0.366) 0.25 0.13 (0.01 0.005) 5.65 (0.222) 0.7 0.15 (0.028 0.006) 0.3 (0.012) 0 ?~8 ? 1.27 (0.05) mm (inches) dimensions: 0.05 (0.002) tolerances: unless otherwise noted 8.89 (0.350) 7.10 (0.280) 10.50 ?0.25 (0.413 ?0.010) 0.76 (0.030) packaging speci cations end start user direction of feed 2.0 (.079) 0.4 (.016) 4.0 (.157) 1.9 (.075) 8 1.50 (.059) dia. 1.50 (.059) dia. 6.52 (.257) 11.42 (.450) 16.0 (.630) 11.5 (.453) 24.0 (.945) mm (inches) dimensions: 0.10 (0.004) tolerances: 600 pcs. per reel how to order pt61017 p e l model construction p = potted packaging e = tape and reel (600 pcs./reel) termination l = tin only (rohs compliant)
|
