ds28004 rev. d-3 1 of 2 j05-j10 plastic material - ul flammability classification 94v-0 surge overload rating of 60a peak capable of meeting the environmental tests in mil-std-750c high reliability and low leakage mechanical data characteristic symbol j05 j1 j2 j4 J6 j8 j10 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rsm 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified 9.5mm lead lengths @ t a = 75c i (av) 1.5 a peak forward surge current 8.3ms half sine-wave superimposed on rated load (jedec method) i fsm 60 a maximum forward voltage at 1.5a v f 1.0 v maximum dc reverse current @ t a = 25c at rated dc blocking voltage @ t a =125c i r 5.0 200 m a typical thermal resistance (note 1) r q ja 25.0 k/w typical junction capacitance (note 2) c j 15.0 pf storage and operating temperature range t j, t stg -65 to +175 c features terminals: axial lead, solderable per mil-std-202, method 208 case: molded plastic mounting position: any polarity: cathode band approx. weight: 0.4 gram rating at 25c ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. maximum ratings and electrical characteristics notes: 1. thermal resistance from junction to ambient pc board mounting, 9.5mm lead length. 2. measured at 1mhz and applied reverse voltage of 4.0 volts. a a b c d j05 - j10 1.5a silicon rectifier do-15 dim min max a 25.4 b 5.8 7.6 c 0.71 0.86 d 2.6 3.6 all dimensions in mm power semiconductor
ds28004 rev. d-3 2 of 2 j05-j10 20 40 60 80 100 120 140 160 180 200 .25 .50 .75 1.0 1.25 1.50 60hz resistive or inductive load single phase half wave .375" lead lengths pc board mounting ta, ambient temperature (oc) forward current derating curve average output current (amperes) number of cycles at 60hz maximum non-repetitive surge current 1 510 50 100 peak for ward surge current (amperes) 10 50 100 200 t = 150oc j 8.3ms single half sine wave reverse voltage (volts) typical junction capacitance (pf) 5 10 50 100 1 5 10 50 100 capacitance (pf) 1 t = 25oc j 0.01 0.1 1.0 instantaneous forward voltage, volts typical instantaneous forward voltage characteristics 0.6 1.0 1.2 1.4 1.6 0.8 pulse width = 300ms 2% duty cycle 4.0 t = 25oc j instantaneous for ward current (amperes)
|
