data brief for further information contact your local stmicroelectronics sales office. january 2012 doc id 17823 rev 2 1/3 3 ST-LINK in-circuit debugger/programmer for stm8 and stm32 features 5 v power supplied by usb connector usb 2.0 full speed interface compatible usb standard a to mini-b cable provided swim specific features: ? 1.65 v to 5.5 v application voltage supported on swim interface ? swim low speed and high speed modes supported ? swim programming speed rates of 9.7 kbytes/s in low speed, 12.8 kbytes/s in high speed ? swim cable for connection to an application with an erni standard connector vertical (ref: 284697 or 214017) or horizontal (ref: 214012) ? swim cable for connection to an application with pin headers or 2.54 mm pitch connector jtag/swd specific features: ? 3 v to 3.6 v application voltage supported on jtag/swd interface and 5 v tolerant inputs ? jtag/swd cable provided for connection to a standard jtag 20-pin pitch 2.54 mm connector direct firmware update feature supported status led which blinks during communication with pc operating temperature 0 to 50 c description the ST-LINK is an in-circuit debugger and programmer for the stm8 and stm32 microcontroller families. the swim and jtag/swd interface is used to communicate with the stm8 or stm32 microcontroller located on your own application board. stm8 applications use the usb full speed interface to communicate with stmicroelectronics? st visual develop (stvd) or st visual program (stvp) software. stm32 applications use the usb full speed interface to communicate with atollic ? , iar?, keil? or tasking? integrated development environments. table 1. device summary order code reference ST-LINK ST-LINK in-circuit debugger and programmer for the stm8 and stm32 www.st.com
revision history ST-LINK 2/3 doc id 17823 rev 2 1 revision history table 2. document revision history date revision changes 20-aug-2010 1 initial release. 06-jan-2012 2 added tasking to list of integrated development environments.
ST-LINK doc id 17823 rev 2 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
