published date : mar 04, 2008 drawing no : sdsa 2170 v4 checked : shin chi p.1/5 part number: DUY57A 56.9mm (2.3?) single digit numeric display www.sunled.com part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. DUY57A yellow gaasp/gap 8000 26490 590 common anode , rt.hand decimal absolute maximum ratings (t a =25c ) uy (gaasp/gap) unit reverse voltage per segment or ( dp) v r 20(10) v forward current per segment or ( dp) i f 30(30) ma forward current (peak) per segment or ( dp) 1/10duty cycle 0.1ms pulse width i fs 140(140) ma power dissipation per segment or ( dp) p t 300(150) mw operating temperature t a -40 ~ +85 storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3~ 5 seconds c uy (gaasp/gap) unit forward voltage (typ.) per segment or ( dp) (if=10ma) vf 7.8(3.9) v forward voltage (max.) per segment or ( dp) (if=10ma) vf 10(5.0) v reverse current per segment or (dp) (vr=20(10)v) ir 10(10) ua wavelength of peak emission (typ.) (if=10ma) p 590 nm wavelength of dominant emission (typ.) (if=10ma) d 588 nm spectral line full width at half-maximum (typ.) (if=10ma) ? 35 nm capacitance (typ.) (vf=0v, f=1mhz) c 20 pf operating characteristics (t a =25c ) features 2.3 inch digit height. low current operation. excellent character appearance. high light output. easy mounting on p.c. boards or sockets. multicolor available. mechanically rugged. standard: gray face, white segment. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3.specifications are subject to change without notice.
published date : mar 04, 2008 drawing no : sdsa 2170 v4 checked : shin chi p.2/5 part number: DUY57A 56.9mm (2.3?) single digit numeric display www.sunled.com ? uy
published date : mar 04, 2008 drawing no : sdsa 2170 v4 checked : shin chi p.3/5 part number: DUY57A 56.9mm (2.3?) single digit numeric display www.sunled.com
published date : mar 04, 2008 drawing no : sdsa 2170 v4 checked : shin chi p.4/5 part number: DUY57A 56.9mm (2.3?) single digit numeric display www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 04, 2008 drawing no : sdsa 2170 v4 checked : shin chi p.5/5 part number: DUY57A 56.9mm (2.3?) single digit numeric display www.sunled.com packing & label specifications DUY57A
|
