document number: 13050 www.vishay.com revision: 13-nov-07 3 PHMKDG vishay esta estadry d-type capacitor for indoor use ip53 estadry d-type three phase mk-power capacitor according to en60831-1/-2 for indoor application mk = metallized plastic film dielectric estadry mk-type capacitor fo r power factor correction in low voltage systems. rated voltages 400 v, 415 v, 440 v, 460 v, 525 v, 690 v, 760 v rated frequency 50 hz* rated output 50 kvar, other outputs upon request casing aluminum, welded and hermetically sealed degree of protection ip00, indoor (higher degrees of protection up to ip54 upon request) standards en60831-1/-2, iec60831-1/-2 (vde 0560-46/-47) losses (including discharge resistors) less than 0.45 w per kvar at upper temperature limit dielectric polypropylene film impregnant without, dry type, non-pcb, non-toxic electrodes self-healing safety devices self-healing dielectric and overpressure tear-off fuses external discharge resistors for u 50 v, t = 60 s (for ip00 version) temperature class - 25/d (max. 55 c), (- 40/d upon request) shelf temperature - 40/+ 70 c switch-in-current max. 300 x i n insulation 6/15 kv tests terminal/terminal: 2.15 x u n /2 s terminal/casing: 6000 v/2 s * can also be used for 60 hz. the output will be 1.2 times higher . a lower class of temperature might be taken into account. recommended torques style recommended torque terminals m8 6 nm terminals m10 10 nm m12 mounting stud 10 nm
PHMKDG vishay esta estadry d-type capaci tor for indoor use www.vishay.com document number: 13050 4 revision: 13-nov-07 required space for bulging discharge resistors 172 70 25 m12 m10 + 2 68 - 2 + 2 44 - 2 h 1 15.8 + 1 78 160 screw bolt m10 hexagonal nut m10 spring washer wave slotted nut m10 screw bolt m8 x 15 toothed lock washer hexagonal nut m12 y type rated voltage v rated output kvar capacitance f current a weight kg height h mm PHMKDG 400.3.50 400 50 3 x 331.6 72 app. 4.9 210 PHMKDG 415.3.40 415 40 3 x 246.4 56 app. 4.9 210 PHMKDG 415.3.50 415 50 3 x 308.0 70 app. 4.9 210 PHMKDG 440.3.50 440 50 3 x 274.0 66 app. 4.9 210 PHMKDG 440.3.56, 2 440 56.2 3 x 308.0 74 app. 4.9 210 PHMKDG 460.3.50 460 50 3 x 250.7 63 app. 4.9 210 PHMKDG 525.3.50 525 50 3 x 192.5 55 app. 4.9 210 PHMKDG 690.2.50 690 50 3 x 334.3 y 42 app. 4.9 210 PHMKDG 760.2.50 760 50 3 x 275.5 y 38 app. 4.9 210
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
