spec no: dsad0252 rev no: v.8 date: nov/12/2005 page: 1 of 6 approved: j. lu checked: allen liu drawn: f.li package dimension s attention observe precautions f or handling e lectrostatic discharge sensitive device s description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode. the green source color devices are made with ingan on sic light emitting diode. the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. p/n: kpkf - 3030survgpbec hyper red green / blue features o low power consumption. o 3.0mmx3.0mm smt led, 2.0mm(max.) thickness. o one red, one green and one blue chips in one package. o can produce any color in visible spectrum, including white light. o package : 1000pcs / reel. o rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.specifications are subject to change without notice. 3.0mmx3.0mm full - color surface mount led lamp
spec no: dsad0252 rev no: v.8 date: nov/12/2005 page: 2 of 6 approved: j. lu checked: allen liu drawn: f.li selection guid e note: 1 . 1 /2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c parameter hyper red green blue units power dissipation 170 105 120 mw dc forward current 30 30 30 ma peak forward current [1] 185 150 160 ma reverse voltage v operating/storage temperature - 40 c to +85 c 5 part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpkf - 3030survgpbec hyper red (ingaaip) water clear 110 220 green (ingan) 110 250 blue (ingan) 50 120 100 note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength hyper red green blue 640 520 465 nm i f =20ma d dominant wavelength hyper red green blue 628 525 470 nm i f =20ma ? 1/2 spectral line half - width hyper red green blue 27 38 25 nm i f =20ma c capacitance hyper red green blue 45 45 110 pf v f =0v;f=1mhz v f forward voltage hyper red green blue 1.9 3.5 3.7 2.5 4.5 4.3 v i f =20ma i r reverse current hyper red green blue 10 10 10 ua v r = 5v
spec no: dsad0252 rev no: v.8 date: nov/12/2005 page: 3 of 6 approved: j. lu checked: allen liu drawn: f.li kpkf - 3030survgpbec hyper red
spec no: dsad0252 rev no: v.8 date: nov/12/2005 page: 4 of 6 approved: j. lu checked: allen liu drawn: f.li green
spec no: dsad0252 rev no: v.8 date: nov/12/2005 page: 5 of 6 approved: j. lu checked: allen liu drawn: f.li blue
spec no: dsad0252 rev no: v.8 date: nov/12/2005 page: 6 of 6 approved: j. lu checked: allen liu drawn: f.li recommended soldering pattern (units : mm) tape specifications (units : mm) kpkf - 3030survgpbec remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
