View A050FW01V2_3488643.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version: 0.4 page: 0/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. doc. version 0.4 total page 20 date 2007/04/20 product specification 5" color tft-lcd module model name: a050fw01 v2 < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 200 6 au optronics all rights reserved. do not copy p romate internal use only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 2/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. record of revision version revise date page content 0.0 26/feb/2007 first draft. 0.1 20/mar/2007 4 add connector information 7 remove reliability range in the absolute maximum ratings 0.2 22/mar/2007 20 update outline drawing 0.3 03/apr/2007 18 correct ra spec (st -20 c~80 c, op -10 c ~70 c) 20 update outline drawing (fpc+component thickness) 0.4 20/apr/2007 8 update blu led structure and voltage/current spec (10 pcs by 1 serie changed to 7 pcs by 2 series) 13 update module brightness spec (typical 300 nits to 400 nits; minimum 250 nits to 350 nits) p romate internal use only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 3/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. contents a. physical specifications......................................................................4 b. electrical specifications.................................................................5 1. fpc p in a ssignment ........................................................................................................5 2. a bsolute m aximum r atings ............................................................................................8 c. electrical characteristics.............................................................8 1. tft- lcd t ypical o peration c ondition .........................................................................8 2. b acklight d riving c onditions ........................................................................................8 3. s uggested a pplication c ircuit ......................................................................................9 3.1 s uggested a pplication c ircuit 9 4. ac t iming .......................................................................................................................10 4.1 t iming d iagram 10 4.2 t iming c ondition 11 5. p ower o n /o ff s equence ..............................................................................................11 d. optical specification........................................................................13 e. touch screen panel specifications.............................................15 1. fpc p in a ssignment ......................................................................................................15 2. e lectrical c haracteristics .........................................................................................15 3. m echanical c haracteristics .......................................................................................16 4. l ife test c ondition .......................................................................................................16 5. a ttention .......................................................................................................................17 f. reliability test items:........................................................................18 g. packing form........................................................................................19 h. outline drawing:.................................................................................20 o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 4/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. physical specifications no. item specification remark 1 display resolution (dot) 480rgb (h) x 272 (v) 2 active area (mm) 110.88 (h) x 62.83 (v) 3 screen size (inch) 5.0 (diagonal) 4 dot pitch (mm) 0.077 (h) x 0.231 (v) 5 color configuration r. g. b. stripe note 1 6 color depth 16.7m colors note 2 7 overall dimension (mm) 120.7 (h) x 75.8 (v) x 4.31 (t) note 3 8 weight (g) 78.6 (typical) 9 touch panel surface treatment hard coating 3h 10 display mode normally white note 1: below figure shows dot stripe arrangement. note 2: full color display depends on 8-bit data signal (pin 5~28). note 3: not include fpc. refer to next page to get further information o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 5/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. electrical specifications 1. fpc pin assignment connector: fh12-50s-0.5sh pin no. symbol type description remark 1 gnd p ground 2 gnd p ground 3 vdd p power supply 4 vdd p power supply 5 r0 i red data (lsb) 6 r1 i red data 7 r2 i red data 8 r3 i red data 9 r4 i red data 10 r5 i red data 11 r6 i red data 12 r7 i red data (msb) 13 g0 i green data (lsb) 14 g1 i green data 15 g2 i green data 16 g3 i green data 17 g4 i green data 18 g5 i green data 19 g6 i green data 20 g7 i green data (msb) 21 b0 i blue data (lsb) 22 b1 i blue data 23 b2 i blue data 24 b3 i blue data 25 b4 i blue data 26 b5 i blue data 27 b6 i blue data www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 6/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 28 b7 i blue data (msb) 29 gnd p ground 30 dclk i pixel clock note 2 31 disp i disp : l display off disp : h display on note 2 32 hsync i horizontal sync signal note 2 33 vsync i vertical sync signal note 2 34 de i data enable note 2 35 u/d i shift up or down control 36 nc none connect 37 gnd p ground 38 gnd p ground 39 tp_r o touch panel right signal 40 tp_b o touch panel bottom signal 41 tp_l o touch panel left signal 42 tp_u o touch panel up signal 43 gnd p ground 44 gnd p ground 45 gnd p ground 46 vled- p led cathode 47 vled+ p led anode 48 gnd p ground 49 gnd p ground 50 gnd p ground note 1: i: input; o: output; p: power. note 2: for correct power on sequence please refer to section 5 power on/off sequence o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 7/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. pin 1 pin 50 o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 8/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 2. absolute maximum ratings item symbol min. max. unit remark power voltage vcc -0.3 4.5 v note 1 input signal voltage vi -0.3 vcc+ 0.3 v note 1: functional operation should be restricted under normal ambient temperature. c. electrical characteristics the following items are measured under stable condition and suggested application circuit. 1. tft- lcd typical operation condition item symbol min. typ. max. unit remark power supply option 1 vcc 3.1 3.3 3.5 v note 1 power supply option 2 vcc 2.5 2.65 2.75 v note 1 input high voltage vh 0.7*vcc - vcc v input low voltage vl 0 - 0.3*vcc vsync frequency f v 59.94 hz hsync frequency f h 17.14 khz dot frequency f dclk 9.0 15.0 mhz note 1: chose a power supply option that best comply with customer s application. 2. backlight driving conditions parameter symbol min. typ. max. unit remark led current i l - 20 - ma single serial led voltage v l - 23.1 - v single serial led life time l l - - - hr note 2, 3 note 1: led backlight is 14 leds. 23.1v note 2 :define led lifetime : brightness is decreased to 50% of the initial value. led lifetime is restricted under normal condition, ambient temperature = 25 and led current = 20ma. note 3: if it uses larger led current il more than 20ma, it maybe decreases the led lifetime. o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 9/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 0 0 0 led- led+ y1 x2 y2 x1 d0 d3 d6 d23 d10 d25 d14 disp d15 d1 d27 d24 d11 d21 d20 d26 d22 d16 d12 d5 hs d17 d2 vs d13 de d4 clk d7 u/d c24 4.7uf/10v 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 vdd 3. suggested application circuit 3.1 suggested application circuit note: resisters = 120ohm o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 10/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4. ac timing 4.1 timing diagram 4.1.1 vertical timing of input 4.1.2 horizontal timing of input tvp tvb tvd tvf tv 1h vsync hsync de 1st pixel last pixel invalid invalid th thp thb1/tc thdthf hsync de clk dn7 ~ dn0 p romate internal use only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 11/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4.2 timing condition 4.2.1. timing parameters parameter symbol min typ max unit clock cycle 1/tc - 9 15 mhz hsync cycle 1/fh - 17.14 - khz vsync cycle 1/fv - 59.94 - hz horizontal signal horizontal cycle *1 th - 525 - clk horizontal display period thd - 480 - clk horizontal front porch *2 thf 2 - - clk horizontal pulse width *2 thp 2 41 - clk horizontal back porch *2 thb 2 2 - clk vertical signal vertical cycle tv - 286 - h vertical display period tvd - 272 - h vertical front porch tvf 2 2 - h vertical pulse width tvp 2 10 - h vertical back porch tvb 2 2 - h *1. thd=480clk, thf=2clk, thp=41clk, thb=2clk 525clk=480clk + 2clk + 41clk + 2clk *2. thf + fhp + ftb > 44 5. power on/off sequence a. the lcd apopts high voltage driver ic, so it could be permanently damaged under a wrong power on/off sequence. the suggested lcd power sequence is below: power on sequence: vdd > 1ms disp >= 0ms display and data signals. power off sequence: disp >= 0ms display and data signals >= 0ms vdd. internal use only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 12/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. signals dclk, disp, hsync, vsync and de must be pulled low at power on. any power on glitches at these signal can cause abnormal display. below is an example of vsync signal demonstrating a signal glitch power on and a correct signal power on. o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 13/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. optical specification item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 15 25 - - ms ms note 4 contrast ratio cr at optimized viewing - 300 - note 6, 7 viewing angle top bottom left right cr10 R - - - - 40 60 60 60 - - - deg. note 8 brightness y l =0 350 400 - cd/m 2 note 9 x =0 0.26 0.31 0.36 white chromaticity y =0 0.28 0.33 0.38 note 1: measurement is in the dark room, optical ambient temperature =25, and backlight current il=20 ma note 2: to be measured in the dark room. note 3:to be measured on the center area of panel with a field angle of 1 by topcon luminance meter bm-7, after 10 minutes operation. note 4: definition of response time: the output signals of photo detector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. note 5. from liquid crystal characteristics, response time will become slower and the color of panel will become darker when ambient temperature is below 25. note 6. definition of contrast ratio: photo detector output when lcd is at white state photo detector output when lcd is at black state note 7. white vi=vi50 1.5v black vi=vi50 2.0v means that the analog input signal swings in phase with com signal. means that the analog input signal swings out of phase with com signal. vi50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of lcd panel when all the input terminals of module are electrically opened. contrastratio (cr)= r promate internal use only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 14/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 8. definition of viewing angle: refer to figure as below. note 9. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 15/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. e. touch screen panel specifications 1. fpc pin assignment pin no. symbol i/o 1 tp_r o 2 tp_b o 3 tp_l o 4 tp_u o 2. electrical characteristics item min. max. unit remark rate dc voltage 7 v x (film) 550 1300 resistance y (glass) 100 700 at connector linearity -1.5% 1.5% -- note 1 response time 20 ms insulation resistance 20 m dc 25v note 1: measurement condition of linearity: difference between actual voltage & theoretical voltage is an error at any points. linearity is the value max. error voltage divided by voltage difference on active area. o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 16/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 3. mechanical characteristics item min. max. unit remark hardness of surface 3 -- h jis k-5400 operation force (pen or finger) -- 40 gf note 1, 2 note 1: within guaranteed active area , but not on the edge and dot-spacer. note 2: measurement condition of operation force: within guaranteed active area . resistance, insulation resistance, and operation force should be under 5.2 & 5.3 condition. when user pushes down on the film, resistance between x & y axis must be equal or lower than 2k ? . below is test figure. 4. life test condition item min. max. unit remark notes life 10 5 -- times note 1, 2 input life 10 6 -- times note 1, 3 note 1: notes life test condition (by pen): notes area for pen notes life test is 10 9 mm. size of word is 7.5 6.75mm. word is any a.b.c .. letter. writing speed is 60mm/s. center of each word is changed at random in notes area. note 2: input life test condition( by finger): by silicone rubber tapping at same point. tapping load is 200g, and tapping frequency is 5hz. o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 17/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 5. attention l please pay attention for below matters at mounting design of touch panel of lcd module. l do not design enclosure pressing the view area to prevent from miss input. l enclosure support must not touch with view area. l use elastic or non-conductive material to enclosure touch panel. l do not bond film of touch panel with enclosure. l the touch panel edge is conductive. do not touch it with any conductive part after mounting. l if user wants to cleaning touch panel by air gun, pressure 2kg/cm2 below is suggested. not to blow glass from fpc site to prevent fpc peeled off. l do not put a heavy shock or stress on touch panel and film surface. ex. don t lift the panel by film face with vacuum. l do not lift lcd module by fpc. l please use dry cloth or soft cloth with neutral detergent (after wring dry) or one with ethanol at cleaning. do not use any organic solvent, acid or alkali liquor. l do not pile touch panel. do not put heavy goods on touch panel. u se only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 18/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. f. reliability test items: no. test items conditions remark 1 high temperature storage ta= 70 240hrs 2 low temperature storage ta= -10 240hrs 3 high ttemperature operation tp= 60 240hrs 4 low temperature operation ta= 0 240hrs 5 high temperature & high tp= 6 0 , 90% rh 240hrs operation 6 heat shock - 1 0 ~ 7 0 / 5 0 cycles 2 hrs/cycl e 7 electrostatic discharge 200v,200pf(0 ), once for each terminal frequency range 10~55hz stoke 1.5mm sweep 10~55~10hz 2 hours f or each direction of x,y,z 8 vibration ta= 70 non-operation jis c7021, a-10 condition a 2 hours for each direction of x,y,z (6 hours for total) 9 mechanical shock 100g . 6ms, x, y, z 3 times for each direction non-operation jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C 6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces note 1: ta: ambient temperature. note 2: squarely inspect all lcd function before and after ambient environment test. note 3: in the standard conditions, there is not display function ng issue occurred. all the cosmetic specification is judged before the reliability stress. o r p r o m a t e i n t e r n a l u s e o n l y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 19/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. g. packing form r nal use only www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 20/20 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. h. outline drawing: (tentative) n ly www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A050FW01V2

	To Download A050FW01V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .