* chromatic dispersion and additional losses should be taken into account. optical wavelength fiber output receiver loss conn 865 1310 1550 1270-1610 type mode suffix type power sensitivity budget range* type (cwdm) ?? led mm l0/l1 50/125 -16 dbm -34 dbm 18 db 3 km st ?? 62.5/125 ?? led mm l2/l3 09/125 -10 dbm -34 dbm 24 db 25 km fc ? laser sm l4 09/125 -3 dbm -36 dbm 33 db 25-90 km fc video audio data bi-directional video with two stereo audio channels the FMV-593 is a duplex video transmission system with two duplex audio ports, ideal for cctv cameras, video conferencing and its. status indicators on video, sync, fm data, carrier detect, voltage, temperature, and optical levels are monitored via leds. system design all units come in a small module or insert card version. the cards can be inserted into our 18-slot, 19? rackmountable card cage (cc-18-80w), or one of our smaller desk top card racks (dtcr series). the desk top card racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. they can sit on a flat surface as a larger stand-alone unit, or can be surface mounted with the flanges provided. each one of our card housings operates with an appropriate power supply. the regulated switching power supply has short circuit protection and an input operating voltage of 85-265 v ac . features ? multimode or singlemode operation over one fiber ? 8 mhz video bandwidth ? 10 hz to 20 khz audio bandwidth ? true dc restoration ? flat frequency response ? complies with rs-170 and rs-170a eia video standards ? compatible with ntsc, pal and secam ? no emi or rfi and no ground loops ? stand alone or rack mount ? ideal for cctv cameras, video conferencing and its 800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. FMV-593 duplex v /duplex 2a
video video in/out impedance 75 ? video in/out level 1 volt peak to peak, 1.5 volts max video bandwidth 5 hz to 7 mhz @ -3db differential gain < 1.0 % typical differential phase < 1.0 typical linearity 1.1 % typical tilt 0.5 % typical compatibility ntsc, pal, secam, rs-170, rs-170a signal to noise ratio >67 db using rs-250c standards @ 1 km fm carrier frequency 70 mhz connector type bnc audio audio in/out impedance 600 ? or 10k ? ? balanced or unbalanced audio in/out level -6 to +6 dbm frequency response 10 hz to 20 khz signal to noise ratio > 60 db total harmonic distortion < 1.0 %, 1 khz at maximum modulation connector type hi-density 15 pin db9 (de15) general dimensions & weight stand alone (sa): 7.16? l x 6.51? w x 1.75? h 53 oz insert card (ic): 6.3? l x 1.7? w x 4.0? h 29 oz operating temperature -20 c to +70 c storage temperature -30 c to +85 c humidity 0 to 95% non-condensing operating voltage 9 v dc (300 ma) or 110/220 v ac vibration up to 5 g's shock up to 12 g's diagnostics status monitoring led indicator sample configuration emissions: fcc part 15, ices-003, as/nzs, 3548, en55022 immunity: envs0204, en61000-4-2,3,4,5,6,11 safety: ul1950, can/csa 22.2, no.950-95 made in the usa fm video/audio/data transmission
|
