![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
g057vn01 v1 ver. 1.0 1/22 g057vn01 v1 preliminary specification final specification module 5.7 inch color tft-lcd model name g057vn01 v1 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2009/08/20 prepared by david hsing 2009/08/20 general display business division / au optronics corporation www..net
g057vn01 v1 ver. 1.0 2/22 g057vn01 v1 contents 1. operating precautions ........................... ................................................... ...... 4 2. general description ............................. ................................................... ........ 5 2.1 display characteristics .................................... ................................................... ................... 5 2.2 optical characteristics.................................... ................................................... .................... 6 3. functional block diagram ........................ ................................................... ... 8 4. absolute maximum ratings........................ ................................................... . 9 4.1 absolute ratings......................................... ................................................... ........................ 9 4.2 absolute ratings of environment ................................. ................................................... ...... 9 5. electrical characteristics...................... ................................................... ..... 10 5.1 tft-lcd driving .................................... ................................................... ........................... 10 5.2 backlight unit driving.................................. ................................................... ...................... 11 6. signal characteristic........................... ................................................... ....... 12 6.1 pixel format image...................................... ................................................... ..................... 12 6.2 scanning direction......................................... ................................................... ................... 12 6.3 the input data format...................................... ................................................... ................ 13 6.4 tft- lcd interface signal description........................... ................................................... .. 14 6.5 tft- lcd interface timing................................ ................................................... ................ 15 6.6 led backlight unit interface signal description....................... .......................................... 16 6.7 power on/off sequence...................................... ................................................... .......... 16 7. connector & pin assignment ...................... ................................................. 17 7.1 tft- lcd signal (cn1): lcd connector......................... ................................................... 17 7.2 led backlight unit (cn2): backlight connector....................... .......................................... 17 7.3 pin 1 definition of cn1 and cn2 .............................. ................................................... ....... 18 8. reliability test criteria ........................ ................................................... ...... 18 9. mechanical characteristics ...................... ................................................... . 20 10. label and packaging............................ ................................................... .... 21 10.1 shipping label (on the rear side of tft-lcd display) ..................... ................................ 21 10.2 carton package........................................... ................................................... ................... 21 11 safety .......................................... ................................................... ............... 22 11.1 keen edge requirements ...................................... ................................................... ........ 22 11.2 materials ........................................... ................................................... ............................... 22 11.3 capacitors .......................................... ................................................... ............................. 22 11.4 national test lab requirement .................................. ................................................... .... 22 www..net g057vn01 v1 ver. 1.0 3/22 g057vn01 v1 record of revision version and date page old description new description remark 0.1, may.22, 2009 all first edition preliminary specifications 11 max irush led = tbd max irush led = 1.5a section 5.2.1 11 v pwm dim (dimming control voltage high) min.: 1.5v v pwm dim (dimming control voltage high) min.: 2.0v section 5.2.1 11 operating life min.: 25000 hrs, typ.: 50000 hrs operating life min.: 50000 hrs section 5.2.1 16 led backlight unit interface pin 6 signal description: 0v-off; 3.3v/nc-on led backlight unit interface pin 6 signal description: 0v-off; 3.3~5v/nc-on section 6.6 1.0, aug.20, 2009 www..net g057vn01 v1 ver. 1.0 4/22 g057vn01 v1 1. operating precautions 1) display area (polarizer) of tft-lcd module is easily to be damaged, please be cautious and not to scratch it. 2) be sure to power off your machine before connecting or disconnecting your signal cable to tft-lcd module. 3) wipe off water drop on display area immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) display area (glass) of tft-lcd module may be broken or cracked if bump module against hard object. 6) to avoid esd (electro static discharde) damage, be sure to ground yourself before handling tft-lcd module. 7) do not open nor modify the tft-lcd module assembly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if tft-lcd module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the led reflector edge. instead, press at the far ends of the led reflector edge softly. otherwise the tft-lcd module may be damaged. 10) when inserting or removing of your signal cable to tft-lcd module, be sure not to apply abnormal force (rotate, tiltetc.) to the connector of the tft-lcd module. 11) tft-lcd module is not allowed to be twisted & bent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd modul e. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemption. 13) severe temperature condition may result in different luminance, response time. 14) continuous operating tft-lcd module under high temperature environment may accelerate led light bar exhaustion and reduce luminance dramatically. 15) the data on this specification sheet is applicable when tft-lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. its recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen. www..net g057vn01 v1 ver. 1.0 5/22 g057vn01 v1 2. general description g057vn01 v1 is designed for industrial display applications with vga (640 x rgb x 480) resoluti on and 262k colors (rgb 6-bits). it is composed of a tft-lcd panel, driver ics, control and power supply circuits board and backlight unit including led driver circuit. g057vn01 v1 offers cmos interface for display signal input. 2.1 display characteristics the following items are g057vn01 v1 characteristics summary at 25 (room temperature). items unit specifications screen diagonal inch 5.7 active area mm 115.2(h) x 86.4(v) pixels h x v 640 x 3(rgb) x 480 pixel pitch mm 0.18 x 0.18 pixel arrangement r.g.b. vertical stripe display mode tn, normally white nominal input voltage vdd volt 3.3 typ. typical power consumption watt 3.34w (lcd:0.46w/led blu: 2.88w) @ all black pattern, full load and v led =12v weight grams 160g (typ.), 175g (max.) physical size mm 144.0(h)x 104.6(v) x 12.3(d) (typ.) electrical interface cmos 6-bit parallel rgb surface treatment anti-glare, hardness 3h support color 262k colors the most suitable view angle 12 oclock temperature range operating storage (non-operating) o c o c -30 to +85 -30 to +85 rohs compliance rohs compliance www..net g057vn01 v1 ver. 1.0 6/22 g057vn01 v1 2.2 optical characteristics the optical characteristics are measured under stable co nditions at 25 (room temperature). item unit conditions min. typ. max. remark white luminance cd/m2 v led =12v, d pwm =100% (center point) 525 700 - note 1 uniformity % 5 points - 1.3 note 1, 2, 3 contrast ratio 500 800 - note 4 msec rising - 15 20 msec falling - 10 15 response time msec rising + falling - 25 35 note 5 degree degree horizontal (right) cr = 10 (left) 70 70 80 80 - - viewing angle degree degree vertical (upper) cr = 10 (lower) 60 60 70 70 - - note 6 white x 0.263 0.313 0.363 white y 0.279 0.329 0.379 red x 0.510 0.560 0.610 red y 0.280 0.330 0.380 green x 0.275 0.325 0.375 green y 0.535 0.585 0.635 blue x 0.100 0.150 0.200 color / chromaticity coordinates (cie 1931) blue y 0.055 0.105 0.155 color gamut % - 50 - note 1: measurement method equipment pattern generator, power supply, digi tal voltmeter, luminance meter (sr_3 or equivalent) aperture 1 w i t h 5 0 c m v i e w i n g d i s t a n c e test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment www..net g057vn01 v1 ver. 1.0 7/22 g057vn01 v1 note 2: definition of 5 points position (display act ive area: 115.2mm(w) x 86.4mm(h)) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 3: the luminance uniformity of 5 points is defined by d ividing the maximum luminance value by the minimum l uminance value at full white condition. note 4: definition of contrast ratio (cr): note 5: definition of response time: the output signals of photo detector are measured wh en the input signals are changed from white to bla ck (falling time) and from black to white (rising time), respectively . the response time interval definition is between 10% and 90% of amplitude. please refer to the figure as below. maximum brightness of five points w5 = m inimum brightness of five points contrast ratio (cr) = brightness @ white state brightness @ black state 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr www..net g057vn01 v1 ver. 1.0 8/22 g057vn01 v1 note 6: definition of viewing angle v i e w i n g a n g l e i s t h e m e a s u r e m e n t o f c o n t r a s t r a t i o 10, at the screen center, over 180 horizontal and 180 vertical range. the 180 horizontal ( l , r ) and 180 vertical ( h , l ) range are illustrated as following figure. 3. functional block diagram the following diagram shows the functional block of the g057vn01 v1 color tft/lcd module. www..net g057vn01 v1 ver. 1.0 9/22 g057vn01 v1 4. absolute maximum ratings 4.1 absolute ratings item symbo min max unit remark logic/lcd drive voltage vdd -0.3 +3.6 volt ta= 25 o c lcd input signal voltage vin -0.3 +3.6 volt ta= 25 o c led blu drive voltage v led 0 23 volt ta= 25 o c led dimming input voltage high v pwm 0 8 volt ta= 25 o c 4.2 absolute ratings of environment item symbol min max unit remark operating temperature top -30 +85 note 1, 2 operation humidity hop 5 95 %rh note 1, 2 storage temperature tst -30 +85 note 1 storage humidity hst 5 95 %rh note 1 note 1: maximum wet- b u l b s h o u l d b e 3 9 a n d n o c o n d e n s a tion. note 2: only operation is guaranteed. optical perfo rmance should be evaluated at 25 only. www..net g057vn01 v1 ver. 1.0 10/22 g057vn01 v1 5. electrical characteristics 5.1 tft-lcd driving 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 volt idd vdd current - 140 155 ma all black pattern (vdd=3.3v, at 60hz) i rush lcd inrush current - - 1.5 a note 1 pdd vdd power - 0.46 0.51 watt all black pattern (vdd=3.3v, at 60hz) vddrp allowable logic/lcd drive ripple voltage - - 100 mvp-p all black pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 0.5ms vdd www..net g057vn01 v1 ver. 1.0 11/22 g057vn01 v1 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd is off. parameter symbol min. typ. max. unit remarks high vih 0.7vdd - vdd volt logic input voltage for display signals low vil 0 - 0.3vdd volt high vih 0.7vdd - vdd volt input voltage for rl/ud low vil 0 - 0.3vdd volt 5.2 backlight unit driving 5.2.1 parameter guideline for led following characteristics are measured under stable con dition using a led driving board at 25 ( r o om temperature) symbol parameter min typ max units remark v led input voltage 9 12 20 volt i led input current - 0.24 a v led =12v, d pwm =100% p led power consumption - 2.88 w v led =12v, d pwm =100% i rush led inrush current - 1.5 a v led =12v, d pwm =100% dimming control voltage high 2.0 3.3 5.5 volt v pwm dim dimming control voltage low - - 0.2 volt f pwm dimming frequency 200 30k hz d pwm dimming duty cycle 1 100 % note 1,2 on control voltage 2 3.3 5.5 volt v led on/off off control voltage - - 0.8 volt note 3, 4 operating life 50000 - - hrs note 5, 6 note 1: pwm dimming function can be operated by pwm sig nal. pwm duty cycle can adjust white luminance. (pwm high: on and pwm low: off) note 2: pwm signal can not be floating and pull-down to ground when waiting. note 3: enable ( v led on/off ) must be turned on late than v led and pwm signal. note 4: enable ( v led on/off ) must be turned off early than v led and pwm signal. note 5: if g057vn01 v1 module is driven by high curre nt or at high ambient temperature & humidity conditi on. the operating life will be reduced. note 6: operating life means brightness goes down t o 50% initial brightness. minimum operating life ti me is estimated data. note 7: see section 6.6 for led backlight unit interface signal description www..net g057vn01 v1 ver. 1.0 12/22 g057vn01 v1 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of scan. note 1: tft-lcd interface signal description is shown in section 6.4. www..net g057vn01 v1 ver. 1.0 13/22 g057vn01 v1 6.3 the input data format this product displays 262,144 colors in terms of the 64 grey levels on rgb respectively. the following ta ble demonstrates the display of input data. www..net g057vn01 v1 ver. 1.0 14/22 g057vn01 v1 6.4 tft- lcd interface signal description note 1: low stands for 0v. high stands for 3.3v . nc stands for no connection. www..net g057vn01 v1 ver. 1.0 15/22 g057vn01 v1 6.5 tft- lcd interface timing 6.5.1 timing characteristics de mode only signal symbol min. typ. max. unit remark clock frequency (dotclk) 1/ t clock 23.9 25.2 34.2 mhz note1 period t h 770 800 1000 active t hd 640 horizontal section blanking t hb 130 160 360 t clock note1 period t v 516 525 570 active t vd 480 vertical section blanking t vb 36 45 90 t line note1 note 1: recommended frame rate is 60 hz. 6.5.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net g057vn01 v1 ver. 1.0 16/22 g057vn01 v1 6.6 led backlight unit interface signal description pin # symbol pin description 1 v led 12v input 2 v led 12v input 3 gnd ground 4 gnd ground 5 pwm dim 1~100% pwm dimming 6 led on/off 0v-off; 3.3~5v/nc-on note 1: nc stands for no connection 6.7 power on/off sequence vdd power, lcd interface signals and backlight on/off sequence are shown in the following chart. signals fr om any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 - 50 ms t3 0 - 50 ms t4 0 - 10 ms t5 200 - - ms t6 200 - - ms t7 500 - - ms on/off sequence should be applied to avoid abnormal function in the display. please make sure to turn off the power when you plug the cable into the input connector or pull th e cable out of the connector. www..net g057vn01 v1 ver. 1.0 17/22 g057vn01 v1 7. connector & pin assignment 7.1 tft- lcd signal (cn1): lcd connector manufacturer starconn connector model number 089h33-000100-g2-r, compatible with imsa-9637s-33y902 & elco 08-6210--033-340-800+ pin# symbol pin# symbol pin# symbol 1 gnd 12 gnd 23 b3 2 dotclk 13 g0 24 b4 3 nc 14 g1 25 b5 4 nc 15 g2 26 gnd 5 gnd 16 g3 27 de 6 r0 17 g4 28 vdd 7 r1 18 g5 29 vdd 8 r2 19 gnd 30 r/l 9 r3 20 b0 31 u/d 10 r4 21 b1 32 nc 11 r5 22 b2 33 gnd 7.2 led backlight unit (cn2): backlight connector manufacturer jst connector model number sm06b-srks-g-tb compatible with jst sm06b-srss-tb (ls) (sn) mating connecter model number jst shr-06v-bkhf-b or compatible pin # symbol pin # symbol 1 v led 4 gnd 2 v led 5 pwm dim 3 gnd 6 led on/off www..net g057vn01 v1 ver. 1.0 18/22 g057vn01 v1 7.3 pin 1 definition of cn1 and cn2 8. reliability test criteria items required condition remark temperature humidity bias 4 0 / 9 0 % , 3 0 0 h r note 2 high temperature operation 85 , 3 0 0 h r note 2 low temperature operation -3 0 , 3 0 0 h r note 2 high temperature storage 85 , 3 0 0 h o u r s note 2 low temperature storage -30 ,300 hours note 2 thermal shock test -20 /30 min ,60 /30 min ,100cycles note 2 hot start test 85 /1 hr (min.), power on/off per 5 minutes, repeat 5 times note 2 cold start test -30 /1 hr (min.), power on/off per 5 minutes, repeat 5 times note 2 shock test (non-operating) 50g,20ms,half-sine wave, (x, y, z) note 2 vibration test (non-operating) 1.5g, 10~200~10hz, sine wave, 30mins/axis, 3 directio n (x, y, z) note 2 esd contact discharge: 8kv, 150pf(330?) 1sec, 8 points, 25 times/point air discharge: 15kv, 150pf(330?) 1sec, 8 points, 25 t imes/point note 1,2 attitude test operating: 14,000 ft, ramp: 2000 ft/min, 8hrs non-operating: 40,000 ft, ramp: 2000 ft/min, 24hrs note 2 note1: according to en61000-4-2 esd class b criteria, s ome performance degradation is allowed. tft-lcd modu le is self-recoverable, no data lost and no hardware fa ilures after test. www..net g057vn01 v1 ver. 1.0 19/22 g057vn01 v1 note2: water condensation is not allowed for each test item s. each test is done by new tft-lcd module. dont use t he same tft-lcd module repeatedly for reliability t est. the reliability test is performed only to examine the tft-lcd module capability. to inspect tft-lcd module after reliability test, p lease store it at room temperature and room humidit y for 24 hours at least in advance. www..net g057vn01 v1 ver. 1.0 20/22 g057vn01 v1 9. mechanical characteristics www..net g057vn01 v1 ver. 1.0 21/22 g057vn01 v1 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max. capacity: 60 pieces tft-lcd module per carton max. weight: 12.95 kg per carton outside dimension of carton: 520(l)mm* 340(w)mm* 250( h)mm www..net g057vn01 v1 ver. 1.0 22/22 g057vn01 v1 11 safety 11.1 keen edge requirements there will be no keen edges or corners on the display assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhere in the tft-lcd module. if toxic materials are used, t hey will be reviewed and approved by the responsible auo toxicol ogist. 11.2.2 flammability all components including electrical components that do n ot meet the flammability grade ul94-v1 in the tft-l cd module will complete the flammability rating exceptio n approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability ra ting will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the tft-lcd mod ule, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the tft-lcd module will satisfy all requirements fo r compliance to ul 60950 (u.s.a. information technology equipment). www..net |
Price & Availability of G057VN01V1
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |