CPH3145 / cph3245 no.8166-1/5 applications ? relay drivers, lamp drivers, motor drivers, flash. features ? adoption of mbit process. ? high current capacitance. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). ? high allowable power dissipation. specifications ( ) : CPH3145 absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--50)80 v collector-to-emitter voltage v ces (--50)80 v collector-to-emitter voltage v ceo (--)50 v emitter-to-base voltage v ebo (--)6 v collector current i c (--)2 a collector current (pulse) i cp (--)4 a base current i b (--)400 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 0.9 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)40v, i e =0 (--)1 m a emitter cutoff current i ebo v eb =(--)4v, i c =0 (--)1 m a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)300ma 420 mhz output capacitance cob v cb =(--)10v, f=1mhz (16)8 pf marking : CPH3145 : be, cph3245 : dq continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn8166 d2004ea ts im tb-00000981 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. CPH3145 / cph3245 pnp / npn epitaxial planar silicon transistors dc / dc converter applications
CPH3145 / cph3245 no.8166-2/5 continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-emitter saturation voltage v ce (sat) i c =(--)1a, i b =(--)50ma (--165)130 (--330)260 mv base-to-emitter saturation voltage v be (sat) i c =(--)1a, i b =(--)50ma (--)0.9 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0 (--50)80 v collector-to-emitter breakdown voltage v (br)ces i c =(--)100 m a, r be =0 (--50)80 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0 (--)6 v turn-on time t on see specified test circuit. (35)35 ns storage time t stg see specified test circuit. (200)330 ns fall time t f see specified test circuit. (24)40 ns package dimensions switching time test circuit unit : mm 2150a 1 : base 2 : emitter 3 : collector sanyo : cph3 0.05 0.9 0.7 0.2 1.6 0.6 0.6 1.9 1 2 3 2.8 0.2 2.9 0.15 0.4 v r r b v cc =25v v be = --5v + + 50 w input output r l 100 m f 470 m f pw=20 m s i b1 d.c. 1% i b2 i c =10i b1 = --10i b2 =0.7a for pnp, the polarity is reversed. i c -- v ce i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a collector-to-emitter voltage, v ce -- v collector current, i c -- a --2.0 --1.6 --1.2 --0.8 --1.0 --1.4 --1.8 --0.4 --0.2 --0.6 0 0 --0.4 --0.2 --0.6 --0.8 --1.2 --1.0 --1.4 --1.6 --1.8 --2.0 i b =0 CPH3145 cph3245 --10ma --8ma --40ma 10ma 15ma 20ma 30ma 8ma 2ma 4ma 6ma i b =0 --4ma --6ma --2ma it08923 it08924 2.0 1.6 1.2 0.8 1.0 1.4 1.8 0.4 0.2 0.6 0 0 0.4 0.2 0.6 0.8 1.2 1.0 1.4 1.6 1.8 2.0 --20ma --60ma --80ma --100ma 50ma 40ma i c -- v be i c -- v be base-to-emitter voltage, v be -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a --2.00 --1.75 --1.25 --0.75 --1.50 --1.00 --0.50 --0.25 0 25 c --25 c ta=75 c 2.00 1.50 1.00 0.50 1.75 1.25 0.75 0.25 0 it08925 it08926 0 --0.2 --0.4 --0.6 --0.8 --1.0 0 0.2 0.4 0.6 0.8 1.0 --25 c 25 c ta=75 c cph3245 v ce =2v CPH3145 v ce = --2v
CPH3145 / cph3245 no.8166-3/5 h fe -- i c f t -- i c h fe -- i c cob -- v cb f t -- i c cob -- v cb collector current, i c -- a dc current gain, h fe collector current, i c -- a gain-bandwidth product, f t -- mhz collector current, i c -- a dc current gain, h fe collector current, i c -- a gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf 5 5 7 10 2 3 7 5 --0.1 7 --10 23 5 57 --1.0 23 23 7 CPH3145 f=1mhz cph3245 f=1mhz it08931 it08932 it08927 it08929 it08930 2 3 5 7 2 3 100 7 5 ta=75 c --25 c CPH3145 v ce = --2v 25 c ta=75 c --25 c cph3245 v ce =2v 25 c 7 5 3 100 2 7 22 33 57 --0.01 --0.1 --1.0 23 57 23 57 --0.01 --0.1 --1.0 cph3245 v ce =10v 23 23 57 10 3 5 3 5 7 100 2 2 7 23 57 0.01 0.1 3 23 57 0.1 2 CPH3145 v ce = --10v it08928 5 7 2 3 100 7 5 22 33 57 0.01 0.1 1.0 23 57 3 5 7 10 2 3 5 5 0.1 7 10 23 5 57 1.0 23 23 7 v ce (sat) -- i c v ce (sat) -- i c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v --25 c ta=75 c CPH3145 i c / i b =10 cph3245 i c / i b =10 it08933 it008934 3 2 5 --0.1 7 5 3 2 22 357 --0.1 --0.01 3 --1.0 22 357 --0.01 25 c --25 c ta=75 c 3 2 5 0.1 7 5 0.01 7 5 3 2 22 357 0.1 0.01 3 1.0 22 357 3 25 c
CPH3145 / cph3245 no.8166-4/5 v ce (sat) -- i c v be (sat) -- i c v ce (sat) -- i c v be (sat) -- i c a s o collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector-to-emitter voltage, v ce -- v collector current, i c -- a p c -- ta ambient temperature, ta -- c collector dissipation, p c -- w CPH3145 i c / i b =20 75 c ta= --25 c it08937 it08938 3 2 7 --1.0 --0.01 23 57 --0.1 23 23 57 --1.0 5 3 25 c --25 c ta=75 c CPH3145 i c / i b =20 it08935 3 2 5 --0.1 7 --1.0 7 5 3 2 22 357 --0.1 --0.01 3 --1.0 22 357 --0.01 25 c --25 c ta=75 c cph3245 i c / i b =20 it08936 3 2 5 0.1 0.01 7 5 3 2 22 357 0.1 0.01 3 1.0 22 357 7 25 c cph3245 i c / i b =20 75 c ta= --25 c 3 2 7 0.01 23 57 0.1 23 23 57 1.0 5 3 25 c 1.0 it08940 0 0 20 40 60 80 100 120 140 160 0.2 0.6 0.8 1.0 0.1 0.4 0.3 0.5 0.7 0.9 CPH3145 / cph3245 it08939 0.01 0.1 1.0 10 23 57 23 57 23 57 23 57 1.0 0.1 0.01 2 3 5 7 2 3 5 7 2 3 5 7 100ms dc operation 10ms i cp =4a i c =2a < 10 m s 100 m s 1ms 500 m s mounted on a ceramic board (600mm 2 5 0.8mm) CPH3145 / cph3245 ta=25 c single pulse for pnp minus sign is omitted mounted on a ceramic board (600mm 2 5 0.8mm)
CPH3145 / cph3245 no.8166-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2004. specifications and information herein are subject to change without notice. ps
|