xe102-100 series (ttl) xsis electronics, inc. 12620 w. 63rd st., shawnee, ks 66216 tel. 913-631-0448 fax. 913-631-1170 email xsis@xsis.com 05/00 frequency frequency stability 1 = + 0.1% 2 = + 0.05% 3 = + 0.01% 4 = + 0.005% 5 = + 0.002% * * option 5 not available for - 55 o c to +125 o c example: xe102-143-883b - 24.000 mhz = xe10 package with ?gull wing? leads, ttl, + 0.005% over -55 o c to +125 o c, mil-screened , and 24.000 mhz 1 = 0 o c to + 70 o c 2 = - 30 o c to + 85 o c 3 = - 55 o c to +125 o c operating temperature range add suffix ? 883b ? for mil-screened option ** enable/disable input is on pad 32. a ?low? level at the input disables the output. xe102 1 add suffix ? g ? for enable/disable option ** lcc package with ? gull wing ? leads standard specifications frequency range 400 khz to 90 mhz frequency accuracy @ + 25 o c+ 0.0015% ( + 15 ppm ) frequecy stability vs. temperature see options below operating temperature range see options below input voltage + 5 vdc + 10% input current @ +5.0 vdc 400.0 khz to 15.0 mhz 60 ma max. 15.1 mhz to 25.0 mhz 30 ma max. 25.1 mhz to 40.0 mhz 40 ma max. 40.1 mhz to 90.0 mhz 60 ma max. output ttl ( 10 loads ) symmetry 60/40% @ 1.4 vdc level rise & fall times ( 0.6 vdc to 2.2 vdc ) < 15 mhz 15 ns max. > 15 mhz 5 ns max. start-up time < 10 mhz 20 ms max. > 10 mhz 15 ms max. frequency stability vs. voltage + 0.0005% ( + 5 ppm ) max. (for 10% change in voltage) aging @ +25 o c+ 0.0005% ( + 5 ppm ) / year max. package, seal & lead finish conforms with the requirements of mil-prf-55310 contact xsis engineering for special requirements such as, output symmetry, start-up time, frequency accuracy, complementary outputs, multiple outputs, etc. ordering information ( select from options below ) : lead #40 lead #1 0.360? sq + .005 0.585? sq + .025 0.480? sq + .015 marking 0.085? max 0.040? + .010 0.040? + .005 ( 36 plcs ) 0.014? + .002 dia ( 40 plcs ) 0.070? 0.050? 0.050? + .005 0.02? x 45 ref. o lead # function 4 10 31 32 37 39 all others b+ b+ gnd enable gnd output nc (option)
|