rev 12.10.03 technical support: (888) 41-astec or (407) 241-2752 americas: (760) 930-4600 europe (uk) 44 (1384) 842-211 asia (hk) 852-2437-9662 114 special features electrical specs 150 watts lpq150 series input input range 85-132 vac or 170-264 vac automati- cally selected. 220-300 vdc frequency 47-63 hz inrush current 38 a max, cold start @ 25c efficiency 75% typical at full load emi filter meets fcc class b conducted cispr 22 class b conducted en55022 class b conducted vde 0878 pt3 class b conducted safety ground leakage current 0.5 ma @ 50/60 hz, 264 vac input output maximum power 110 w convection (75 w with cover) 150 w with 30 cfm forced air (130 w with cover) adjustment range 5% on main; 5-25 v on 4th output on lpq 152 & lpq 153 cross regulation 2% on output 1; 3% on outputs 2, 3 & 4 hold-up time 20 ms @110 w load at nominal line overload protection short circuit protection on all outputs. case overload protected @ 110-145% above peak rating overvoltage protection 5.7-6.7 vdc on main output logic control power failure ttl logic signal goes high 50-150 msec after 5 v output. it goes low at least 3 msec before loss of regulation remote inhibit requires an external ttl high signal to inhibit outputs remote sense compensates for 0.5 v lead drop min. will operate without remote sense connected. reverse connection protected. ? auto ranging input ? remote sense on main output ? remote inhibit ? single wire current sharing ?power fail ? built-in emi filter ? low output ripple ? 135 khz switching frequency ? overvoltage protection ? overload protection ? adjustable floating 4th output (on LPQ152 and lpq153 models) ? optional cover (-c suffix). see page 64. operating temperature: 0 to 50c ambient derate each output at 2.5% per degree from 50 to 70c electromagnetic susceptibility: designed to meet iec 801, -2, -3, -4, -5, -6, level 3 humidity: operating; non-condensing 5% to 95% vibration: three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 g peak 5 hz to 500 hz, operational storage temperature: -40 to 85c temperature coefficient: .04% per c mtbf demonstrated: >550,000 hours at full load and 25c ambient condition vde 0805/en60950 (iec950) 11774-3336-1260 (lc# 88585) ul ul1950 ei32002 csa csa 22.2-234 level 3 lr53982 nemko en 60950/emko-tue p95102999 (74-sec) 203 cb certificate and report 2061 ce mark (lvd) safety total power: 110-150 watts input voltage: 85-132 / 170-264 vac 220-300 vdc # of outputs: quad environmental
europe astec house, waterfront business park merry hill, dudley west midlands, dy5 1lx, uk telephone: 44 (1384) 842-211 facsimile: 44 (1384) 843-355 americas 5810 van allen way carlsbad, ca 92008 telephone: 760-930-4600 facsimile: 760-930-0698 115 www.astecpower.com ordering information asia units 2111-2116, level 21 tower1, metroplaza 223, hing fong road fwai fong, new territories hong kong telephone: 852-2437-9662 facsimile: 852-2402-4426 connector LPQ152 lpq153 lpq154 sk1 pin 1 inhibit -ve inhibit -ve inhibit -ve pin 2 inhibit +ve inhibit +ve inhibit +ve pin 3 +12 v +15 v +12 v pin 4 no connection no connection no connection pin 5 common common common pin 6 -sense -sense -sense pin 7 +sense +sense +sense pin 8 i share i share i share sk2 pin 1,2 +12 v +15 v +12 v pin 3,4,5 common common common pin 6 -12 v -15 v -12 v pin 7 pok pok pok pin 8 +5 v to +25 v (float) +5 v to +25 v (float) +24 v pin 9 common (float) common (float) common sk3 tb-1 common common common tb-2 +5 v +5 v +5 v sk4 pin 1 ground ground ground pin 3 line line line pin 5 neutral neutral neutral mating connectors (sk4) ac input: molex 09-50-8051 (usa) molex 09-91-0500 (uk) pins: 08-58-0111 (sk2) aux dc output/power fail: molex 09-50-8091 (usa) molex 09-91-0900 (uk) pins: 08-58-0111 (sk1) remote sense/remote inhibit: molex 51110-0851 (usa) pins: 503-94-8100 astec connector kit #70-841-010, includes al of the above. 4.25 (108.0) 1.5 (38.1) .75 (19.0) .5625 sk3 8.5 (216.0) 7.4 (188.0) 2.5 (63.5) .875 (22.25) sk2 sk4 #6-32 unc (8 places) 1 987654321 5 3 1 sk1 1234 8765 2 4th o/p adj 5v o/p adj do not adj model output minimum maximum load with maximum load with peak regulation 2 ripple number voltage load convection cooling 30 cfm forced air load 1 p/p (pard) 3 LPQ152 5 v 2 a 15 a 22 a 30 a 2% 50 mv 12 v .1 a 6 a 8 a 10 a 3% 120 mv -12 v .1 a 2 a 2.5 a 3 a 3% 120 mv 5-25 v 0 a 2.5 a 3 a 3 a 3% 240 mv, max. lpq153 5 v 2 a 15 a 22 a 30 a 2% 50 mv 15 v .1 a 4.8 a 6.4 a 8 a 3% 150 mv -15 v .1 a 1.6 a 2 a 2.4 a 3% 150 mv 5-25 v 0 a 2.5 a 3 a 3 a 3% 240 mv, max. lpq154 5 v 2 a 15 a 22 a 30 a 2% 50 mv 12 v .1 a 6 a 8 a 10 a 3% 120 mv -12 v .1 a 2 a 2.5 a 3 a 3% 120 mv 24 v .5 a 3.5 a 4.5 a 5 a +10 / -5% 240 mv 1. peak current lasting <30 seconds with a maximum 10% duty cycle. 2. at 25c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20 mhz bandwidth and 10 f in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 4. 4th output adjustable 5-25 v factory set at 5 v. 5. minimum loads are required. note: -c suffix added to the model number indicates cover option. pin assignments notes 1. specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is 0.02?. 3. specifications are for convection rating at factory settings unless otherwise stated. 4. remote inhibit requires an external 5v @ 10ma to activate. 5. mounting (6-32) maximum insertion depth is 0.12?. 6. warranty: 1 year 7. weight: 1.75 lb. / 0.80 kg lpq150 series
|
