 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 500W Compact High Power Amplifier for Satellite Communications DBS-Band The VZU-6995AY 500 Watt TWT High Power Amplifier-- high efficiency in a compact package. DBS-Band 500W Compact High Power Amplif ier Compact Easy to Maintain Provides 500 watts of power in a 5 rack unit package, digital ready, for wideband, single- and multi-carrier satellite service in the 17.3-18.4 GHz frequency band. Ideal for transportable and fixed earth station applications where space and prime power are at a premium. Efficient Modular design and built-in fault diagnostic capability with convenient and clearly visible indicators for easy maintainability in the field. Worldwide Support Employs a high efficiency dual-depressed collector helix traveling wave tube backed by many years of field-proven experience in airborne and military applications. Simple to Operate Backed by over three decades of satellite communications experience, and CPI's worldwide 24-hour customer support network that includes fifteen regional factory Service Centers. User-friendly microprocessor-controlled logic with integrated computer interface. Digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. Global Applications 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: marketing@satcom.cpii.com www.cpii.com/satcom Meets International Safety Standard EN-60215, Electromagnetic Compatibility 89/336/EEC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. DBS - B a n d SPECIFICATIONS, VZU-6995AY Electrical Frequency Output Power TWT Flange Bandwidth 17.3 to 18.4 GHz 500 W min. (56.99 dBm min.) 407 W min. (56.10 dBm min.) 1100 MHz 75 dB min. at rated power, 88 dB max. 78 dB min. at small signal, 90 dB max. 0 to 20 dB (via PIN diode attenuator) 0.25 dB/24hr max. (after 30 min. warmup) 1.0 dB over oper. temp. range (typical) 0.75 dB over 10C (typical) 0.02 dB/MHz max. 1.0 dB pk-pk max. 4.0 dB pk-pk max. 6.0 dB pk-pk max. 1.30:1 max. 1.30:1 max. 2.0:1 1.2:1 Any value -50 dBc below 10 kHz -20 [1.5 +log F(kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz Electrical (continued) Group Delay (in any 80 MHz band) Primary Power Voltage Frequency Power Consumption Power Factor Inrush Current 0.01 ns/MHz linear max. 0.001 ns/MHz sq. parabolic max. 0.5 ns pk-pk ripple max. Single phase, 208-240 VAC 10% 47-63 Hz 2.3 kVA typ. (small signal) 2.8 kVA max. 0.95 min. 200% max. OPTIONS: * Integral Linearizer Gain RF Level Adjust Range * Remote Control Panel * Redundant and Power Combined Subsystems Gain Stability At constant drive & temp. Over temp., constant drive (any frequency) Small Signal Gain Slope Small Signal Gain Variation Across any 80 MHz band Across the 1100 MHz band Across the 1100 MHz band, with linearizer Input VSWR Output VSWR Load VSWR Continuous operation Full spec compliance Operation without damage Residual AM, max. Environmental (Operating) Ambient Temperature Relative Humidity Altitude -10 to +50C operating -40 to +70C non-operating 95% non-condensing 10,000 ft. with standard adiabatic derating of 2C/1000 ft., operating; 50,000 ft., non-operating Designed for normal transportation environment per Section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms (1/2 sine pulse) in non-operating condition. Shock and Vibration Mechanical Cooling (TWT) Forced air with integral blower Rear air intake & exhaust Maximum external pressure loss allowable: 0.5 inches water column Type SMA female WR-62 waveguide flange, grooved, threaded UNC 2B 6-32 Type SMA female 19 x 8.75 x 24 in. (483 x 222 x 610 mm) 95 lbs (43 kg) max. RF Input Connection RF Output Connection RF Output Monitor Dimensions (W x H x D) Weight Phase Noise IESS-308/309 phase noise profile -6 dB AC fundamentals related -36 dBc Sum of spurs (370 Hz to 1 MHz) -47 dBc AM/PM Conversion Harmonic Output Noise and Spurious 2.5/dB max. for a single-carrier at 8 dB below rated power -60 dBc max. at rated power, second and third harmonics <-120 dBW/4 kHz, below 16.5 GHz <-65 dBW/4 kHz, 17.3 to 18.4 GHz <-60 dBW/4 kHz, in passband with linearizer <-105 dBW/4 kHz, 18.9 to 26.0 GHz <-125 dBW/4 kHz, 26.0 to 40.0 GHz 10 dB max.; 15 dB max. with optional integral linearizer -21 dBc or better with two equal carriers at total output power level 7 dB (4 dB with optional integral linearizer) below rated single-carrier output Heat and Acoustic Heat Dissipation Acoustic Noise 2,000 Watts max. 68 dBA (as measured at 3 ft.) Noise Figure Intermodulation Certificate Number: 30515 KEEPING YOU ON THE AIR not up in the air For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 54, ISSUE 9 08/06 PDF |
Price & Availability of VZU-6995AY
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |