|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
25W DC-DC Triple Output Converter Features : 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation Built-in EMI filter Remote ON-OFF control TKA30 series Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case Epoxy encapsulated 100% burn-in test Approvals: FCC / CE 2 years warranty SPECIFICATION ORDER NO. DC VOLTAGE CURRENT RANGE RATED POWER OUTPUT TKA30A-B +5V 350 ~ 3500mA 25W TKA30B-B 12V 31 ~ 310mA TKA30C-B TKA30A-C +5V 350 ~ 3500mA TKA30B-C 15V 25 ~ 250mA TKA30C-C RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 0.5% LOAD REGULATION VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE EFFICIENCY (Typ.) Note.4 +5V: 2.0%, V1: 5.0% +5V: 2.0%, V1: 5.0% 100KHz min. A: 9 ~ 18VDC 80% Full load No load Pi network Power on: R.C ~-Vin > 4.5~5.5VDC or open, Power off: R.C~ -Vin <0.8VDC or short Fuse recommended 110 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +85 (Refer to output load derating curve) 20% ~ 90% RH non-condensing B: 18~36VDC 82% A: 2.61A A: 40mA B: 1.27A B: 18mA C: 0.64A C: 10mA C: 36~72VDC 82% 80% 82% 82% INPUT DC CURRENT FILTER REMOTE CONTROL PROTECTION OVERLOAD PROTECTION (Note. 5) SHORT CIRCUIT WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes VIBRATION WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMC EMS IMMUNITY OTHERS MTBF DIMENSION WEIGHT I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 100Khrs min. MIL-HDBK-217F(25 110g ) 50.8*50.8*21.0mm or 2"*2"*0.82" inch (L*W*H) Mechanical Specification Unit: mm (inch) 30.48 (1.20) Pin Configuration 21 ( 0.82 ) Derating Curve 1.0 8 + 0.2/-0.1 Pin No. 1 2 3 4 5 6 7 8 50.8 ( 2.00 ) Output R.C No Pin -Vin +Vin +Vout +5V COM -Vout 100 5 6 7 LOAD (%) 45.72 ( 1.80 ) 80 BOTTOM VIEW 12.7 ( 0.50 ) SIDE VIEW 4321 22.9 ( 0.90 ) 15.24 ( 0.60 ) 2.5( 0.10 ) 5.8 ( 0.23 ) -25 0 25 50 71 85 100 50.8 ( 2.00) Ta ( ) NOTE 1.All parameters are specified at normal input, rated load, 25 70% RH Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:TKA30-SPEC 2008-05-20 |
Price & Availability of TKA30A-B |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |