|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
S/QUAD/SCQ842xx/B/06/02/2002 page 1 /2 F/GB Quadruple Relais statique de puissance Quad Power Solid State Relay * 4 Sortie AC synchrone : 12-280VAC-25A * Connection de puissance :Cosses FASTON * SCQ842000 without LED on control * SCQ842060 with LED on control * Four SSRs 12-280VAC x 25A Zero-Cross AC. * Power connections by FASTON terminal. * Random model on request * SCQ842000 without LED ; SCQ842060 with LED on each control 0,8 SCQ8420X0 3-32VDC control 4x 25A/230VAC output DIMENSIONS Application typique/Typical application 33 max 19,6 B2 O4,7 A1 A2 C1 -DC section C C2 D2 58 40,6 -DC section A +DC commun -DC section B -DC section D 47,6 D1 B1 B2 D1 D2 6,35 C1 24-280VAC C2 load B1 A1 24-280VAC SCQ A2 load load 24-280VAC load 24-280VAC TOLERANCES: 0,3 35 44,5 5,2 19,8 -DC section C -DC section A +DC commun -DC section B -DC section D 8,7 Caracteristiques de commande (a 20C) / Control characteristics (at 20C) For each section DC Parametre / Parameter Symbol Min Nom Max Tension de commande / Control voltage Uc 3 32 Courant de commande / Control current (@ Uc ) Ic see curve fig 1 Tension de relachement/Release voltage Uc off 1 Resistance interne / Input internal resistor fig.1 Rc see curve fig 1 Tension inverse / Reverse voltage Urv 30 Input voltage protection : chocks 1,2/50 wave clamping voltage up to 500V Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 2500 Tension assignee Isolement/Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range fig. 1 :Caracteristique d'entree / Control characteristic Unit V mA V V V VRMS VRMS V 12 11 10 9 8 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 U (VDC) Conditions I (mA) Symbol Typ. 90 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/QUAD/SCQ842xx/B/06/02/2002 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) For each section Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity 140 120 0,95K/W 4 ways 0,55K/W page 2 / 2 F/GB Conditions Symbol Typ. Unit Ue 230 V rms Uemin-max 12-280 V rms Up 600 V Usync 25 V Ua 8 V Ie AC-51 25 A rms Itsm 240 A Vd 1,2 V Ilk <1 mA Ie min 5 mA ton max 10 ms toff max 10 ms f 47-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 288 A2s 2kV criterion B 2kV crit.A with external VDR UL pending Ie nom ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x 140 * For other loads consult 120 100 80 Total wasted power (W) 100 80 3 ways celduc Pour autres charges consulter celduc Fig. 2 Courbes thermiques / Thermal characteristics 2 ways 1,6K/w 60 2,2K/W 60 40 without heatsink 40 20 0 0 2 4 6 1 way Connexions limites a 20A Connection limitation 20A 20 0 Random models on request 8 10 12 14 16 18 20 22 24 26 0 10 20 30 40 50 60 70 80 90 100 RMS load current (A) Ambient Temperature (C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 25A(Itsm=230A) Surge current : Itsm (Apeak) = f(t) for 25A models with Itsm =230A 250 Itsm (Apeak) 200 150 100 50 0 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 0,01 0,1 t(s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SCQ8420X0 | |
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |