![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CMH02 TOSHIBA High Efficiency Rectifier Silicon Epitaxial Type CMH02 Switching Mode Power Supply Applications Unit: mm * * * * * Repetitive peak reverse voltage: VRRM = 400 V Average forward current: IF (AV) = 3.0 A Low forward voltage: VFM=1.3 V (Max.) Very fast reverse recovery time: trr =50ns (Max.) Suitable for compact assembly due to small surface-mount package "M-FLATTM" (Toshiba package name) Absolute Maximum Ratings (Ta = 25C) Characteristics Repetitive peak reverse voltage Average forward current Peak one cycle surge forward current (non-repetitive) Junction temperature Storage temperature range Symbol VRRM IF (AV) IFSM Tj Tstg Rating 400 3.0 (Note 1) 40 (50 Hz) -40~150 -40~150 Unit V A A C C Note 1: T87C Device mounted on a ceramic board board size: 50 mm x 50 mm soldering land: 2 mm x2 mm board thickness:0.64t JEDEC JEITA Note 2: Using continuously under heavy loads (e.g. the application of TOSHIBA 3-4E1A high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the Weight: 0.023 g (typ.) reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical Characteristics (Ta = 25C) Characteristics Symbol VFM (1) Peak forward voltage VFM (2) VFM (3) Peak repetitive reverse current Reverse recovery time Forward recovery time IRRM trr tfr Test Condition IFM = 0.1 A (pulse test) IFM = 1.0 A (pulse test) IFM = 3.0 A (pulse test) VRRM = 400 V (pulse test) IF = 1 A, di/dt = -30 A/s IF = 1.0 A Device mounted on a ceramic board (board size: 50 mm x 50 mm) (soldering land: 2 mm x 2 mm) (board thickness: 0.64 t) Thermal resistance (junction to ambient) Rth (j-a) Device mounted on a glass-epoxy board (board size: 50 mm x 50 mm) (soldering land: 6 mm x 6 mm) (board thickness: 1.6 t) Device mounted on a glass-epoxy board (board size: 50 mm x 50 mm) (soldering land: 2.1 mm x 1.4 mm) (board thickness: 1.6 t) Thermal resistance (junction to lead) Rth (j-) Min Typ. 0.73 0.93 1.1 Max 1.3 10 50 100 60 A ns ns V Unit 135 C/W 210 16 C/W 1 2006-11-08 CMH02 Marking Abbreviation code H2 Part No. CMH02 Standard Soldering Pad Unit: mm 1.4 3.0 1.4 Handling Precaution The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device. VRRM: We recommend that the worst case voltage, including surge voltage, be no greater than 80% of the absolute maximum rating of VRRM for a DC circuit and be no greater than 50% of that of VRRM for an AC circuit. VRRM has a temperature coefficient of 0.1%/. Take this temperature coefficient into account designing a device at low temperature. IF(AV): We recommend that the worst case current be no greater than 80% of the absolute maximum rating of IF(AV). Carry out adequate heat design. If you can't design a circuit with excellent heat radiation, set the margin by using an allowable Tamax-IF (AV) curve. This rating specifies the non-repetitive peak current in one cycle of a 50-Hz sine wave, condition angle 180. Therefore, this is only applied for an abnormal operation, which seldom occurs during the lifespan of the device. We recommend that a device be used at a Tj of below 120 under the worst load and heat radiation conditions. Thermal resistance between junction and ambient fluctuates depending on the device's mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information. 2.1 2 2006-11-08 CMH02 iF - vF 100 PF (AV) - IF (AV) 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 0 Rectangular Waveform 0 180 360 Pulse test iF (A) Average forward power dissipation PF (AV) (W) 1.8 2.0 10 Instantaneous forward current 150C 75C 1 Tj = 25C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 Instantaneous forward voltage vF (V) Average forward current IF (AV) (A) T max - IF (AV) 160 160 Ta max - IF (AV) Maximum allowable ambient temperature Ta max (C) Device mounted on a glass-epoxy board: board size: 50 mm x 50 mm Soldering land: 6.0 mm x 6.0 mm board thickness: 1.6 t Maximum allowable lead temperature T max (C) 140 120 100 80 60 40 20 0 0 Rectangular Waveform 0 180 360 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 140 120 100 80 60 40 20 0 0 Rectangular Waveform 0 180 360 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 Average forward current IF (AV) (A) Average forward current IF (AV) (A) rth (j-a) - t 1000 500 Device mounted on a glass-epoxy board: board size: 50 mm x 50 mm Soldering land: 2.1 mm x 1.4 mm board thickness: 1.6 t Transient thermal impedance rth (j-a) (C/W) 300 100 50 30 Device mounted on a glass-epoxy board: board size: 50 mm x 50 mm Soldering land: 6.0 mm x 6.0 mm board thickness: 1.6 t 10 5 3 Device mounted on a ceramic board: board size: 50 mm x 50 mm Soldering land: 2.0 mm x 2.0 mm board thickness: 0.64 t 0.003 0.01 0.03 0.1 0.3 1 3 1 0.001 10 30 100 300 1000 Time t (s) 3 2006-11-08 CMH02 Surge forward current (non-repetitive) 50 Cj - VR 100 (Typ.) IFSM (A) Ta = 25C Ta = 25C f = 50 Hz 40 Cj (pF) 50 30 f = 1 MHz Peak surge forward current Junction capacitance 30 10 20 5 3 10 1 1 10 100 0 1 10 100 Reverse voltage VR (V) Number of cycles 4 2006-11-08 CMH02 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-08 |
Price & Availability of CMH02
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |