|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SPICE Device Model SI4567DY Vishay Siliconix Dual N- and P-Channel 40-V (D-S) MOSFET CHARACTERISTICS * N- and P-Channel Vertical DMOS * Macro Model (Subcircuit Model) * Level 3 MOS * Apply for both Linear and Switching Application * Accurate over the -55 to 125C Temperature Range * Model the Gate Charge, Transient, and Diode Reverse Recovery Characteristics DESCRIPTION The attached spice model describes the typical electrical characteristics of the n- and p-channel vertical DMOS. The subcircuit model is extracted and optimized over the -55 to 125C temperature ranges under the pulsed 0-V to 10-V gate drive. The saturated output impedance is best fit at the gate bias near the threshold voltage. A novel gate-to-drain feedback capacitance network is used to model the gate charge characteristics while avoiding convergence difficulties of the switched Cgd model. All model parameter values are optimized to provide a best fit to the measured electrical data and are not intended as an exact physical interpretation of the device. SUBCIRCUIT MODEL SCHEMATIC This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate data sheet of the same number for guaranteed specification limits. Document Number: 74147 S-60243Rev. A, 20-Feb-06 www.vishay.com 1 SPICE Device Model SI4567DY Vishay Siliconix SPECIFICATIONS (TJ = 25C UNLESS OTHERWISE NOTED) Parameter Static Gate Threshold Voltage VGS(th) VDS = VGS, ID = 250 A VDS = VGS, ID = -250 A VDS = 5 V, VGS = 10 V VDS = -5 V, VGS = -10 V VGS = 10 V, ID = 4.1 A Drain-Source On-State Resistancea rDS(on) VGS = -10 V, ID = -3.6 A VGS = 4.5 V, ID = 3.8 A VGS = -4.5 V, ID = -2.9 A Forward Transconductancea gfs VDS = 15 V, ID = 4.1 A VDS = -15 V, ID = -3.6 A IS = 1.5 A, VGS = 0 V IS = -1.6 A, VGS = 0 V N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch 1.4 1.9 97 67 0.049 0.056 0.056 0.097 9 6.3 0.72 0.80 0.048 0.058 0.056 0.097 15 7 0.80 -0.80 S V Symbol Test Condition Simulated Data Measured Data Unit On-State Drain Currenta ID(on) A Diode Forward Voltagea VSD V Dynamicb Input Capacitance CISS N-Channel VDS = 20 V, VGS = 0 V, f = 1 MHz P-Channel VDS = - 20 V, VGS = 0 V, f = 1 MHz N-Ch P-Ch N-Ch P-Ch N-Ch P-CH VDS = 20 V, VGS = 10 V, ID = 5 A Total Gate Charge Qg VDS = - 20 V, VGS = -10 V, ID = - 5 A N-Ch P-Ch N-Ch N-Channel VDS = 20 V, VGS = 4.5 V, ID = 5 A P-Channel VDS = - 20 V, VGS = -4.5 V, ID = - 5 A P-Ch N-Ch P-Ch N-Ch P-Ch 471 567 53 76 25 57 6.5 10.5 3.3 5.7 1.1 1.5 1.4 2.7 355 480 50 80 29 56 8 12 3.7 6 1.1 1.5 1.4 2.7 nC pF Output Capacitance COSS Reverse Transfer Capacitance CRSS Gate-Source Charge Qgs Gate-Source Charge Qgs Notes a. Pulse test; pulse width 300 s, duty cycle 2%. b. Guaranteed by design, not subject to production testing. www.vishay.com 2 Document Number: 74147 S-60243Rev. A, 20-Feb-06 SPICE Device Model SI4567DY Vishay Siliconix COMPARISON OF MODEL WITH MEASURED DATA (TJ=25C UNLESS OTHERWISE NOTED) N-Channel MOSFET Document Number: 74147 S-60243Rev. A, 20-Feb-06 www.vishay.com 3 SPICE Device Model SI4567DY Vishay Siliconix P-Channel MOSFET www.vishay.com 4 Document Number: 74147 S-60243Rev. A, 20-Feb-06 |
Price & Availability of SI4567DY |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |