![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PRELIMINARY NJW1164 AUDIO PROCESSOR with BBE s GENERAL DESCRIPTION The NJW1164 is a TV audio processor with sound enhancement (BBE). The NJW1164 contains all necessary functions to process TV audio signal such as volume control, tone control, balance, mute, AGC and NJRC's proprietary surround sound process, eala. The eala reproduces a natural surround sound with clear vocal orientation. 2 The total modes and variables are controlled by the I C bus interface. s PACKAGE OUTLINE NJW1164L NJW1164M s FEATURES q Operating Voltage 7.5 to 13V 2 q I C BUS Interface q BBE Sound Enhancement (Low Boost and High Boost: 15dB max.) q eala (NJRC Original Surround) q AGC Circuit (It reduces volume difference among input sources.) q Simulated Surround q Bi-CMOS Technology q Package Outline SDIP30, SDMP30 s BLOCK DIAGRAM VOL1 BBE TONE VOL2 I2C Bus Interface AGC eala & Sim ulated Surround VOL1 BBE TONE VOL2 Bias -1- NJW1164 s PIN FUNCTION PRELIMINARY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 INa BBE1a BBE2a BBEOUTa TONE INa TONE-Ha TONE-La OUTa AGC SS-FIL CVB CVA SDA SCL GND INb BBE1b BBE2b BBEOUTb TONE INb TONE-Hb TONE-Lb OUTb SR-FIL VREF CTH CTL AUX0 AUX1 Vcc 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Symbol INa BBE1a BBE2a BBE OUTa TONE INa TONE-Ha TONE-La OUTa AGC SS-FIL CVB CVA SDA SCL GND Ach Input Function Ach BBE Filter1 (Process) Ach BBE Filter2 (Lo Contour) Ach Output for the Other Accessories Ach Input From the Other Accessories Ach Treble Filter Ach Bass Filter Ach Output AGC Filter Simulated Stereo Filter Pop Noise Reduction for Volume & Balance Pop Noise Reduction for Volume & Balance SDA Data Input (I2C BUS) SCL Data Input (I C BUS) GND 2 No 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol Vcc AUX1 AUX0 CTL CTH VREF SR-FIL OUTb TONE-Lb TONE-Hb TONE INb BBE OUTb BBE2b BBE1b INb Power Supply Pin Auxiliary Output1 Auxiliary Output0 Function Pop Noise reduction for Bass Control Pop Noise reduction for Treble Control Reference Voltage Surround Filter Bch Output Bch Bass Filter Bch Treble Filter Bch Input from the Other Accessories Bch Output for the Other Accessories Bch BBE Filter2 (Process) Bch BBE Filter1 (Lo Contour) Bch Input -2- PRELIMINARY s ABSOLUTE MAXIMUM RATING (Ta=25C) PARAMETER Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V + NJW1164 RATING 15 700 -20 to +75 -40 to +125 UNIT V mW C C PD Topr Tstg s ELECTRICAL CHARACTERISTICS (Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified) PARAMETER Operating Voltage Supply Current Reference Voltage Maximum Input Voltage Maximum Output Voltage Channel Balance Balance Boost A Balance Cut A Balance Boost B Balance Cut B Total Harmonic Distortion Maximum Gain Minimum Gain Channel Separation Output Noise 1 Output Noise 2 AUX Output Voltage SYMBOL V + TEST CONDITION MIN. 7.5 TYP. 9.0 13 4.5 3.0 2.5 0.0 0.0 0.0 0.0 -90 (31.6) -106 (5.0) - MAX. 13.0 25 5.0 1.5 2.0 -70 2.0 -70 0.5 2.0 -70 -70 -85 (56.2) -96 (15.8) 5.0 0.3 UNIT V mA V Vrms Vrms dB dB dB dB dB % dB dB dB dBV (Vrms) dBV (Vrms) V ICC VREF VIM VOM GCB BABST BACUT BBBST BBCUT THD GVMAX GVMIN CS VNO1 VNO2 VAUX No Signal No Signal VOL=-20dB,THD=1% OUTPUT VOL=0dB,THD=1% VOL=0dB CHS="0", BAL="11111" CHS="1", BAL="11111" Vin = 1Vrms CHS="1", BAL="11111" CHS="0", BAL="11111" Vin = 1Vrms Vo=0.5Vrms BW=400Hz to 30kHz VOL= 0dB VOL= MUTE Vin = 2Vrms Ain Bout, Bin Aout VOL = 0dB BW=400Hz to 30kHz VOL = MUTE BW = 400Hz to 30kHz Logic Output: High Logic Output: Low 4.0 2.8 -1.5 -2.0 -2.0 -2.0 4.5 0 BW: Band Width -3- NJW1164 TONE CONTROL PARAMETER High Frequency Boost High Frequency Flat High Frequency Cut Low Frequency Boost Low Frequency Flat Low Frequency Cut SYMBOL HFBST HFFLT HFCUT LFBST LFFLT LFCUT PRELIMINARY TEST CONDITION BCT="1", TREB="1111", f=10kHz TRBE="0000", f=10kHz BCT="0", TRBE="1111", f=10kHz BCB="1", BASS="1111", f=100Hz BASS="0000", f=100Hz BCB="0", BASS="1111", f=100Hz MIN. 12.5 -2.0 -17.5 12.5 -2.0 -17.5 TYP. 15.0 0.0 -15.0 15.0 0.0 -15.0 MAX. 17.5 2.0 -12.5 17.5 2.0 -12.5 UNIT dB dB dB dB dB dB SUB-TONE CONTROL PARAMETER High Frequency Boost High Frequency Cut Low Frequency Boost Low Frequency Cut SYMBOL SHFBST SHFCUT SLFBST SLFCUT TEST CONDITION BCST="1", SUB-TREB="11", f=10kHz BCST="0", SUB-TREB="11", f=10kHz BCSB="1", SUB-BASS="11", f=100Hz BCSB="0", SUB-BASS="11", f=100Hz MIN. 2.0 -4.0 2.0 -4.0 TYP. 3.0 -3.0 3.0 -3.0 MAX. 4.0 -2.0 4.0 -2.0 UNIT dB dB dB dB AGC CONTROL PARAMETER AGC Boost AGC Flat1 AGC Flat2 AGC Flat3 AGC Flat4 AGC Cut SYMBOL AGCBST AGCFLT1 AGCFLT2 AGCFLT3 AGCFLT4 AGCCUT TEST CONDITION Vin=50mVrms, f=1kHz Vin=150mVrms, f=1kHz Vin=300mVrms, f=1kHz Vin=400mVrms, f=1kHz Vin=540mVrms, f=1kHz Vin=2Vrms, f=1kHz MIN. 1.5 -2.5 -2.5 -2.5 -2.5 -14 TYP. 3.5 0.0 0.0 0.0 0.0 -10 MAX. 5.5 2.5 2.5 2.5 2.5 -6.0 UNIT dB dB dB dB dB dB BBE PARAMETER BBE Low Frequency Boost Range BBE High Frequency Boost Range SYMBOL BBELOW BBEHIGH TEST CONDITION BBE-Low="1111", f = 50Hz BBE-High="1111", f = 10KHz MIN. TYP. 15.0 15.0 MAX. UNIT dB dB SURROUND (SURROUND-ON) PARAMETER Surround Gain1 Surround Gain2 Surround Gain3 Surround Gain4 Simulated Surround Gain1 Simulated Surround Gain2 SYMBOL SRGAIN1 SRGAIN2 SRGAIN3 SRGAIN 4 SRSIM1 SRSIM2 TEST CONDITION AinAout, f=100Hz SUR0="0", SUR="1" AinBout, f=100Hz SUR0="0", SUR="1" AinAout, f=100Hz SUR0="1", SUR="1" AinBout, f=100Hz SUR0="1", SUR="1" Ain+BinAout, f=1kHz SUR0="1", SUR="0" Ain+BinBout, f=1kHz SUR0="1", SUR="0" MIN. 6.0 1.6 10.7 8.4 1.0 1.0 TYP. 8.0 3.6 12.7 10.4 3.0 3.0 MAX. 10.0 5.6 14.7 12.4 5.0 5.0 UNIT dB dB dB dB dB dB -4- PRELIMINARY s I C BUS BLOCK CHARACTERISTICS (SDA, SCL) PARAMETER High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current Low Level Output Voltage (3mA at SDA pin) Maximum Output Current Maximum Clock Frequency Data Change Minimum Waiting Time Data Transfer Start Minimum Waiting Time Low Level Clock Pulse Width High Level Clock Pulse Width Minimum Start Preparation Waiting Time Minimum Data Hold Time Minimum Data Preparation Time Rise Time Fall Time Minimum Stop Preparation Waiting Time I C BUS Load Condition: 2 2 NJW1164 TYP. MAX. 5.0 1.5 10 10 0.4 100 1.0 300 UNIT V V A A V mA kHz s s s s s s ns s ns s SYMBOL VIH VIL IIH IIL VOL IOL fSCL tBUF tHD:STA tLOW THIGH tSU:STA tHD:DAT tSU:DAT tR tF tSU:STO MIN. 2.5 0 0 -3.0 4.7 4.0 4.7 4.0 4.7 5.0 250 4.0 Pull up resistance 4k (Connected to +5V) Load capacitance 200pF (Connected to GND) SDA tBUF tR tF tHD:STA SCL tHD:STA tLOW P S tHD:DAT tHIGH tSU:DAT Sr tSU:STA tSU:STO P -5- NJW1164 !TERMINAL DESCRIPTION PRELIMINARY No. SYMBOL FUNCTION EQUIVALENT CIRCUIT V+ VOLTAGE 1,30 pin 20k 1 30 INa INb Ach Input terminal Bch Input terminal 80k V+/2 Vref 4 8 23 27 BBE OUTa OUTa OUTb BBE OUTb Ach Output for the Other Accessories Ach Output Bch Output Bch Output for the Other Accessories 50 FB 4, 8 23,27pin V+/2 6k 10pin 10 SS-FIL Simulated Stereo Filter terminal FB V+/2 2 3 28 29 BBE1a BBE2a BBE2b BBE1b Ach BBE Filter1 (Process) Ach BBE Filter2 (Lo Contour) Bch BBE Filter2 (Lo Contour) Bch BBE Filter1 (Process) 2,3 28,29pin FB V+/2 6 25 TONE-Ha TONE-Hb Treble (tone control) filter terminal FB 20k 6, 25pin V+/2 -6- PRELIMINARY !TERMINAL DESCRIPTION NJW1164 VOLTAGE No. SYMBOL FUNCTION EQUIVALENT CIRCUIT 12k 7 24 TONE-La TONE-Lb 7, 24pin Bass (tone control) filter terminal FB 12k V+/2 9 AGC Capacitor connection terminal for AGC attack and recovery time setting 9pin 400 4k 400 - 11 12 CVB CVA Pop Noise Reduction for Volume & Balance 11,12pin 8k - 5V 13 SDA I C data terminal 2 4k 8k 13pin - 5V 14 SCL I C clock terminal 2 4k 8k 14pin - -7- NJW1164 !TERMINAL DESCRIPTION PRELIMINARY No. SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE 5 26 TONE INa TONE INb Ach Input from the Other Accessories Bch Input from the Other Accessories 5,26pin 24k V+/2 212k 21 Vref Reference voltage terminal 21pin 212k V+/2 5V V+ 17 18 AUX0 AUX1 Auxiliary 2 values voltage output terminal 50 17, 18pin 0/5V 20 19 CTH CTL Pop Noise reduction for Bass Control Pop Noise reduction for Treble Control 19pin 36k - 22 SR-FIL Surround filter terminal FB 2k 22pin V+/2 15 16 V+ GND Ground terminal Supply voltage terminal - - -8- PRELIMINARY s APPLICATION CIRCUIT NJW1164 4.7 1 3.3n 33n 4.7 4.7 4.7n 100n 4.7 8 1 100n 4.7 4.7 9 10 11 12 13 14 15 OUTa AGC SS-FIL CVB CVA SDA SCL GND OUTb SR-FIL VREF CTH CTL AUX0 AUX1 Vcc 23 22 21 20 19 18 17 16 2 3 4 5 6 7 INa BBE1a BBE2a BBEOUTa TONEINa TONE-Ha TONE-La INb BBE1b BBE2b 30 29 28 4.7 3.3n 33n 4.7 4.7 4.7n 100n 4.7 BBEOUTb 27 TONEINb TONE-Hb TONE-Lb 26 25 24 100n 4.7 4.7 4.7 22 (NOTE) 2 1. Separate the I C bus line from the following terminals for avoiding digital noise problem. Pin No. Symbol Pin No. Symbol Pin No. Symbol Pin No. Symbol Pin No. 2 BBE1a 6 TONE-Ha 10 SS FIL 24 TONE-Lb 28 3 BBE2a 7 TONE-La 22 SR FIL 25 TONE-Hb 29 Symbol BBE2b BBE1b 2. The constant of capacitors connected to the terminals No.2, 3, 28 and 29 are designated by BBE Sound Inc. Do not change the constant of these capacitors without the approval of BBE Sound Inc. -9- NJW1164 PRELIMINARY s APPLICATION NOTE 1. AGC (Auto Gain Control) Circuit AGC circuit adjusts the input signal level with Boost/Attenuate circuit. AGC boost the low input signal level and attenuate high input signal level automatically. 2 The AGC flat levels (150mV, 300mV, 400mV and 540mV) are selectable via I C bus. (Refer to the following figure.) AGC Control V+=9V, Vin(Ach+Bch), f=1kHz, Vo(Ach)OUTPUT Rg=600, Ta=25oC 1 Output Voltage [Vrms] 540mV 400mV 0.1 AGC ON 300mV 150mV 0.01 AGC OFF 0.001 0.001 0.01 0.1 1 Input Voltage [Vrms] Attack-Recovery Ra=4k Rb=8k 11pin 12pin Ir=0.5A 9pin Cb Ca Smoothing circuit of Attenuate Smoothing circuit of Boost Attack and recovery time in the attenuation processing depends on external part Ca, and it in the boost processing depends on external part Cb. They become longer as the capacity bigger and become shorter as it gets smaller. (Recommendation value: Ca=1F, Cb=4.7F) Reducing the capacity of Ca may cause the distortion. As for Cb, since it serves as the click noise prevention, reducing the capacity may cause the click noise upon volume changing. - 10 - PRELIMINARY 2. Tone Control a) Bass: Setting the Cut-off frequency NJW1164 Bass Filter 12k 12k 8pin 23pin fC = M 2 x C x12k (15dB) (10dB) (5dB) M changes by gain setting of Tone. M 2.65 M 3.45 M 8.10 C b) Treble: Setting the Cut-off frequency Treble Filter fC = N 2 x C x10k N changes by gain setting of Tone. N 0.76 N 0.58 N 0.25 (15dB) (10dB) (5dB) 10k 7pin 24pin C 3. BBE, Surround mode and "OUT" switch settings The click noise may be generated by changing the BBE, Surround mode setting and "OUT" switch. Provide the external circuit for avoiding the click noise on above condition. 4. External parts for BBE circuits The constant of capacitors connected to the terminals No.2, 3, 28 and 29 are designated by BBE Sound Inc. Do not change the constant of these capacitors without the approval of BBE Sound Inc. 5. AUX1, AUX0 Terminal AUX1/0 are enable to control external logic circuit is Source current : 1mA typ. (Ta=25uC) Sink current : 0.5mA typ. (Ta=25uC) 6. Capacitor for Reference Voltage (21pin) 22F should be recommended for ripple filter connected to Vref terminal (21pin). Reducing this capacity may cause to reduce the maximum attenuation level and to increase the output noise. - 11 - NJW1164 s DEFINITION OF I C REGISTER 2 I C BUS FORMAT MSB LSB MSB 2 PRELIMINARY LSB MSB LSB S 1bit Slave Address 8bit A 1bit Select Address 8bit A 1bit Data 8bit A 1bit P 1bit S: Starting Term A: Acknowledge Bit P: Ending Term SLAVE ADDRESS MSB LSB 1 0 0 0 0 1 0 R/W R/W=0: Receive Only R/W=1: No Output Data CONTROL REGISTER TABLE The select address sets each function (Volume, Balance, AGC, Surround, Tone Control, BBE, AUX). The auto increment function cycles the select address as follows. 00H01H02H03H04H05H00H Select Address BIT D7 CHS BCB BCT BBE (Lo Contour) OUT Don't care Don't care D6 D5 D4 VOL BAL BASS TREB D3 D2 D1 AGC D0 SUR 00H 01H 02H 03H 04H 05H BCSB BCST SUB-BASS SUB-TREB BBE (Process) SUR0 AGC1 AGC0 AUX1 AUX0 CONTROL REGISTER DEFAULT VALUE Control register default value is all "0". Select Address BIT D7 0 0 0 0 0 0 D6 0 0 0 0 0 0 D5 0 0 0 0 0 0 D4 0 0 0 0 0 0 D3 0 0 0 0 0 0 D2 0 0 0 0 0 0 D1 0 0 0 0 0 0 D0 0 0 0 0 0 0 00H 01H 02H 03H 04H 05H - 12 - PRELIMINARY !INSTRUCTION CODE a) MASTER VOLUME SETTING Select Address 00H BIT D7 D6 D5 D4 VOL D3 D2 D1 NJW1164 D0 The volume control for both Ach and Bch (0.33dB/step). The volume is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. b) BALANCE, AGC AND SURROUND SETTING Select Address 01H BIT D7 CHS D6 D5 D4 BAL D3 D2 D1 AGC D0 SUR *CHS: Channel select for balance control "0": Ach "Bch is attenuated" "1": Bch "Ach is attenuated" *BAL: Balance control for both Ach and Bch (1dB/Step) The balance is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. *AGC: AGC switch "0": AGC OFF "1": AGC ON *SUR: Surround mode switch "0": Surround OFF "1": Surround ON NOTE) The click noise may be generated by changing the Surround mode setting. Provide the external circuit for avoiding the click noise on above condition. c) TONE CONTROL BASS SETTING Select Address 02H BIT D7 BCB D6 D5 BASS D4 D3 D2 BCSB D1 D0 SUB-BASS *BCB: Boost cut select for Bass control "0": Cut "1": Boost *BASS: BASS control Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) *BCSB: Boost cut select for SUB-BASS control "0": Cut "1": Boost *SUB-BASS: SUB- BASS control (1dB/Step) Sub-Cut Level : -3dB to 0dB(1dB/Step) Sub-Boost Level : 0dB to +3dB(1dB/Step) - 13 - NJW1164 d) TONE CONTROL TREBLE SETTING Select Address 03H PRELIMINARY BIT D7 BCT D6 D5 TREB D4 D3 D2 BCST D1 D0 SUB-TREB *BCT: Boost cut select for Treble control "0": Cut "1": Boost *TREB: Treble control (1dB/step) Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) *BCST: Boost cut select for Sub-Treble control "0": Cut "1": Boost *SUB-TREB: Sub-Treble control (1dB/step) Sub-Cut Level : -3dB to 0dB(1dB/Step) Sub-Boost Level : 0dB to +3dB(1dB/Step) e) BBE Boost Level Setting Select Address 04H BIT D7 D6 D5 D4 D3 D2 D1 D0 BBE (Lo Contour) BBE (Process) * BBE Lo Contour * BBE Process : 0dB to 15dB(1dB/step) : 0dB to 15dB (1dB/step) When all bits are "0"(=00H), BBE becomes off NOTE) The click noise may be generated by changing the BBE setting. Provide the external circuit for avoiding the click noise on above condition. f) OUTPUT AND AUXILIARY SETTING Select Address 05H BIT D7 OUT D6 Don't Care D5 Don't Care D4 SUR0 D3 AGC1 D2 AGC0 D1 AUX1 D0 AUX0 *OUT: ON/OFF Switch for OUTPUT "0" : OFF "1" : ON NOTE) The click noise may be generated by changing the "OUT" switch. Provide the external circuit for avoiding the click noise on above condition. *Surround Setting Surround Function Surround OFF Surround Effect1 Surround Effect2 Simulated Stereo SUR0(05H:D4) 0 0 1 1 SUR(01H:D0), Remarks 0 Input through 1 Surround Effect Small ( 8.0dB typ. ) 1 Surround Effect Large (12.7dB typ. ) 0 For monaural signal input only NOTE) The click noise may be generated by changing the Surround mode setting. Provide the external circuit for avoiding the click noise on above condition. - 14 - PRELIMINARY *AGC Level Setting AGC Level AGC1(D3) 150mVrms 0 300mVrms 0 400mVrms 1 540mVrms 1 *AUX1/AUX0: Auxiliary port High/Low "0": Logic output "Low" "1": Logic output "High" AGC0(D2) 0 1 0 1 NJW1164 - 15 - NJW1164 PRELIMINARY !MASTER VOLUME (Select Address: 00H) VOL Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 HEX FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 D7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 D3 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 D2 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 D1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - 16 - PRELIMINARY !MASTER VOLUME (Select Address: 00H) VOL Gain (dB) -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 -81 -82 -83 -84 Mute HEX 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 0C 09 06 03 00 D7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 D3 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 D2 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 NJW1164 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 - 17 - NJW1164 !BALANCE (Select Address: 01H) Channel Select (CHS) Ach (Bch is attenuated) Bch (Ach is attenuated) D7 0 1 PRELIMINARY BAL Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 Mute D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D4 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D3 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - 18 - PRELIMINARY !TONE CONTROL BASS (Select Address: 02H) Bass Cut or Boost Cut Boost BCB D7 0 1 NJW1164 BASS Cut Gain (dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain (dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D6 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D5 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D4 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D3 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 !TONE CONTROL SUB-BASS (Select Address: 02H) Sub-Bass Cut or Boost Cut Boost BCSB D2 0 1 SUB-BASS Cut Gain (dB) -3 -2 -1 0 Boost Gain (dB) 3 2 1 0 D1 1 1 0 0 D0 1 0 1 0 - 19 - NJW1164 PRELIMINARY !TONE CONTROL TREBLE (Select Address: 03H) Treble Cut or Boost Cut Boost BCT D7 0 1 TREB Cut Gain (dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain (dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D6 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D5 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D4 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D3 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 !TONE CONTROL SUB-TREBLE (Select Address : 03H) Sub-Treble Cut or Boost Cut Boost BCST D2 0 1 SUB-TREB Cut Gain (dB) -3 -2 -1 0 Boost Gain (dB) 3 2 1 0 D1 1 1 0 0 D1 1 0 1 0 - 20 - PRELIMINARY !BBE (Lo Contour) / (Process) Gain Code (Select Address: 04H) Lo Contour Gain (dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D7 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D6 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D5 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D4 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 D3 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Process D2 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 NJW1164 - 21 - NJW1164 !TYPICAL CHARACTERISTICS PRELIMINARY Supply Current vs Supply Voltage Ta=25oC 15 16 Supply Current vs Temparature V+=9V Supply Current [mA] Supply Current [mA] 10 14 12 5 10 0 0 5 10 15 8 0 50 Temparature [oC] 100 Supply Voltage [V] Gain vs Volume Control V+=9V, Vin(Ach)=1Vrms,f=1kHz, OUTPUT,Rg=600 Gain vs Balance Control V+=9V, Vin=1Vrms, f=1kHz, Rg=600 0 0 -20 -40 -20 -40 Vo(Bch) -60 -80 -100 MUTE -30 -30 75, 25, -20oC Vo(Ach) 75, 25, -20oC Gain [dB] -60 -80 -100 75,25,-20 C o Gain [dB] 0 -10 -20 -30 -40 -50 -60 -70 -80 MUTE Volume Control [dB] -20 -10 -20 -10 00 10 -10 20 -20 30 -30 MUT Balance Control [dB] Output Noise vs Volume Control V+=9V, OUTPUT,BW=400-30kHz -60 -70 -80 Gain [dB] -90 -100 -110 Output Noise [dBV] -60 Output Noise vs Temperature V+=9V, Rg=600, BW=400Hz-30kHz -40 Rg=600, Ta=25oC Vol=0dB -80 -100 Vol=MUTE -120 0 -10 -20 -30 -40 -50 -60 -70 -80 MUTE Volume Control [dB] -120 0 50 Temparature [oC] 100 - 22 - PRELIMINARY !TYPICAL CHARACTERISTICS NJW1164 THD+N vs Input Voltage V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT Rg=600, BW=400Hz-30kHz, Ta=25 oC 100 THD+N vs Input Voltage V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT Rg=600, BW=400Hz-30kHz, Vol=-20dB 100 10 THD+N [ % ] -30dB THD+N [ % ] 10 -20oC 25oC 1 1 0.1 -20dB -10dB 0dB 0.1 1 0.1 75oC 0.01 0.01 0.1 1 0.01 0.01 Input Voltage [Vrms] Input Voltage [Vrms] THD+N vs Output Voltage V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT BW=400Hz-30kHz, Rg=600, Ta=25oC 100 100 THD+N vs Output Voltage V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT Rg=600, BW=400Hz-30kHz, Vol=0dB 10 THD+N [ % ] THD+N [ % ] -30dB 1 10 -20oC 25oC 1 0.1 -20dB 0.1 -10dB 1 0dB 0.1 75 oC 0.01 0.01 0.1 1 0.01 0.01 Output Voltage [Vrms] Output Voltage [Vrms] MUTE Level vs Frequency V+=9V, Vin(Ach)=1Vrms, Vol=MUTE Vo(Ach)OUTPUT, Rg=600, Ta=25oC 120 100 MUTE Level [dB] 80 60 40 20 0 100 Channel Separation vs Frequency V+=9V, Vin=2Vrms, f=1kHz, Vo=OUTPUT Rg=600, Vol=0dB, Ta=25oC Channel Separation [dB] 80 60 40 20 0 Vin(Ach)-Vo(Bch) Vin(Bch)-Vo(Ach) 100 1000 Frequency [Hz] 10 4 100 1000 Freqency [Hz] 10 4 - 23 - NJW1164 !TYPICAL CHARACTERISTICS PRELIMINARY Gain vs Frequency (TONE) V+=9V, Vin(Ach)=0.1Vrms,Gv:3dB steps 20 Vo(Ach), Rg=600, Ta=25oC Gain vs Frequency (TONE) V+=9V, Vin(Ach)=0.1Vrms,Gv= +-15dB 20 Vo(Ach), Rg=600, Ta=25oC C(7,24pin) = 47nF, 100nF, 220nF, 470nF 10 Gain [dB] 10 Gain [dB] 470nF 100nF 0 0 220nF 47nF -10 -10 -20 100 1000 Frequency [Hz] 10 4 -20 100 1000 Frequency [Hz] 10 4 Gain vs Frequency (TONE) V+=9V, Vin(Ach)=0.1Vrms,Gv= +-15dB 20 Vo(Ach), Rg=600, Ta=25oC C(6,25pin) = 1nF, 2.2nF, 4.7nF, 10nF AGC Control V+=9V, Vin(Ach+Bch), f=1kHz, Vo(Ach)OUTPUT Rg=600, Ta=25oC 1 540mV 400mV 0.1 300mV 10 Gain [dB] 10nF 2.2nF 0 1nF Output Voltage [Vrms] -10 0.01 150mV OFF 4.7nF -20 100 1000 Frequency [Hz] 10 4 0.001 0.001 0.01 0.1 1 Input Voltage [Vrms] AGC Attack Time (C:9pin=1 F) V+=9V, Vin(Ach+Bch)=1Vrms,f=20kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 2 V+=9V, Vin(Ach+Bch)=1Vrms, f=10kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 0.2 AGC Recovery Time (C:9pin=1 F) Output Voltage [V] 0 Output Voltage [V] 1 0.1 0 -1 -0.1 -2 0 2 4 6 8 10 -0.2 0 100 200 300 400 500 Time [ms] Time [ms] - 24 - PRELIMINARY !TYPICAL CHARACTERISTICS NJW1164 AGC Attack Time (C:9pin=2.2 F) V+=9V, Vin(Ach+Bch)=1Vrms,f=20kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 2 AGC Recovery Time (C:9pin=2.2 F) V+=9V, Vin(Ach+Bch)=1 to 0.05Vrms, f=10kHz, Vo(Ach)OUTPUT,AGC level=0.15V,Rg=600,Ta=25oC 0.2 Output Voltage [V] 0 Output Voltage [V] 1 0.1 0 -1 -0.1 -2 0 2 4 6 8 10 -0.2 0 100 200 300 400 500 Time [ms] Time [ms] AGC Attack Time (C:9pin=0.47 F) V+=9V, Vin(Ach+Bch)=1Vrms,f=20kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 2 AGC Recovery Time (C:9pin=0.47 F) V+=9V, Vin(Ach+Bch)=1 to 0.05Vrms, f=10kHz, Vo(Ach)OUTPUT,AGC level=0.15V,Rg=600,Ta=25oC 0.2 Output Voltage [V] Output Voltage [V] 1 0.1 0 0 -1 -0.1 -2 -0.2 0 2 4 6 8 10 Time [ms] 0 100 200 300 400 500 Time [ms] - 25 - NJW1164 !TYPICAL CHARACTERISTICS PRELIMINARY Gain vs Frequency (eala&Simulated) V+=9V, Vin=0.1Vrms,OUTPUT, Rg=600, 20 Ta=25oC eala AIN-AOUT Phase vs Frequency (Simulated) V+=9V, Vin(A+Bch)=0.1Vrms, Rg=600, 200 150 100 50 0 -50 AchOUT Ta=25oC BchOUT 10 Phase [deg] 4 Gain [dB] 0 Simulated (A+B)IN-AOUT eala AIN-BOUT -10 -20 100 1000 Frequency [Hz] 10 -100 100 1000 Frequency [Hz] 10 4 Gain vs Frequency (BBE) V+=9V, Vin(Ach)=0.1Vrms,Gv=3dB steps 20 15 Phase [deg] OUTPUT,Rg=600, Ta=25oC 200 Phase vs Frequency (BBE) V+=9V, Vin(Ach)=0.1Vrms, Vo(Ach) Gv:3dB steps, Rg=600, Ta=25oC +15 100 +3 0 BBE OFF +15 -100 Gain [dB] 10 5 0 BBE OFF +3 4 -5 100 1000 Frequency [Hz] 10 -200 100 1000 Frequency [Hz] 10 4 - 26 - PRELIMINARY NJW1164 sNOTE The NJW1164 is manufactured by New Japan Radio Co., Ltd. under license from BBE Sound Inc. A license from BBE Sound Inc. is required before the NJW1164 can be purchased from New Japan Radio Co., Ltd. BBE Sound, Inc. 5381 Production Drive Huntington Beach, CA 92649 Tel:(714) 897-6766 Fax:(714) 896-0736 Purchase of I C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies 2 2 conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided that 2 the system conforms to the I C Standard Specification as defined by Philips. 2 [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - 27 - |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |