 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FDG312P February 1999 FDG312P P-Channel 2.5V Specified PowerTrenchTM MOSFET General Description This P-Channel MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize the on-state resistance and yet maintain low gate charge for superior switching performance. These devices are well suited for portable electronics applications. Features * -1.2 A, -20 V. RDS(on) = 0.18 @ VGS = -4.5 V RDS(on) = 0.25 @ VGS = -2.5 V. * * Low gate charge (3.3 nC typical). High performance trench technology for extremely low RDS(ON). Compact industry standard SC70-6 surface mount package. Applications * Load switch * Battery protection * Power management * D D S 1 6 2 5 SC70-6 D D G 3 4 Absolute Maximum Ratings Symbol VDSS VGSS ID PD Drain-Source Voltage Gate-Source Voltage Drain Current - Continuous - Pulsed TA = 25C unless otherwise noted Parameter Ratings -20 (Note 1) Units V V A W 8 -1.2 -6 0.75 0.55 0.48 -55 to +150 Power Dissipation for Single Operation (Note 1a) (Note 1b) (Note 1c) TJ, Tstg Operating and Storage Junction Temperature Range C Thermal Characteristics RJA Thermal Resistance, Junction-to-Ambient (Note 1) 260 C/W Package Outlines and Ordering Information Device Marking .12 Device FDG312P Reel Size 7'' Tape Width 8mm Quantity 3000 units (c)1999 Fairchild Semiconductor Corporation FDG312P Rev. C FDG312P DMOS Electrical Characteristics Symbol Off Characteristics BVDSS BVDSS TJ IDSS IGSSF IGSSR Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage Current, Forward Gate-Body Leakage Current, Reverse (Note 2) TA = 25C unless otherwise noted Parameter Test Conditions VGS = 0 V, ID = -250 A ID = -250 A, Referenced to 25C VDS = -16 V, VGS = 0 V VGS = 8 V, VDS = 0 V VGS = -8 V, VDS = 0 V Min Typ Max Units -20 -19 -1 100 -100 V mV/C A nA nA On Characteristics VGS(th) VGS(th) TJ RDS(on) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance On-State Drain Current Forward Transconductance VDS = VGS, ID = -250 A ID = -250 A, Referenced to 25C VGS = -4.5 V, ID = -1.2 A VGS = -4.5 V, ID = -1.2 A @125C VGS = -2.5 V, ID = -1 A VGS = -4.5 V, VDS = -5 V VDS = -5 V, ID = -1.2 A -0.4 -0.9 2.5 0.135 0.200 0.187 -1.5 V mV/C 0.18 0.29 0.25 ID(on) gFS -3 3.8 A S Dynamic Characteristics Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance (Note 2) VDS = -10 V, VGS = 0 V, f = 1.0 MHz 330 80 35 pF pF pF Switching Characteristics td(on) tr td(off) tf Qg Qgs Qgd Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = -5 V, ID = -0.5 A, VGS = -4.5 V, RGEN = 6 7 12 16 5 15 22 26 12 5 ns ns ns ns nC nC nC VDS = -10 V, ID = -1.2 A, VGS = -4.5 V 3.3 0.8 0.7 Drain-Source Diode Characteristics and Maximum Ratings IS VSD Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage VGS = 0 V, IS = -0.6 A (Note 2) -0.6 -0.83 -1.2 A V Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RJA is determined by the user's board design. a) 170C/W when mounted on a 1 in2 pad of 2oz copper. b) 225C/W when mounted on a half of package sized 2oz. copper. c) 260C/W when mounted on a minimum pad of 2oz copper. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% FDG312P Rev. C FDG312P Typical Characteristics 6 - ID , DRAIN-SOURCE CURRENT (A) 5 4 3 2.4 DRAIN-SOURCE ON-RESISTANCE R DS(on), NORMALIZED V GS= -4.5V -3.5V -3.0V -2.5V 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0 1 2 3 4 5 VGS = -2.0V -2.5V -3.0V -3.5V -4.0V -4.5V -2.0V 2 1 0 -1.5V 0 1 -V DS 6 2 3 4 - I D , DRAIN CURRENT (A) , DRAIN-SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.5 1.6 DRAIN-SOURCE ON-RESISTANCE 1.4 V GS = -4.5V R DS(ON) , ON-RESISTANCE (OHM) I D = -1.2A I D = -0.6A 0.4 R DS(ON), NORMALIZED 1.2 0.3 1 0.2 TJ = 125C 0.8 0.1 T = 25C J 0.6 -50 0 -25 0 25 50 75 100 125 150 1 2 3 4 5 TJ , JUNCTION TEMPERATURE (C) -VGS , GATE TO SOURCE VOLTAGE (V) Figure 3. On-Resistance Variation with Temperature. 4 - I S , REVERSE DRAIN CURRENT (A) 10 Figure 4. On-Resistance Variation with Gate-to-Source Voltage. V DS = -5V -I D , DRAIN CURRENT (A) 3 T = -55C J VGS = 0V 1 25C 125C TJ = 125C 25C -55C 2 0.1 1 0.01 0 0.5 1 1.5 2 2.5 0.001 0.2 0.4 0.6 0.8 1 1.2 1.4 -VGS , GATE TO SOURCE VOLTAGE (V) -VSD , BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDG312P Rev. C FDG312P Typical Characteristics 5 -V GS , GATE-SOURCE VOLTAGE (V) (continued) 1000 I D = -1.2A 4 VDS = -5V -15V CAPACITANCE (pF) -10V 3 300 C iss 100 2 Coss 30 1 C rss f = 1 MHz VGS = 0 V 0 0 1 2 Q g , GATE CHARGE (nC) 3 4 10 0.1 0.2 0.5 1 2 5 10 20 -VDS , DRAIN TO SOURCE VOLTAGE (V) Figure 7. Gate-Charge Characteristics. Figure 8. Capacitance Characteristics. 10 3 1 0.3 0.1 0.03 0.01 0.1 O S( RD IT IM 30 1m s 10m s POWER (W) 10 0m s SINGLE PULSE 24 RJA= 260 C/W TA= 25 C o o -ID, DRAIN CURRENT (A) L N) V GS = -4.5V SINGLE PULSE R JA = 260C/W T A = 25C 0.2 0.5 1 2 1s 10s DC 18 12 6 5 10 20 50 0 0.0001 0.001 0.01 0.1 1 10 100 1000 -VDS , DRAIN-SOURCE VOLTAGE (V) SINGLE PULS E TIME (SEC) Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. 1 r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 0.5 D = 0.5 0.2 R JA (t) = r(t) * R JA R JA =260C/W P(pk) 0.1 0.05 0.1 0.05 0.01 0.02 Single Pulse t1 t2 TJ - TA = P * R JA (t) Duty Cycle, D = t 1 / t 2 0.01 0.005 0.0001 0.001 0.01 0.1 t1 , TIME (sec) 1 10 100 300 Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient themal response will change depending on the circuit board design. FDG312P Rev. C SC70-6 Tape and Reel Data and Package Dimensions SC70-6 Packaging Configuration: Figure 1.0 Customized Label Antistatic Cover Tape Conductive Embossed Carrier Tape F63TNR Label 21 Pin 1 SC70-6 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 3,000 7" Dia 184x187x47 9,000 0.0055 0.1140 D87Z TNR 10,000 13" 343x343x64 20,000 0.0055 0.3960 21 21 21 SC70-6 Unit Orientation 343mm x 342mm x 64mm Intermediate box for D87Z Option F63TNR Barcode Label F63TNR Label F63TNR Label sample 184mm x 184mm x 47mm Pizza Box for Standard Option F63TNR Label LOT: CBVK741B019 FSID: NC7SC05M5 QTY: 3000 SPEC: SC70-6 Tape Leader and Trailer Configuration: Figure 2.0 D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: QARV: (F63TNR)2 Carrier Tape Cover Tape Components Trailer Tape 160mm minimum Leader Tape 390mm minimum December 1998, Rev. B SC70-6 Tape and Reel Data and Package Dimensions, continued SC70-6 Embossed Carrier Tape Configuration: Figure 3.0 T E1 P0 D0 F K0 Wc B0 E2 W Tc A0 P1 D1 User Direction of Feed Dimensions are in millimeter Pkg type SC70-6 (8mm) A0 3.24 +/-0.10 B0 2.34 +/-0.10 W 8.0 +/-0.3 D0 1.55 +/-0.05 D1 1.00 +/-0.125 E1 1.75 +/-0.10 E2 6.25 min F 3.50 +/-0.05 P1 4.0 +/-0.1 P0 4.0 +/-0.1 K0 1.20 +/-0.10 T 0.255 +/-0.150 Wc 5.2 +/-0.3 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximumcomponentrotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SC70-6 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 8mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 2.165 55 4.00 100 Dim W1 0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W2 0.567 14.4 0.567 14.4 Dim W3 (LSL-USL) 0.311 - 0.429 7.9 - 10.9 0.311 - 0.429 7.9 - 10.9 8mm 13" Dia December 1998, Rev. B SC70-6 Tape and Reel Data and Package Dimensions, continued SC70-6 (FS PKG Code 76) 1:1 Scale 1:1 on letter size paper Part Weight per unit (gram): 0.0055 September 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GTOTM DISCLAIMER HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrench QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. E |
Price & Availability of FDG312P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |