|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES 3.3V CMOS 1-TO-10 CLOCK DRIVER IDT74FCT3807/A FEATURES: * * * * * * * * * * * * DESCRIPTION: 0.5 MICRON CMOS Technology Guaranteed low skew < 350ps (max.) Very low duty cycle distortion < 350ps (max.) High speed: propagation delay < 3ns (max.) Very low CMOS power levels TTL compatible inputs and outputs 1:10 fanout Maximum output rise and fall time < 1.5ns (max.) Low input capacitance: 4.5pF typical VCC = 3.3V 0.3V Inputs can be driven from 3.3V or 5V components Available in SSOP, SOIC, and QSOP packages The FCT3807/A 3.3V clock driver is built using advanced dual metal CMOS technology. This low skew clock driver offers 1:10 fanout. The large fanout from a single input reduces loading on the preceding driver and provides an efficient clock distribution network. The FCT3807/A offers low capacitance inputs with hysteresis for improved noise margins. Multiple power and grounds reduce noise. Typical applications are clock and signal distribution. FUNCTIONAL BLOCK DIAGRAM O1 PIN CONFIGURATION IN O2 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC O10 O9 GND O8 VCC O7 GND O6 O5 GND O1 O3 VCC O2 O4 GND O3 O5 IN O6 VCC O4 GND O7 SOIC/ SSOP/ QSOP TOP VIEW O8 O9 O10 The IDT logo is a registered trademark of Integrated Device Technology, Inc. COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES 1 c 2001 Integrated Device Technology, Inc. SEPTEMBER 2001 DSC-4647/2 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES ABSOLUTE MAXIMUM RATINGS(1) Symbol VTERM(2) VTERM(3) VTERM(4) TSTG IOUT Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max -0.5 to +4.6 -0.5 to +7 -0.5 to VCC+0.5 -65 to +150 -60 to +60 Unit V V V C mA CAPACITANCE (TA = +25OC, f = 1.0MHz) Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 4.5 5.5 Max. 6 8 Unit pF pF NOTE: 1. This parameter is measured at characterization but not tested. NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. Input terminals. 4. Outputs and I/O terminals. PIN DESCRIPTION Pin Names IN Ox Clock Inputs Clock Outputs Description POWER SUPPLY CHARACTERISTICS Symbol ICC ICCD Parameter Quiescent Power Supply Current TTL Inputs HIGH Dynamic Power Supply Current(4) Test Conditions(1) VCC = Max. VIN = VCC -0.6V(3) VCC = Max. Input toggling 50% Duty Cycle Outputs Open IC Total Power Supply Current(6) VCC = Max. Input toggling 50% Duty Cycle Outputs Open fi = 50MHz NOTES: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at VCC = 3.3V, +25C ambient. Per TTL driven input (VIN = VCC -0.6V); all other inputs at VCC or GND. This parameter is not directly testable, but is derived for use in Total Power Supply calculations. Values for these conditions are examples of the IC formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ICC DHNT + ICCD (fi) ICC = Quiescent Current (ICCL, ICCH and ICCZ) ICC = Power Supply Current for a TTL High Input (VIN = VCC -0.6V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fi = Input Frequency All currents are in milliamps and all frequencies are in megahertz. Min. -- VIN = VCC VIN = GND -- Typ.(2) 10 0.31 Max. 30 0.45 Unit A mA/ MHz VIN = VCC VIN = GND VIN = VCC -0.6V VIN = GND -- 15.5 22.8 mA -- 15.5 22.8 2 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified Commercial: TA = 0C to +75C, Industrial: TA = -40C to +85C, VCC = 3.3V 0.3V Symbol VIH VIL IIH IIL IOZH IOZL VIK IODH IODL VOH VOL Parameter Input HIGH Level (Input pins) Input HIGH Level (I/O pins) Input LOW Level (Input and I/O pins) Input HIGH Current (Input pins) Input HIGH Current (I/O pins) Input LOW Current (Input pins) Input LOW Current (I/O pins) High Impedence Output Current (3-State Output Pins) Clamp Diode Voltage Output HIGH Current Output LOW Current Output HIGH Voltage Output LOW Voltage VCC = Min., IIN = -18mA VCC = 3.3V, VIN = VIH or VIL, VO = VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOFF IOS VH ICCL ICCH ICCZ NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. This parameter is guaranteed but not tested. 5. VOH = Vcc - 0.6V at rated current. Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VCC = Max. VCC = Max. VI = 5.5V VI = VCC VI = GND VI = GND VO = VCC VO = GND 1.5V(3) Min. 2 2 -0.5 -- -- -- -- -- -- -- -36 50 VCC-0.2 2.4(5) -- -- -- -- -60 -- -- Typ. -- -- -- -- -- -- -- -- -- -0.7 -60 90 -- 3 -- 0.2 0.3 -- -135 150 0.1 Max. 5.5 VCC + 0.5 0.8 1 1 1 1 1 1 -1.2 -110 200 -- -- 0.2 0.4 0.5 1 -240 -- 10 Unit V V A A V mA mA V VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V(3) IOH = -0.1mA IOH = -8mA IOL = 0.1mA IOL = 16mA IOL = 24mA V A mA mV A Input Power Off Leakage Short Circuit Current(4) Input Hysteresis Quiescent Power Supply Current VCC = 0V, VIN = 4.5V VCC = Max., VO = -- VCC = Max. VIN = GND or VCC GND(3) 3 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES SWITCHING CHARACTERISTICS OVER OPERATING RANGE - COMMERCIAL(3,4) FCT3807 Symbol tPLH tPHL tR tF tSK(O) tSK(P) tSK(T) Parameter Propagation Delay Output Rise Time Output Fall Time Output skew: skew between outputs of same package (same transition) Pulse skew: skew between opposite transitions of same output (|tPHL -- tPLH|) Package skew: skew between outputs of different packages at same power supply voltage, temperature, package type and speed grade Conditions(1) 50 to VCC/2 CL = 10pF (See figure 1) or 10 AC termination, CL = 50pF (See figure 2) f 100MHz Outputs connected in groups of two FCT3807 Symbol tPLH tPHL tR tF tSK(O) tSK(P) tSK(T) Parameter Propagation Delay Output Rise Time Output Fall Time Output skew: skew between outputs of same package (same transition) Pulse skew: skew between opposite transitions of same output (|tPHL -- tPLH|) Package skew: skew between outputs of different packages at same power supply voltage, temperature, package type and speed grade FCT3807 Symbol tPLH tPHL tR tF tSK(O) tSK(P) tSK(T) Parameter Propagation Delay Output Rise Time Output Fall Time Output skew: skew between outputs of same package (same transition) Pulse skew: skew between opposite transitions of same output (|tPHL -- tPLH|) Package skew: skew between outputs of different packages at same power supply voltage, temperature, package type and speed grade NOTES: 1. See test circuits and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. 3. tPLH, tPHL, tSK(t) are production tested. All other parameters guaranteed but not production tested. 4. Propagation delay range indicated by Min. and Max. limit is due to VCC, operating temperature and process parameters. These propagation delay limits do not imply skew. FCT3807A Max. 3.5 1.5 1.5 0.5 0.5 0.9 Min.(2) 1.5 -- -- -- -- -- Max. 3 1.5 1.5 0.35 0.35 0.65 Unit ns ns ns ns ns ns Min.(2) 1.5 -- -- -- -- -- FCT3807A Max. 4.5 1.5 1.5 0.5 0.5 1 Min.(2) 1.5 -- -- -- -- -- Max. 4 1.5 1.5 0.35 0.35 0.75 Unit ns ns ns ns ns ns Conditions(1) CL = 30pF f 67MHz (See figure 3) Min.(2) 1.5 -- -- -- -- -- FCT3807A Max. 4.8 1.5 1.5 0.5 0.5 1 Min.(2) 1.5 -- -- -- -- -- Max. 4.3 1.5 1.5 0.35 0.35 0.75 Unit ns ns ns ns ns ns Conditions(1) CL = 50pF f 40MHz (See figure 4) Min.(2) 1.5 -- -- -- -- -- 4 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES SWITCHING CHARACTERISTICS OVER OPERATING RANGE - INDUSTRIAL(3,4) FCT3807 Symbol tPLH tPHL tR tF tSK(O) tSK(P) tSK(T) Parameter Propagation Delay Output Rise Time Output Fall Time Output skew: skew between outputs of same package (same transition) Pulse skew: skew between opposite transitions of same output (|tPHL -- tPLH|) Package skew: skew between outputs of different packages at same power supply voltage, temperature, package type and speed grade Conditions(1) 50 to VCC/2 CL = 10pF (See figure 1) or 50 AC termination, CL = 10pF (See figure 2) f 100MHz Outputs connected in groups of two FCT3807 Symbol tPLH tPHL tR tF tSK(O) tSK(P) tSK(T) Parameter Propagation Delay Output Rise Time Output Fall Time Output skew: skew between outputs of same package (same transition) Pulse skew: skew between opposite transitions of same output (|tPHL -- tPLH|) Package skew: skew between outputs of different packages at same power supply voltage, temperature, package type and speed grade FCT3807 Symbol tPLH tPHL tR tF tSK(O) tSK(P) tSK(T) Parameter Propagation Delay Output Rise Time Output Fall Time Output skew: skew between outputs of same package (same transition) Pulse skew: skew between opposite transitions of same output (|tPHL -- tPLH|) Package skew: skew between outputs of different packages at same power supply voltage, temperature, package type and speed grade NOTES: 1. See test circuits and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. 3. tPLH, tPHL, tSK(t) are production tested. All other parameters guaranteed but not production tested. 4. Propagation delay range indicated by Min. and Max. limit is due to VCC, operating temperature and process parameters. These propagation delay limits do not imply skew. FCT3807A Max. 3.5 1.5 1.5 0.6 0.6 0.9 Min.(2) 1.5 -- -- -- -- -- Max. 3 1.5 1.5 0.45 0.45 0.65 Unit ns ns ns ns ns ns Min.(2) 1.5 -- -- -- -- -- FCT3807A Max. 4.5 1.5 1.5 0.6 0.6 1 Min.(2) 1.5 -- -- -- -- -- Max. 4 1.5 1.5 0.45 0.45 0.75 Unit ns ns ns ns ns ns Conditions(1) CL = 30pF f 67MHz (See figure 3) Min.(2) 1.5 -- -- -- -- -- FCT3807A Max. 4.8 1.5 1.5 0.6 0.6 1 Min.(2) 1.5 -- -- -- -- -- Max. 4.3 1.5 1.5 0.45 0.45 0.75 Unit ns ns ns ns ns ns Conditions(1) CL = 50pF f 40MHz (See figure 4) Min.(2) 1.5 -- -- -- -- -- 5 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES TEST CIRCUITS VCC VCC 100 VCC VIN Pulse Generator RT D.U.T. VOUT Pulse Generator 10pF 100 VIN D.U.T. VOUT 50 RT 220pF 10pF Figure 1. ZO = 50 to VCC/2, CL = 10pF Figure 2. ZO = 50 AC Termination, CL = 10pF The capacitor value for ac termination is determined by the operating frequency. For very low frequencies a higher capacitor value should be selected. VCC VCC VIN Pulse Generator RT D.U.T. VOUT Pulse Generator 30pF CL VIN D.U.T. VOUT 50pF RT CL Figure 3. CL = 30pF Circuit Figure 3. CL = 50pF Circuit 6V VCC GND 500 VIN Pulse Generator RT D.U.T. 50pF CL 500 VOUT ENABLE AND DISABLE TIME SWITCH POSITION Test Disable LOW Enable LOW Disable HIGH Enable HIGH Switch 6V GND Figure 5. Enable and Disable Time Circuit DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. 6 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES TEST WAVEFORMS 3V 1.5V INPUT tPLH tPHL VOH 2.0V OUTPUT tR tF 0.8V 1.5V VOL OUTPUT 2 tPLH2 tPHL2 OUTPUT 1 tSK(o) tSK(o) 0V INPUT 3V 1.5V 0V VOH 1.5V VOL VOH 1.5V VOL tPLH1 tPHL1 tSK(o) = |tPLH2 - tPLH1| or |tPHL2 - tPHL1| Package Delay Output Skew - tSK(O) 3V 3V 1.5V INPUT tPLH tPHL VOH 1.5V OUTPUT tSK(p) = |tPHL - tPLH| VOL PACKAGE 2 OUTPUT tPLH2 tPHL2 or INPUT tPLH1 tPHL1 1.5V 0V VOH 1.5V VOL 0V PACKAGE 1 OUTPUT tSK(t) tSK(t) VOH 1.5V VOL tSK(t) = |tPLH2 - tPLH1| |tPHL2 - tPHL1| Pulse Skew - tSK(P) Package Skew - tSK(T) Package 1 and Package 2 are same device type and speed grade ENABLE DISA BLE 3V CONTROL INPUT t OUTPUT NORM ALLY LOW PZL 1.5V 0V t 3.5V 1.5V 0.3V t 1.5V 0V 0V PHZ PLZ SW ITCH CLOSE D t PZH 3.5V V OL V OH OUTPUT NORM ALLY HIGH SW ITCH OPEN 0.3V Enable and Disable Times NOTES: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH 2. Pulse Generator for All Pulses: f 1.0MHz; tF 2.5ns; tR 2.5ns 7 IDT74FCT3807/A 3.3V CMOS 1-TO-10 CLOCK DRIVER COMMERCIAL/INDUSTRIAL TEMPERATURE RANGES ORDERING INFORMATION IDT74FCT XXXX Device Type X Package X Temp. Range Blank I Commercial (0C to +70C) Industrial (-40C to +85C) SO PY Q 3807 3807A Small Outline IC Shrink Small Outline IC Quarter-size Small Outline IC 1-to-10 3.3V Clock Driver CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com for Tech Support: logichelp@idt.com (408) 654-6459 8 |
Price & Availability of IDT74FCT3807A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |