| PART |
Description |
Maker |
| TC1270 TC1270FERC TC1270LERC TC1270MERC TC1270RERC |
4-Pin μP Reset Monitors
4-Pin P Reset Monitors
4-Pin レP Reset Monitors
TC1270 and TC1271 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal ...
|
MICROCHIP[Microchip Technology]
|
| IMP1233D IMP1810 IMP1811 IMP1812 IMP1815 IMP1816 I |
4.125V power reset
RELAY 024VDC 01A DPDT-XX FORM:2C UC
Bi-Lobe Standard Metal Shell Nano Offset Connector
Low Power 5V/3.0V P Reset
Low Power/ 5V/ P Reset
Low Power, 5V, 楼矛P Reset
Low Power 5V P Reset
Low Power, 5V, P Reset
Low Power, 5V, μP Reset
4.375V power reset
|
IMP INC.
IMP Inc
IMP[IMP, Inc]
IMP[IMP Inc]
|
| MC54F242J MC54F243J MC54_74F242 MC74F243 ON1263 MC |
Supply Voltage Supervisor w/Watchdog input, RESET, /RESET 5-SOT-23 -40 to 85 F/FAST SERIES, 4-BIT TRANSCEIVER, TRUE OUTPUT, PDSO14
Automotive Catalog Supply Voltage Supervisor w/Watchdog Input, RESET, /RESET 5-SOT-23 -40 to 125
(MC74F242 / MC74F243) QUAD BUS TRANSCEIVERS WITH 3-STATE OUTPUTS FAST SCHOTTKY TTL
From old datasheet system
|
Motorola Mobility Holdings, Inc.
Motorola, Inc.
MOTOROLA[Motorola Inc]
ON Semi
|
| MAX6332UR20D3-T MAX6333UR20D3-T MAX6334UR20D3-T MA |
Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 20ms.
3-Pin, Ultra-Low-Voltage, Low-Power P Reset Circuits
3-Pin, Ultra-Low-Voltage, Low-Power μP Reset Circuits
3-Pin Ultra-Low-Voltage Low-Power P Reset Circuits
From old datasheet system
3-Pin, Ultra-Low-Voltage, Low-Power レP Reset Circuits
3-Pin / Ultra-Low-Voltage / Low-Power P Reset Circuits
TV 79C 79#22D SKT RECP 3引脚，超低电压，低功耗レP复位电路
Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 1ms.
|
MAXIM - Dallas Semiconductor
http://
Maixm
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
Maxim Integrated Produc...
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| S24023SB |
Precision RESET Controller and 4K I2C Memory With Both RESET and RESET Outputs 精密复位控制器和4K的I2C既复位和复位输出记忆
|
Summit Microelectronics, Inc.
|
| TC1278 TC1279 TC1278-10ENBTR TC1278-15ENBTR TC1278 |
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset ...
|
Microchip
|
| MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
CPU / System Supervisors
Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
Microchip Technology, Inc.
|
| PST611 PST611XM |
System Reset Monolithic IC PST611
System Reset Monolithic IC PST611
|
MITSUMI ELECTRIC
Mitsumi Electronics, Corp.
|
| MM1075 |
System Reset (with built-in watchdog timer)
From old datasheet system
|
Mitsumi
|
| PST9139 PST9142 PST91XX PST91XXN PST9121 PST9122 P |
System Reset 系统复位
From old datasheet system
|
MITSUMI ELECTRIC CO., LTD.
MITSUMI[Mitsumi Electronics, Corp.]
MITSUMI ELECTRIC CO LTD
|
