| |
|
 |
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
|
| Part No. |
MAX2308EVKIT MAX2306EVKIT MAX2309EVKIT
|
| OCR Text |
...ctions provide instructions for getting the EV kit running in CDMA mode. CDMA Mode Perform the following steps to evaluate the MAX2306/ MAX2308/MAX2309 in CDMA mode: 1) Verify that shunts JU3, JU10, and JU11 are in place.
Table 1. Recomm... |
| Description |
Evaluation Kits for the MAX2306/MAX2308/MAX2309
|
| File Size |
579.28K /
12 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Motorola
|
| Part No. |
MC145572EVK
|
| OCR Text |
.... . . . . . . . . . . . . . . . getting STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5 5 7 7 7 7 8 8
1.4 1.5
SECTION 2 HARDWARE REFERENCE
2.1 U-INTERFACE . . . . . . . . . ... |
| Description |
ISDN U-Interface Transceiver Evaluation Kit
|
| File Size |
264.40K /
52 Page |
View
it Online |
Download Datasheet |
| |
|
|
Motorola
|
| Part No. |
MC145576EVK
|
| OCR Text |
...gisters and gated clocks.
V. getting Started Jumpers configuration: JP8: jumper to short circuit the C13 capacitor. JP9: jumper to terminate the S/T loop transmit path with an 100 Ohms resistor. JP10: jumper to terminate the S/T loop rec... |
| Description |
ISDN Single-Chip NT1 Transceiver Evaluation Kit
ISDN Single chip NT1 Transceiver Evaluation Kit
|
| File Size |
84.51K /
5 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM[Maxim Integrated Products]
|
| Part No. |
MAX2150EVKIT MAX2150_1 MAX2150 MAX21501
|
| OCR Text |
...s step-by-step instructions for getting the EV kit up and running in all operation modes. 1) Verify that jumpers are in place. 2) Verify that the interface board is in place.
Note 1: This IC has an exposed pad. It must be solder attached... |
| Description |
Evaluation Kit for the MAX2150
|
| File Size |
400.32K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM[Maxim Integrated Products]
|
| Part No. |
MAX2511EVKIT MAX2511EVKIT-SO MAX25111 MAX2511
|
| OCR Text |
...s step-by-step instructions for getting the EV kit up and running in both Tx and Rx modes.
Tx Mode Perform the following steps to evaluate the MAX2511 in Tx mode: 1) Make the DC connections: set the power supply to 3V with a 100mA curren... |
| Description |
Evaluation Kit for the MAX2511
|
| File Size |
129.14K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX2821EVKIT MAX2820EVKIT
|
| OCR Text |
...s step-by-step instructions for getting the EV kit up and running in all modes: 1) To control the MAX2820/MAX2821 through the 3-wire interface, connect the male-to-male 25-pin parallel cable between the PC and EV kit. 2) With the power supp... |
| Description |
Evaluation Kits for the MAX2820/MAX2821
|
| File Size |
1,122.76K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
Dallas
|
| Part No. |
DS1701K 1701K
|
| OCR Text |
...e. If you experience difficulty getting the program to initialize, it may require that you change COM ports to see if this is the problem. Figure 3.0 COM Port and Resolution Menu
The user is required to write the appropriate setting to t... |
| Description |
1-Wire Temperature Sensor Evaluation Kit
From old datasheet system
|
| File Size |
285.02K /
7 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
